US-016 Dual Range Analog Ultrasonic Ranging Module is an advanced analog-output ultrasonic distance measurement sensor engineered to deliver an analog voltage proportional to distance, eliminating the need for complex timing loops or microsecond-resolution interrupt coding. Operating from a regulated 5V DC supply, it emits 40 kHz acoustic sound bursts and processes the returning echo through an onboard micro-controller, translating target distance directly into a smooth linear analog output voltage (0 to 3.3V). Featuring an onboard jumper that switches between a 1-meter high-resolution range (ideal for close-proximity robotics) and a 3-meter extended range, it connects directly to any microcontroller ADC pin (Arduino, ESP32, STM32, Raspberry Pi) with simple, single-line analogRead routines.
Key Features:
- Direct Analog Voltage Output: Eliminates trigger pulses and echo timing code; output voltage varies linearly from 0V to 3.3V proportional to measured distance.
- Dual Selectable Ranges (1m / 3m): Onboard Range jumper pins allow instant hardware selection between a 1-meter high-sensitivity range (3.3 mV/mm) and a 3-meter extended range (1.1 mV/mm).
- Fast Measurement Cycle Time: Internal controller automatically handles ultrasonic acoustic pulsing and echo reception with updates every 50 ms.
- High Acoustic Accuracy: Delivers measurement accuracy up to 1 mm + 1% across its calibrated range, with a minimal blind spot of only 2 cm.
- Standard 4-Pin Header: Standard 2.54 mm header pins (VCC, Range, Out, GND) provide effortless connection to breadboards and expansion shields.
Technical Specifications:
- Operating Supply Voltage: 5.0 V DC ± 0.25 V
- Operating Current: 3.8 mA (Typical, ultra-low power consumption)
- Operating Acoustic Frequency: 40.0 kHz ± 1.0 kHz
- Measurement Distance Range: 2 cm to 300 cm (Range Pin Floating) / 2 cm to 100 cm (Range Pin Tied to VCC)
- Measurement Resolution: 1 mm
- Measurement Accuracy: 1 mm ± 1% of target distance
- Analog Output Voltage Range: 0.0 V to 3.3 V DC (Safe for 3.3V and 5V ADCs)
- Output Voltage Sensitivity (1m Mode): Approx. 3.3 mV per millimeter (0–1000 mm)
- Output Voltage Sensitivity (3m Mode): Approx. 1.1 mV per millimeter (0–3000 mm)
- Measuring Conical Angle: < 15 Degrees
- Operating Temperature Range: 0°C to +70°C
Mechanical Specifications:
- Board Substrate: Double-sided FR-4 glass-epoxy with gold-plated solder pads
- Acoustic Transducers: Dual 16 mm matched 40 kHz aluminum cylinder transducers (Transmitter ‘T’ and Receiver ‘R’)
- Pin Header: 4-pin male right-angle header with 2.54 mm pitch
- Net Weight: Approx. 9.5 g
Dimensions:
- Module Length: 45.0 mm
- Module Width: 20.0 mm
- Module Thickness: 15.0 mm (including transducer height)
- Transducer Diameter: 16.0 mm
- Center Distance Between Transducers: 26.0 mm
Pinout and Wiring:
- Pin 1 (VCC): Connect to regulated +5.0V DC power supply.
- Pin 2 (Range): Range selection pin (Leave floating or tied to GND for 3-meter range; tie to VCC for 1-meter high-resolution range).
- Pin 3 (Out): Analog voltage output (Connect directly to an analog ADC input pin on your microcontroller).
- Pin 4 (GND): Connect to circuit power ground (0V / GND).
Datasheet Reference:
- US-016 Dual-Range Analog Ultrasonic Ranging Module User Guide, Voltage-to-Distance Transfer Function, and Arduino ADC Example.
Commonly Used in:
- Obstacle avoidance robots and autonomous mobile robot (AMR) navigation platforms.
- Simple analog sensor meters, PLC distance input channels, and non-microcontroller analog comparator circuits.
- Liquid level monitoring in water tanks, cisterns, and storage hoppers.
- Classroom physics demonstrations illustrating non-contact acoustic time-of-flight principles.
Applications:
- Microcontroller-Free Proximity Trigger: Directly feeding the analog output voltage into an op-amp comparator (like LM393) to trigger alarms without code.
- Autonomous Robot Navigation: Providing rapid continuous distance data to ADC channels without consuming MCU interrupt processing overhead.
- Non-Contact Depth Gauge: Measuring water, grain, or pellet height from the top of an enclosed hopper.
- Parking Distance Assistant: Driving simple analog LED bar graphs (via LM3914) to visualize docking distance in real time.
Equivalent Models:
- HC-SR04 Ultrasonic Sensor: Standard digital pulse-echo sensor requiring software timing calculations.
- US-015 High-Precision Ultrasonic Sensor: Digital pulse version from the same family featuring 0.5 mm resolution.
- Sharp GP2Y0A21YK0F Optical Distance Sensor: Analog infrared triangulation distance sensor alternative (10–80 cm).
Package Includes:
- 1 × US-016 Dual Range Analog Ultrasonic Ranging Module

Reviews
No reviews yet. Be the first to share your experience!