HY-SRF05 Precision Ultrasonic Distance Ranging Sensor Module is an upgraded high-precision acoustic distance ranging module engineered as an enhanced, backward-compatible evolution of the standard HC-SR04 sensor. Featuring dual operational modes (standard 4-pin dual-pin mode and an optional single-pin combined trigger/echo mode), it accurately detects obstacles and measures distances from 2 cm up to 450 cm (4.5 meters) with a high calibration resolution of 2 mm. Operating on a 5V DC supply, it emits an 8-cycle 40 kHz ultrasonic burst upon receiving a 10 μs TTL trigger pulse, outputting a high-level echo pulse whose duration is directly proportional to acoustic time-of-flight. Designed with improved noise immunity and narrower beam divergence, it is the premier choice for robotics navigation, collision avoidance, and automated tank level monitoring.
Key Features:
- Extended 4.5 Meter Detection Range: Measures distances reliably from 2 cm up to 450 cm with high linearity, exceeding the 4.0-meter limit of standard HC-SR04 modules.
- High Precision 2mm Resolution: Advanced analog front-end circuitry provides exceptional measurement repeatability with accuracy within ±3 mm.
- Dual Trigger Interface Modes: Supports standard 4-pin separate Trigger/Echo mode as well as single-pin shared Trigger/Echo mode (via OUT pin configuration) to conserve microcontroller I/O pins.
- Backward Compatible with HC-SR04: Fully pin-compatible with standard 4-pin HC-SR04 code libraries and mounting brackets.
- Narrow 15-Degree Detection Cone: Tight directional sensitivity minimizes false boundary echoes from surrounding walls and floors.
Technical Specifications:
- Operating Supply Voltage: 5.0 V DC (4.5V to 5.5V DC)
- Quiescent Current Consumption: < 2 mA
- Active Operating Current: 15 mA (during 40 kHz pulse transmission)
- Operating Acoustic Frequency: 40.0 kHz ± 1.0 kHz
- Measurement Distance Range: 2 cm to 450 cm
- Measurement Resolution: 2 mm (0.2 cm)
- Measurement Accuracy: ±3 mm
- Trigger Input Signal: 10 μs TTL high pulse
- Echo Output Signal: TTL level pulse (Duration = Time-of-Flight; Distance = Echo Time × 340 m/s ÷ 2)
- Measuring Angle: ≤ 15 Degrees conical angle
- Operating Temperature Range: -20°C to +70°C
Mechanical Specifications:
- Board Construction: High-grade double-sided FR-4 PCB with blue solder mask
- Transducers: Dual 16 mm matched aluminum mesh 40 kHz piezoelectric transducers
- Pin Header: 5-pin straight male header with 2.54 mm pitch
- Net Weight: Approx. 9.0 g
Dimensions:
- Module Length: 45.0 mm
- Module Width: 20.0 mm
- Total Height: 15.0 mm (including transducer depth)
- Transducer Diameter: 16.0 mm
- Center-to-Center Transducer Spacing: 26.0 mm
Pinout and Wiring:
- VCC: Connect to regulated +5.0V DC power supply.
- TRIG (Trigger): Connect to microcontroller digital output pin (Send a 10 μs HIGH pulse to initiate measurement).
- ECHO (Echo): Connect to microcontroller digital input pin (Measure HIGH pulse duration in microseconds).
- OUT: Mode selection pin (Leave unconnected for standard 4-pin HC-SR04 compatible mode; connect to GND to enable single-pin shared Trigger/Echo mode on the TRIG pin).
- GND: Connect to circuit power ground (0V / GND).
Datasheet Reference:
- HY-SRF05 Precision Ultrasonic Distance Sensor Technical Datasheet, Timing Diagrams, and Arduino Distance Calculation Code.
Commonly Used in:
- Autonomous obstacle avoidance mobile robots, robotic vacuum cleaners, and self-balancing robots.
- Vehicle parking distance warning systems and garage docking proximity alarms.
- Non-contact liquid and bulk material level measurement in open cisterns and industrial bins.
- Smart interactive art installations, people counters, and automated sanitizing dispensers.
Applications:
- Obstacle Detection & Mapping: Empowering mobile robot chassis to sense approaching walls and compute dynamic path recalculation.
- Water Cistern Depth Telemetry: Measuring the acoustic distance from tank ceiling to water surface to calculate stored water percentage.
- Height Measurement Kiosks: Determining human height in automated wellness and fitness measurement stations.
- Intrusion Perimeter Alarms: Triggering electronic security alerts when an unauthorized object or person breaches a calibrated distance threshold.
Equivalent Models:
- HC-SR04 Ultrasonic Sensor: Standard 4-pin baseline model with 4.0-meter range.
- RCWL-1601 Ultrasonic Sensor: Modern 3.3V/5V compatible ultrasonic module with similar 4.5-meter range.
- JSN-SR04T Waterproof Ultrasonic Sensor: Sealed outdoor probe version designed for damp or exposed environments.
Package Includes:
- 1 × HY-SRF05 Precision Ultrasonic Distance Ranging Sensor Module






Reviews
No reviews yet. Be the first to share your experience!