u-blox NEO-7M Satellite Positioning GPS Module with Micro USB is a multi-GNSS satellite positioning receiver featuring the high-performance u-blox 7 engine. Delivering enhanced sensitivity down to -162 dBm and fast satellite acquisition times, this module incorporates both standard 2.54mm UART header pins and an onboard Micro USB port, allowing developers to configure parameters via u-center software or interface directly with microcontrollers and flight computers.
Key Features:
- High-Performance u-blox 7 Core: Advanced 56-channel positioning architecture tracks GPS, GLONASS, and QZSS constellations.
- Integrated Micro USB Interface: Plugs directly into PC or Raspberry Pi USB ports for real-time diagnostics and testing.
- Dual Antenna Interfaces: Comes with a high-gain 25mm ceramic patch antenna and an onboard IPEX micro-connector.
- Battery-Backed Non-Volatile Memory: Onboard I2C EEPROM stores baud and rate settings; coin battery retains satellite almanac.
- Ultra-Low Power Consumption: Power Save Mode reduces power consumption while sustaining reliable tracking.
- Onboard PPS Signal LED: Dedicated PPS LED pulses once per second upon achieving stable 3D satellite lock.
Technical Specifications:
- Operating Voltage: 3.3V to 5.0V DC
- Operating Current: 35 mA (typical)
- Receiver Channels: 56 tracking channels
- Velocity Accuracy: 0.1 m/s
- Horizontal Position Accuracy: 2.5 meters CEP
- Default Baud Rate: 9600 bps
- Maximum Navigation Rate: Up to 10 Hz
- Operating Temperature: -40°C to +85°C
Mechanical Specifications:
- Form Factor: Compact rectangular evaluation board
- Connector: Micro USB Type-B female and 5-pin 2.54mm header
- Mounting: 4 corner M3 mounting holes
- Weight: Approximately 19 grams (including antenna)
Dimensions:
- Module Length: 39.0 mm
- Module Width: 26.0 mm
- Antenna Dimensions: 25.0 × 25.0 × 8.0 mm
Pinout and Wiring:
- VCC: 3.3V to 5.0V DC Power Input
- GND: Ground (0V)
- TXD: UART Serial Transmit Output
- RXD: UART Serial Receive Input
- PPS: 1 Pulse Per Second Time Stamp Output
Datasheet Reference:
- Datasheet Reference: Consult u-blox 7 Receiver Description and NEO-7M Hardware Integration Manual for complete register sets.
Commonly Used in:
- Multirotor quadcopters and fixed-wing autonomous flight controllers
- In-vehicle fleet tracking units and telematics gateways
- Outdoor robotic rover navigation and perimeter survey bots
- Precision digital chronometer and NTP clock servers
Applications:
- UAV return-to-home fail-safe navigation
- Asset tracking over GSM/LoRa radio networks
- Speedometer and distance calculation for electric bicycles and sports gear
- Geographic data stamping for drone photogrammetry
Equivalent Models:
- u-blox NEO-6M GPS Module
- u-blox NEO-8M GNSS Module
- VK-162 USB GPS Dongle
Package Includes:
- 1 × u-blox NEO-7M Satellite Positioning GPS Module with Micro USB



Reviews
No reviews yet. Be the first to share your experience!