GT-U7 GPS Satellite Positioning Module Compatible with NEO-6M is a high-sensitivity satellite navigation positioning module engineered with low power consumption and high geolocation accuracy. Fully pin-compatible with standard NEO-6M footprints, it integrates an onboard IPEX micro-coaxial connector, active patch antenna, and high-gain low noise amplifier (LNA), delivering rapid Time-to-First-Fix (TTFF) and continuous NMEA positioning data via standard UART serial communication.
Key Features:
- High-Sensitivity Satellite Reception: Advanced navigation core tracks GPS and SBAS signals down to -162 dBm sensitivity.
- NEO-6M Pin Compatibility: Standard 5-pin 2.54mm pitch layout allows seamless drop-in replacement for NEO-6M boards.
- Micro USB and UART Connectivity: Onboard Micro USB port allows direct PC plug-and-play GPS evaluation and telemetry streaming.
- Internal EEPROM and Backup Battery: Built-in rechargeable backup cell and EEPROM retain satellite ephemeris data for warm/hot starts.
- Dual Antenna Capability: Integrated onboard ceramic patch antenna alongside an external IPEX active antenna socket.
- PPS Timing Pulse Output: Precise 1PPS (Pulse-Per-Second) output LED and pin for ultra-accurate hardware clock synchronization.
Technical Specifications:
- Operating Voltage: 3.3V to 5.0V DC (onboard LDO regulator)
- Operating Current: 35 mA to 50 mA during active tracking
- Default Baud Rate: 9600 bps (configurable up to 115200 bps)
- Output Protocol: NMEA 0183 standard sentences (GGA, GLL, GSA, GSV, RMC, VTG)
- Update Rate: 1 Hz to 5 Hz navigation update rate
- Position Accuracy: 2.5 meters CEP (Circular Error Probable)
- Tracking Sensitivity: -162 dBm
- Operating Temperature: -40°C to +85°C
Mechanical Specifications:
- PCB Material: FR-4 double-sided fiberglass board
- Header Type: 5-Pin 2.54mm pitch straight pin header
- Antenna Type: 25 × 25 mm ceramic patch antenna with IPEX connector
- Weight: Approximately 18 grams (including antenna)
Dimensions:
- Module Length: 27.6 mm
- Module Width: 26.6 mm
- Antenna Dimensions: 25.0 × 25.0 × 8.0 mm
Pinout and Wiring:
- VCC: 3.3V to 5.0V DC Main Power Input
- GND: System Ground (0V)
- TXD: UART Serial Data Output (connects to MCU RX)
- RXD: UART Serial Data Input (connects to MCU TX)
- PPS: Time Pulse Output (1 Pulse Per Second for RTC sync)
Datasheet Reference:
- Datasheet Reference: Consult GT-U7 Hardware Integration Guide and standard NMEA-0183 protocol reference for serial commands.
Commonly Used in:
- Autonomous drone flight controllers and unmanned aerial vehicles (UAVs)
- Fleet management vehicle tracking and GPS asset monitoring
- Arduino and Raspberry Pi handheld navigation instruments
- High-precision network time protocol (NTP) server clock sync
Applications:
- Vehicle real-time tracking and geo-fencing speed telemetry
- Autonomous robotics outdoor path planning and waypoint navigation
- Agricultural smart farming equipment guidance
- Hiking and marine location coordinate logging
Equivalent Models:
- u-blox NEO-6M GPS Module
- u-blox NEO-7M Satellite Positioning Module
- Quectel L80-M39 GPS Breakout Module
Package Includes:
- 1 × GT-U7 GPS Satellite Positioning Module Compatible with NEO-6M

Reviews
No reviews yet. Be the first to share your experience!