Back to Category
Shop By Departments

ESP32 Wi-Fi & Bluetooth UNO D1 R32 4MB Flash Micro-USB Development Board

₹385.00

In stock ?

  • Development Board
  • Micro USB
  • WiFi
  • Bluetooth
  • Arduino Compatible

In stock

SKU: WIRELESS-3 Category: Tag: Brand:

ESP32 Wi-Fi & Bluetooth UNO D1 R32 4MB Flash Micro-USB Development Board is a 32-bit wireless development board that packages the Espressif ESP-WROOM-32 dual-core 240 MHz Wi-Fi and Bluetooth/BLE module into the classic Arduino UNO R3 mechanical footprint. Furthermore, it integrates 4MB of SPI Flash, a CH340 USB-to-UART converter with auto-reset bootloader circuitry, and a wide-input DC barrel jack step-down power supply. Consequently, makers can upgrade legacy Arduino UNO projects and enclosures to 240 MHz dual-core processing with built-in 2.4GHz Wi-Fi and Bluetooth 4.2/BLE connectivity.

Key Features:
  • Dual-Core 240 MHz Tensilica Xtensa LX6 CPU: Powered by the genuine Espressif ESP32-D0WDQ6 SoC inside a shielded ESP-WROOM-32 module with 520KB internal SRAM and 4MB SPI Flash.
  • Integrated 802.11b/g/n Wi-Fi & Dual-Mode Bluetooth: Supports 150 Mbps 2.4GHz Wi-Fi (Station/SoftAP) alongside Bluetooth v4.2 BR/EDR and Bluetooth Low Energy (BLE).
  • Standard Arduino UNO R3 Form Factor: Matches the 68.6mm × 53.4mm mounting holes and female header geometry of the Arduino UNO R3 for easy enclosure and 3.3V shield mounting.
  • Wide-Range DC Barrel Jack Input (5V–12V): Onboard buck/LDO power stage regulates external 5V–12V DC barrel jack supplies into stable 5V and 3.3V rails (up to 1A peak for Wi-Fi bursts).
  • Plug-and-Play Auto-Upload over Micro-USB: Onboard CH340G and dual-transistor DTR/RTS auto-reset circuit flash firmware automatically from Arduino IDE or ESP-IDF without holding down BOOT buttons.
Technical Specifications:
  • Wireless Module: Espressif ESP-WROOM-32 (ESP32-D0WDQ6 Dual-Core 32-Bit MCU @ Up to 240 MHz)
  • Memory: 520 KB On-Chip SRAM | 4 MB (32 Mbit) Onboard SPI NOR Flash
  • Wireless Standards: Wi-Fi 802.11 b/g/n (2.4 GHz) + Bluetooth 4.2 BR/EDR and BLE
  • GPIO Operating Logic Voltage: Strictly 3.3V DC (Not 5V Tolerant)
  • External Power Input: 5.0V to 12.0V DC via 5.5mm × 2.1mm Barrel Jack or 5.0V DC via Micro-USB Port
  • Analog Inputs (12-Bit SAR ADC): 6 Pins Mapped to the UNO A0–A5 Header Positions (`IO2, IO4, IO35, IO34, IO36, IO39`)
  • Peripherals: Capacitive Touch, 2 × 8-Bit DACs, I2C, SPI, UART, I2S, CAN 2.0, and 16-Channel LED PWM
Mechanical Specifications:
  • PCB Layout: Standard Arduino UNO R3 Footprint with RF Keep-Out Zone Under PCB Antenna
  • Connectors: Micro-USB Type-B Port, 5.5mm × 2.1mm DC Power Jack, Reset Tactile Button
  • Mounting Holes: 4 × 3.2mm (M3) Standard UNO Mounting Holes
Dimensions:
  • Length: 68.6 mm
  • Width: 53.4 mm
  • Height: 12.5 mm
  • Weight: ≈ 25 g
Pinout and Wiring:
  • UNO Analog Header (`A0–A5`): Mapped to ESP32 ADC pins `IO2 (A0), IO4 (A1), IO35 (A2), IO34 (A3), IO36/SVP (A4), IO39/SVN (A5)`; note that `IO34, IO35, IO36, IO39` are input-only pins.
  • UNO Digital Header: `IO3 (RX0), IO1 (TX0), IO26 (D2), IO25 (D3/DAC1), IO17 (D4), IO16 (D5), IO27 (D6), IO14 (D7), IO12 (D8), IO13 (D9), IO5 (D10/SS), IO23 (D11/MOSI), IO19 (D12/MISO), IO18 (D13/SCK)`.
  • Dedicated I2C Header: `IO21 (SDA)` and `IO22 (SCL)` at the top-left UNO R3 I2C header positions.
  • Engineering Precaution: Unlike a 5V ATmega328P Arduino UNO, all ESP32 D1 R32 GPIO and ADC pins operate strictly at 3.3V logic (0V–3.3V ADC range); therefore, verify that any stacked UNO shield uses 3.3V logic or add a voltage divider before connecting 5V sensor outputs.
Datasheet Reference:
Commonly Used in:
  • Cloud-Connected IoT Sensor Stations (ESPHome, Home Assistant, Blynk, AWS IoT)
  • Wireless CNC Shield V3 Grbl_ESP32 / FluidNC Laser & Router Controllers
  • Wi-Fi & Bluetooth Smart Home Relay & Display Panels
Applications:
  • Grbl_ESP32 / FluidNC CNC Control: Drops beneath an Arduino CNC Shield V3 to run browser-controlled wireless 3-axis stepper motion with microsecond pulse rates.
  • Dual-Core IoT Data Acquisition: Dedicates Core 0 to Wi-Fi/BLE/MQTT stacks while Core 1 executes deterministic real-time sensor polling and PID loops.
  • Legacy UNO Enclosure Upgrades: Fits directly into standard DIN-rail and acrylic Arduino UNO R3 cases.
Equivalent Models:
  • WeMos D1 R2 ESP8266 Wi-Fi UNO Board: Single-core 80MHz ESP8266 Wi-Fi-only board in the UNO footprint, whereas the D1 R32 upgrades to a dual-core 240MHz ESP32 with Bluetooth/BLE and 6 analog inputs.
  • ESP32 NodeMCU 30-Pin / 38-Pin DevKit V1: Narrow breadboard-friendly ESP32 module without the UNO R3 shield header layout or DC barrel jack.
  • Arduino UNO R4 WiFi: Official Renesas RA4M1 + ESP32-S3 board with 5V I/O logic at a higher price tier.
Package Includes:
  • 1 × ESP32 Wi-Fi & Bluetooth UNO D1 R32 4MB Flash Micro-USB Development Board
Weight 30 g
Dimensions 70 × 50 × 15 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “ESP32 Wi-Fi & Bluetooth UNO D1 R32 4MB Flash Micro-USB Development Board”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

ESP32 Wi-Fi & Bluetooth UNO D1 R32 4MB Flash Micro-USB Development Board

ESP32 Wi-Fi & Bluetooth UNO D1 R32 4MB Flash Micro-USB Development Board

₹385.00
Hi, How can I help you today?
Chat Assistant