Back to Category
Shop By Departments

Clear Acrylic Ultrasonic Sensor Mounting Bracket for HC-SR04

₹18.00

In stock ?

In stock

SKU: SR-12-004 Category: Brand:

Clear Acrylic Ultrasonic Sensor Mounting Bracket for HC-SR04 is a precision laser-cut transparent acrylic mounting bracket and standoff fixture engineered specifically to securely hold and orient standard dual-transducer ultrasonic sensors (HC-SR04, HY-SRF05, US-015, US-016) on mobile robot chassis, servo motor horns, and wall fixtures. Fabricated from 2.8 mm thick high-clarity cast acrylic, it features dual circular cutouts precisely spaced to cradle the 16 mm diameter ultrasonic transmitter and receiver cans with a snug friction fit. Equipped with pre-drilled bottom flange mounting holes, it permits rigid mechanical fastening directly to 2WD/4WD smart robot car platforms, micro servo motor horns (SG90, MG90S) for pan-and-tilt sonar scanning, or aluminum maker frames.

Key Features:
  • Precision Laser-Cut Geometry: Engineered with calibrated 16.2 mm circular cutouts perfectly matched to standard HC-SR04 / HY-SRF05 transducer housings.
  • High-Clarity Cast Acrylic: Crystal-clear transparent aesthetic blends seamlessly into custom robotic projects without obstructing onboard sensor status LEDs.
  • Servo Motor Horn Compatible: Base mounting holes align with standard micro servo (SG90 / MG90S) cross horns to build sweeping 180° radar scanning mechanisms.
  • Rigid Vibration-Resistant Support: 2.8 mm thick acrylic prevents acoustic sensor wobble and directional deflection during rapid mobile robot acceleration.
  • Protective Surface Film: Shipped with protective peel-off paper masking to prevent scratches and abrasions during assembly and transport.
Technical Specifications:
  • Material: High-grade optical cast acrylic (PMMA)
  • Material Thickness: 2.8 mm ± 0.2 mm
  • Transducer Cutout Diameter: 16.2 mm (Fits dual 16 mm transducers)
  • Center-to-Center Cutout Spacing: 26.0 mm
  • Base Mounting Hole Diameter: 2.5 mm to 3.0 mm (Accommodates standard M2 / M3 hardware)
  • Compatible Ultrasonic Modules: HC-SR04, HY-SRF05, US-015, US-016, US-020, and pin-compatible clones
  • Compatible Servos: TowerPro SG90, MG90S, and equivalent 9g micro servo horns
  • Operating Temperature: -20°C to +85°C
Mechanical Specifications:
  • Structure: L-shaped right-angle mounting bracket with base flange
  • Color / Appearance: High-transparency clear acrylic
  • Fastener Mounting: 2 × base flange mounting holes for M2/M3 screws or servo horn rivets
  • Net Weight: Approx. 6.5 g
Dimensions:
  • Front Face Height: 35.0 mm
  • Front Face Width: 50.0 mm
  • Base Flange Depth: 15.0 mm
  • Material Thickness: 2.8 mm
  • Transducer Hole Diameter: 16.2 mm
Pinout and Wiring:
  • Mechanical Assembly Guide: Peel away the protective brown masking paper from both acrylic faces before installation.
  • Sensor Insertion: Gently press the two aluminum cylinders of your HC-SR04 module through the front cutouts until the sensor PCB sits flush against the rear face.
  • Chassis / Servo Mounting: Fasten the horizontal base flange to your robot chassis or SG90 servo horn using M2/M3 machine screws and nuts.
Datasheet Reference:
  • Clear Acrylic HC-SR04 Ultrasonic Sensor Mounting Bracket Mechanical CAD Dimensions and SG90 Pan-Tilt Integration Guide.
Commonly Used in:
  • 2WD and 4WD smart robot car obstacle avoidance chassis kits.
  • Pan-and-tilt servo radar scanners and sweeping ultrasonic sonar turrets.
  • Automated wall-following mobile robots and maze-solving robot competitions.
  • Water tank top-cover standoff brackets for downward-facing liquid level sensors.
Applications:
  • Rigid Sensor Orientation: Ensuring the ultrasonic beam points dead-ahead perpendicular to the robot drive axis for accurate obstacle ranging.
  • Pan-Tilt Radar Scanning: Mounting atop an SG90 servo motor to rotate the sensor 180° for directional path mapping.
  • Chassis Protection: Preventing physical shock and transducer misalignment when robots bump into low obstacles.
  • Clean Prototyping Aesthetics: Providing professional, transparent hardware mounting for educational STEM robotics exhibitions.
Equivalent Models:
  • Red Acrylic HC-SR04 Bracket: High-visibility red tinted acrylic variant offering an eye-catching mechanical accent.
  • 3D-Printed PLA Sensor Bracket: Customized additive manufacturing bracket for bespoke robot chassis geometry.
  • Aluminum HC-SR04 Sensor Mount: Heavy-duty stamped metal bracket for industrial mobile rovers.
Package Includes:
  • 1 × Clear Acrylic Ultrasonic Sensor Mounting Bracket for HC-SR04
Weight 5 g

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “Clear Acrylic Ultrasonic Sensor Mounting Bracket for HC-SR04”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

Clear Acrylic Ultrasonic Sensor Mounting Bracket for HC-SR04

Clear Acrylic Ultrasonic Sensor Mounting Bracket for HC-SR04

₹18.00
Hi, How can I help you today?
Chat Assistant