Back to Category
Shop By Departments

Micro NZ GPS Module for NAZE32 / Flip32 / CC3D Flight Controllers

₹820.00

In stock ?

In stock

SKU: IFT00166-5 Category: Tags: , , Brand:

Micro NZ GPS Module for NAZE32 / Flip32 / CC3D Flight Controllers is an ultra-miniaturized satellite positioning receiver engineered specifically for mini 250-class FPV racing drones and micro aerial platforms running Cleanflight, Betaflight, or Baseflight firmware. Weighing only 8 grams, it equips compact NAZE32, Flip32, CC3D, and OPLink flight controllers with real-time GPS telemetry, coordinate coordinates, and return-to-home navigation capabilities.

Key Features:
  • Ultra-Compact Micro Footprint: Minimal 26×25mm footprint fits neatly onto tight micro quadcopter top plates.
  • Pre-Wired for NAZE32 & Flip32: Includes a dedicated pre-crimped silicone wiring harness for direct connection to flight controller UART ports.
  • Cleanflight & Betaflight Ready: Optimized for standard Cleanflight, Betaflight, and iNav GPS rescue and telemetry modes.
  • Integrated Ceramic Patch Antenna: Efficient compact ceramic patch antenna provides reliable reception in a tiny physical volume.
  • Onboard Backup Battery: Built-in micro rechargeable cell preserves satellite almanac data for fast hot-start satellite acquisition.
  • Super Lightweight: Adds minimal mass to racing quadcopters, preserving motor responsiveness and battery runtime.
Technical Specifications:
  • Operating Voltage: 3.3V to 5.0V DC
  • Operating Current: 35 mA to 45 mA
  • Supported Firmware: Cleanflight, Betaflight, Baseflight, iNav
  • Serial Interface: UART TTL (Default 9600 bps or 115200 bps configurable)
  • Protocol: NMEA / UBLOX binary format
  • Position Accuracy: 2.5 meters CEP
  • Update Rate: 1 Hz to 5 Hz
  • Operating Temperature: -20°C to +70°C
Mechanical Specifications:
  • Form Factor: Bare PCB with bottom foam insulation pad
  • Cable: 4-pin micro JST-SH silicone wiring pigtail
  • Weight: Approximately 8 grams (including cable)
Dimensions:
  • Length: 26.0 mm
  • Width: 25.0 mm
  • Height: 8.0 mm
Pinout and Wiring:
  • VCC (Red): +5V DC Power Input
  • GND (Black): Ground (0V)
  • TX (White/Yellow): GPS UART Transmit (connects to Flight Controller RX)
  • RX (Green/Blue): GPS UART Receive (connects to Flight Controller TX)
Datasheet Reference:
  • Datasheet Reference: Consult Cleanflight / Betaflight GPS Configuration Documentation and standard u-blox NMEA reference guides.
Commonly Used in:
  • QAV250, ZMR250, and 210-class mini FPV quadcopters
  • NAZE32, CC3D Revolution, and Flip32 flight controllers
  • Micro long-range FPV exploration drones
  • Lightweight RC gliders and flying wings
Applications:
  • Real-time GPS coordinate display on FPV On-Screen Display (OSD)
  • Betaflight GPS Rescue mode for lost drone retrieval
  • Ground speed, distance-from-home, and altitude telemetry
  • Autonomous return-to-home navigation on micro platforms
Equivalent Models:
  • Beitian BN-180 Micro GPS Module
  • Beitian BN-220 Micro GPS Module
  • Matek SAM-M8Q Micro GPS Module
Package Includes:
  • 1 × Micro NZ GPS Module for NAZE32 / Flip32 / CC3D Flight Controllers
Weight 10 g

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “Micro NZ GPS Module for NAZE32 / Flip32 / CC3D Flight Controllers”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

You may also like…

Micro NZ GPS Module for NAZE32 / Flip32 / CC3D Flight Controllers

Micro NZ GPS Module for NAZE32 / Flip32 / CC3D Flight Controllers

₹820.00
Hi, How can I help you today?
Chat Assistant