Back to Category
Shop By Departments

16mm 40kHz Ultrasonic Transducer Transmitter and Receiver Pair

₹160.00

In stock ?

In stock

Category: Brand:

16mm 40kHz Ultrasonic Transducer Transmitter and Receiver Pair is a matched set of industrial-grade 40 kHz piezoelectric ultrasonic acoustic transducers comprising one dedicated acoustic transmitter (‘T’) and one high-sensitivity acoustic receiver (‘R’). Encased in sturdy 16 mm spun-aluminum cylindrical housings with protective wire mesh acoustic front grilles, these transducers resonate at the international standard 40 kHz acoustic center frequency. The transmitter utilizes high-efficiency lead zirconate titanate (PZT) ceramic elements to generate high acoustic sound pressure levels (≥ 115 dB SPL at 10V RMS drive), while the matched receiver delivers exceptional sensitivity (≥ -65 dB) for detecting faint returning echoes. Ideal for repairing HC-SR04 / HY-SRF05 sensor modules, designing custom sonar arrays, acoustic levitation experiments, and ultrasonic telemetry.

Key Features:
  • Matched Acoustic Pair: Factory-paired set includes one dedicated Ultrasonic Transmitter (marked ‘T’) and one matched Ultrasonic Receiver (marked ‘R’).
  • Industry-Standard 40kHz Frequency: Calibrated center resonant frequency of 40.0 kHz ± 1.0 kHz ensures maximum acoustic efficiency in air.
  • High Acoustic Sound Pressure & Sensitivity: Transmitter generates ≥ 115 dB SPL, while receiver provides ≥ -65 dB sensitivity for reliable echo reception over meters.
  • Rugged Aluminum Casing with Wire Mesh: Spun aluminum housings protect delicate internal piezoelectric crystals while acoustic mesh ensures high transmission efficiency.
  • Broad 50-Degree Conical Radiation Pattern: Conical acoustic beam pattern provides wide spatial coverage for area obstacle detection and sonar scanning.
Technical Specifications:
  • Center Resonant Frequency: 40.0 kHz ± 1.0 kHz
  • Transmitter Sound Pressure Level (T): ≥ 115 dB SPL (10V RMS drive at 30 cm, 40 kHz)
  • Receiver Sensitivity (R): ≥ -65 dB / V / μbar (0 dB = 1V/μbar at 40 kHz)
  • Nominal Impedance: Approx. 500 Ω (Transmitter) / 2000 Ω (Receiver)
  • Static Capacitance: 2000 pF ± 20% (at 1 kHz)
  • Maximum Continuous Drive Voltage (Transmitter): 20 V RMS (Peak pulse drive up to 100 Vp-p)
  • Directivity (-6dB Beam Angle): 50° to 60° conical angle
  • Housing Material: Spun aluminum casing with stainless steel wire mesh grille
  • Lead Pin Pitch: 10.0 mm between solder leads
  • Operating Temperature Range: -30°C to +85°C
Mechanical Specifications:
  • Transducer Casing: Cylindrical aluminum can with through-hole base header
  • Transducer Markings: Rear case stamped with ‘T’ (Transmitter) and ‘R’ (Receiver)
  • Terminal Pins: 2 × solderable copper-clad steel pins per transducer
  • Total Net Weight: Approx. 4.5 g (pair)
Dimensions:
  • Transducer Outer Diameter: 16.0 mm
  • Transducer Body Height: 12.0 mm
  • Lead Pin Length: 8.0 mm
  • Lead Pin Pitch: 10.0 mm
Pinout and Wiring:
  • Lead 1 (Signal / Positive): Connect to the 40 kHz AC excitation driver circuit (for Transmitter ‘T’) or pre-amplifier high-impedance input (for Receiver ‘R’).
  • Lead 2 (Ground / Outer Shell): Connect to analog circuit ground (0V / GND); internally connected to the outer aluminum shielding housing for EMI noise rejection.
  • Orientation: Maintain parallel alignment between transmitter and receiver faces for optimal pulse-echo reflection capture.
Datasheet Reference:
  • Open-Structure 16mm 40kHz Piezoelectric Ultrasonic Transducer Technical Datasheet, Impedance Curves, and Beam Directivity Polar Plots.
Commonly Used in:
  • Direct repair and refurbishment of damaged HC-SR04, HY-SRF05, and US-015 sensor modules.
  • Custom discrete transistor-based 40 kHz sonar systems and parking sensors.
  • Acoustic levitation experimental setups suspending droplets in standing sound waves.
  • Ultrasonic anemometers measuring wind velocity via acoustic phase-transit differentials.
Applications:
  • Sensor Board Repair: Desoldering dented or damaged transducers on existing ultrasonic boards and soldering in fresh matched components.
  • Custom Sonar Array Design: Building specialized multi-transducer beam-forming arrays for 3D spatial mapping.
  • Acoustic Standing Wave Levitation: Powering high-voltage dual-opposed 40 kHz transducers to trap Styrofoam beads or water droplets in nodal points.
  • Physics Laboratory Acoustic Experiments: Measuring the velocity of sound in various atmospheric gases (air, CO2, helium) via time-of-flight measurements.
Equivalent Models:
  • TCT40-16T / TCT40-16R Pair: Widely recognized commercial part number for 16mm 40kHz matched transducers.
  • Murata MA40S4S / MA40S4R: High-end Japanese matched ultrasonic transducer set sharing identical 16mm footprints.
  • Waterproof 16mm 40kHz Transducer: Solid-face sealed transducer variant for wet outdoor environments.
Package Includes:
  • 1 × 16mm 40kHz Ultrasonic Transducer Transmitter and Receiver Pair
  • 1 × 16mm 40kHz Ultrasonic Transmitter Transducer (Marked ‘T’)
  • 1 × 16mm 40kHz Ultrasonic Receiver Transducer (Marked ‘R’)
Weight 10 g

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “16mm 40kHz Ultrasonic Transducer Transmitter and Receiver Pair”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

16mm 40kHz Ultrasonic Transducer Transmitter and Receiver Pair

16mm 40kHz Ultrasonic Transducer Transmitter and Receiver Pair

₹160.00
Hi, How can I help you today?
Chat Assistant