Back to Category
Shop By Departments

Mega 2560 PRO MINI ATmega2560-16AU CH340G Embed USB Development Board

₹1,349.00

In stock ?

In stock

Category: Brand:

Mega 2560 PRO MINI ATmega2560-16AU CH340G Embed USB Development Board is an ultra-compact 55mm × 38mm embeddable version of the Arduino Mega 2560 R3, built around the genuine Microchip/Atmel ATmega2560-16AU 100-pin MCU and WCH CH340G USB-to-serial converter. Furthermore, it exposes all 54 digital I/O pins (15 PWM), 16 analog 10-bit inputs, and 4 hardware UART serial ports across high-density dual-row 2.54mm through-hole pads while reducing the PCB area by over 60% compared to a full-size Mega 2560. Therefore, OEM designers can solder it directly onto custom carrier motherboards or mount it inside compact enclosures where a 101mm Mega board cannot fit.

Key Features:
  • Full ATmega2560 Capability in 38×55mm Footprint: Retains 100% of the Arduino Mega 2560’s 256KB Flash, 8KB SRAM, 4KB EEPROM, 54 digital pins, 16 analog pins, and 4 UARTs in a palm-sized module.
  • Dual-Row 2.54mm Pin Header Layout: Arranges all GPIO, analog, communication, and power pins along clean 2-row peripheral banks for high-retention carrier-board mating.
  • High-Output Dual LDO Voltage Regulators: Onboard 5V and 3.3V linear regulators deliver up to 800mA peak current when fed with 6V–9V DC on the `VIN` pin.
  • Onboard Micro-USB & CH340G UART Interface: Programs directly from the Arduino IDE (select `Arduino Mega or Mega 2560`) over a standard Micro-USB cable.
  • Quartz-Stabilized 16 MHz Clock: Uses a precision 16.000 MHz crystal oscillator for low-drift baud-rate generation across all four hardware UARTs.
Technical Specifications:
  • Microcontroller: Microchip / Atmel ATmega2560-16AU (TQFP-100, 8-Bit AVR @ 16 MHz)
  • USB-to-TTL Bridge: WCH CH340G (12 MHz Crystal)
  • Operating Logic Voltage: 5.0V DC
  • External Input Voltage (`VIN` Pin): 6.0V to 9.0V DC Recommended (12V Peak at Light Load)
  • Max Regulator Output Current: ~800 mA on 5V Rail | ~800 mA on 3.3V Rail
  • Digital I/O Pins: 54 Pins (including 15 PWM Channels)
  • Analog Input Pins: 16 Channels (A0–A15, 10-Bit ADC)
  • Hardware Serial Ports: 4 × UARTs (`RX0/TX0, RX1/TX1, RX2/TX2, RX3/TX3`)
  • Memory: 256 KB Flash (8 KB Bootloader), 8 KB SRAM, 4 KB EEPROM
Mechanical Specifications:
  • PCB Construction: High-Density Matte Black FR-4 Double-Sided PCB with Gold/Tin Plated Pads and Clear Yellow/White Silkscreen
  • Header Format: Dual-Row 2.54mm Pitch Through-Hole Pin Arrays (Includes Male Pin Header Strips for Soldering)
  • USB Receptacle: Micro-USB Type-B Female Port
Dimensions:
  • Length: 54.0 mm to 55.0 mm
  • Width: 38.0 mm
  • Height: 4.8 mm (Unpinned)
  • Weight: ≈ 12 g (Board Only) / ≈ 22 g (With Male Headers)
Pinout and Wiring:
  • Power Pads (`VIN, GND, 5V, 3.3V`): Feed regulated 6V–9V DC into `VIN` and `GND`, or power directly via the Micro-USB port.
  • Analog Bank (`A0–A15`): Dual-row 2.54mm bank along one long edge with dedicated `AREF` and `GND` pins.
  • Digital & Communication Banks (`D0–D53`): Exposes `D20 (SDA) / D21 (SCL)`, `D50 (MISO) / D51 (MOSI) / D52 (SCK) / D53 (SS)`, and UARTs 0–3.
  • 6-Pin ICSP Header: Dedicated `MISO, 5V, SCK, MOSI, RST, GND` pads for ISP bootloader flashing.
  • Engineering Precaution: Because the compact 55×38mm PCB has less copper heatsink area than a full-size Mega 2560, keep the external `VIN` supply between 6.5V and 9.0V DC (avoid 12V–15V when drawing high current on the 5V rail) to prevent overheating the onboard linear regulator.
Datasheet Reference:
Commonly Used in:
  • Compact Flight Simulator Avionics Panels (MobiFlight, Air Manager, DCS-BIOS)
  • Custom Motherboards for Industrial PLC, Vending, and Agricultural Automation
  • Portable Robotics, Hexapod Walkers, and Multi-Channel Data Loggers
Applications:
  • Daughterboard Carrier Integration: Plugs into a custom 2-layer PCB socket just like an Arduino Nano or Pro Mini while delivering 54 digital I/O lines and 256KB Flash.
  • Space-Constrained Cockpit Instruments: Fits directly behind 3D-printed aircraft radio stacks, MCP autopilot panels, and FMC keypads.
  • Multi-Sensor Robotics Controller: Reads 16 analog sensors and 4 serial peripherals simultaneously inside tight robot chassis.
Equivalent Models:
  • Full-Size Arduino Mega 2560 R3 (CH340G): Identical electrical schematic in the larger 101.5×53.3mm shield-stackable footprint with a USB-B port and DC barrel jack.
  • Arduino Pro Mini (ATmega328P): Ultra-small 33×18mm 8-bit board when only 14 digital pins and 32KB Flash are needed.
  • STM32F407VET6 / Teensy 4.1: High-pin-count 32-bit ARM boards operating at 3.3V logic, whereas the Mega 2560 PRO MINI provides rugged 5V native logic.
Package Includes:
  • 1 × Mega 2560 PRO MINI ATmega2560-16AU CH340G Embed USB Development Board
Weight 14 g
Dimensions 54 × 38 × 10 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “Mega 2560 PRO MINI ATmega2560-16AU CH340G Embed USB Development Board”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

Mega 2560 PRO MINI ATmega2560-16AU CH340G Embed USB Development Board

Mega 2560 PRO MINI ATmega2560-16AU CH340G Embed USB Development Board

₹1,349.00
Hi, How can I help you today?
Chat Assistant