Back to Category
Shop By Departments

u-blox NEO-8M Satellite Positioning GPS Module with Micro USB

₹999.00

In stock ?

In stock

SKU: BR2-IFT-23-05 Category: Brand:

u-blox NEO-8M Satellite Positioning GPS Module with Micro USB is a next-generation high-precision multi-GNSS satellite receiver module engineered with the u-blox M8 positioning engine. Concurrently tracking GPS, GLONASS, Galileo, BeiDou, and QZSS constellations, this module delivers rapid cold-start acquisition and superior positioning reliability even in dense urban canyons, complete with an onboard Micro USB debugging port and 2.54mm UART interface.

Key Features:
  • Concurrent Multi-GNSS Reception: Simultaneously receives GPS/QZSS, GLONASS, and BeiDou signals for enhanced positioning fix.
  • Rapid Time-To-First-Fix: Assisted GNSS support and high-gain ceramic antenna ensure fast satellite acquisition under challenging conditions.
  • Micro USB Diagnostic Interface: Directly connects to PC for rapid setup, evaluation, and configuration using u-blox u-center.
  • Onboard Configuration EEPROM: Retains custom baud rates, update frequencies, and constellation preferences across power cycles.
  • Rechargeable Backup Battery: Powers internal RTC and SRAM to guarantee rapid warm and hot satellite re-acquisition.
  • Low Noise Amplifier (LNA): Integrated front-end LNA guarantees exceptional signal sensitivity down to -167 dBm.
Technical Specifications:
  • Operating Voltage: 3.3V to 5.0V DC
  • Current Consumption: 40 mA to 60 mA during acquisition
  • Supported Constellations: GPS, GLONASS, Galileo, BeiDou, SBAS, QZSS
  • Position Accuracy: 2.0 meters CEP
  • Navigation Update Rate: Up to 10 Hz (concurrent GNSS)
  • Tracking Sensitivity: -167 dBm
  • Communication Interfaces: UART (default 9600 bps) and Micro USB
  • Operating Temperature: -40°C to +85°C
Mechanical Specifications:
  • PCB Structure: Double-sided through-hole FR-4 circuit board
  • Antenna Connection: Onboard IPEX / U.FL connector with external patch antenna
  • Mounting: 4 × M3 corner mounting holes
  • Weight: Approximately 20 grams (with ceramic antenna)
Dimensions:
  • Module Length: 39.0 mm
  • Module Width: 26.0 mm
  • Height: 8.0 mm
Pinout and Wiring:
  • VCC: 3.3V – 5.0V DC Main Power Supply
  • GND: System Ground Reference (0V)
  • TX: UART Serial Transmit Output (TTL logic)
  • RX: UART Serial Receive Input (TTL logic)
  • PPS: Hardware Pulse-Per-Second synchronization signal
Datasheet Reference:
  • Datasheet Reference: Refer to u-blox M8 Receiver Description and NEO-M8 Series Protocol Specification for comprehensive NMEA and UBX messages.
Commonly Used in:
  • APM, Pixhawk, and INAV drone autonomous waypoint flight controllers
  • Industrial precision vehicle telemetry and asset monitoring
  • High-altitude balloon atmospheric research instrumentation
  • Autonomous agricultural robot positioning
Applications:
  • Drone mission waypoint following and automatic return-to-home (RTH)
  • Real-time vehicle speed, altitude, and heading telemetry
  • Time synchronization for distributed embedded networks
  • Geotagging for aerial photography and environmental surveys
Equivalent Models:
  • u-blox NEO-M8N High Precision GPS Module
  • u-blox NEO-7M GPS Module
  • Beitian BN-880 GPS with Compass
Package Includes:
  • 1 × u-blox NEO-8M Satellite Positioning GPS Module with Micro USB
Weight 20 g
Dimensions 40 × 25 × 10 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “u-blox NEO-8M Satellite Positioning GPS Module with Micro USB”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

u-blox NEO-8M Satellite Positioning GPS Module with Micro USB

u-blox NEO-8M Satellite Positioning GPS Module with Micro USB

₹999.00
Hi, How can I help you today?
Chat Assistant