Back to Category
Shop By Departments

u-blox NEO-8M High Precision GPS Module with Electronic Compass for Pixhawk

₹1,799.00

Out of stock ?

Out of stock

SKU: IFT00166-2 Category: Tags: , , Brand:

u-blox NEO-8M High Precision GPS Module with Electronic Compass for Pixhawk is an integrated navigational flight sensor unit featuring a high-sensitivity u-blox NEO-8M GNSS receiver and an internal HMC5883L/QMC5883L digital electronic compass. Housed in a round aerodynamic dome with internal RF shielding and an extra-large 35×35mm ceramic patch antenna, this unit connects directly to Pixhawk 2.4.8 and Pixhawk 4 flight controllers via dedicated 6-pin GPS and 4-pin I2C connectors.

Key Features:
  • Integrated Dual Sensor System: Combines concurrent multi-constellation GNSS positioning and a 3-axis digital magnetometer compass.
  • Engineered for Pixhawk Flight Controllers: Fitted with pre-crimped JST-GH / DF13 connectors for plug-and-play Pixhawk installation.
  • High-Gain 35mm Ceramic Patch Antenna: Massive antenna footprint ensures rapid multi-satellite lock even in challenging outdoor environments.
  • External Elevated Mast Mounting: Elevates the compass sensor above high-current drone ESCs and power cables to eliminate magnetic interference.
  • Full Multi-GNSS Tracking: Concurrently tracks GPS, GLONASS, BeiDou, and QZSS for centimeter-level relative position hold.
  • EMI Protective Ground Shielding: Internal aluminum ground plane shields sensitive RF circuitry from onboard 2.4GHz/5.8GHz transmitters.
Technical Specifications:
  • Operating Voltage: 5.0V DC (supplied via Pixhawk GPS port)
  • Operating Current: 60 mA to 80 mA
  • GNSS Engine: 72-channel u-blox M8 engine
  • Magnetometer IC: HMC5883L / QMC5883L 3-Axis Digital Compass
  • Compass Interface: I2C Serial Interface (Address 0x1E / 0x0D)
  • GPS Interface: UART Serial (Default 38400 bps / 9600 bps)
  • Position Accuracy: 2.0 meters CEP
  • Operating Temperature: -40°C to +85°C
Mechanical Specifications:
  • Enclosure Material: Impact-resistant injection-molded ABS shell
  • Cable Type: 6-Pin and 4-Pin shielded twisted silicone flight lead
  • Cable Length: Approximately 25 cm
  • Weight: Approximately 32 grams
Dimensions:
  • Dome Diameter: 54.0 mm
  • Dome Height: 15.0 mm
Pinout and Wiring:
  • GPS Connector (6-Pin): VCC (+5V), TX (GPS Out to Pixhawk RX), RX (GPS In from Pixhawk TX), GND, NC, NC.
  • I2C Compass Connector (4-Pin): VCC (+5V), SCL (I2C Clock), SDA (I2C Data), GND.
Datasheet Reference:
  • Datasheet Reference: Consult ArduPilot Pixhawk Wiring Guide, u-blox M8 Technical Data, and Honeywell HMC5883L Compass specifications.
Commonly Used in:
  • Pixhawk 2.4.8, Pixhawk 4, and Cube flight controller drones
  • Heavy-lift agricultural spraying multirotors and hexacopters
  • Autonomous surveying fixed-wing mapping UAVs
  • Unmanned surface vessels (USV) and robotic search rovers
Applications:
  • Autonomous GPS position hold, altitude hold, and loiter flight modes
  • Automated mission waypoint following and auto-landing
  • Fail-safe return-to-launch (RTL) navigation on RC signal loss
  • True magnetic heading estimation without motor magnetic deflection
Equivalent Models:
  • u-blox M8N GPS Module with Compass for Pixhawk
  • Holybro Micro M8N GPS Module
  • Radiolink M8N GPS Module with Compass
Package Includes:
  • 1 × u-blox NEO-8M High Precision GPS Module with Electronic Compass for Pixhawk
Weight 100 g

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “u-blox NEO-8M High Precision GPS Module with Electronic Compass for Pixhawk”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

u-blox NEO-8M High Precision GPS Module with Electronic Compass for Pixhawk

u-blox NEO-8M High Precision GPS Module with Electronic Compass for Pixhawk

₹1,799.00
Hi, How can I help you today?
Chat Assistant