Back to Category
Shop By Departments

6S 15A 24V Li-Ion Lithium Battery BMS Protection Board

₹299.00

In stock ?

In stock

6S 15A 24V Li-Ion Lithium Battery BMS Protection Board is a 6-series (22.2V nominal / 25.2V full charge) Battery Management System (BMS) and PCM protection circuit designed for 6S 18650, 21700, and lithium-ion battery packs. Engineered with low-RDS(on) power MOSFETs on an aluminum-backed or heavy-copper thermal PCB, this board delivers 15A continuous discharge current (25A peak) while continuously monitoring every individual cell group for overcharge (4.28V), over-discharge (2.55V), overcurrent (30A), and load short circuits.

Key Features:
  • 6-Series (24V Nominal) Cell Management: Independently monitors all 6 series cell groups (B1 through B6) for precision voltage protection.
  • 15A Continuous / 25A Peak Current: High-efficiency N-channel MOSFET array handles 15A continuous load and charging current with low conduction loss.
  • Comprehensive 4-Stage Protection: Protects 6S lithium packs from overcharging, deep over-discharging, overcurrent surges, and accidental short circuits.
  • Fast 250μs Short-Circuit Cut-off: Instantaneously isolates the battery pack within 250 microseconds of a load short circuit.
  • Low Quiescent Self-Consumption: Draws less than 30μA in normal operation, preventing parasitic drainage during long-term pack storage.
Technical Specifications:
  • Series Cell Configuration: 6S (6 Series 3.7V Li-ion / LiPo Cells — 22.2V Nominal, 25.2V Charged)
  • Continuous Discharge Current: 15 A
  • Instantaneous Peak Discharge Current: 25 A
  • Charging Voltage: 25.2V to 25.5V DC (CC/CV Lithium Charger Required)
  • Maximum Charging Current: 15 A (Max)
  • Overcharge Detection / Release Voltage: 4.28V ± 0.05V / 4.08V ± 0.05V per cell
  • Over-Discharge Detection / Release Voltage: 2.55V ± 0.08V / 2.90V ± 0.10V per cell
  • Overcurrent Protection Threshold: 30 A ± 3 A (9ms delay; release by disconnecting load)
  • Short-Circuit Detection Delay: 250 μs
  • Main Circuit Internal Resistance: ≤ 20 mΩ
  • Operating Temperature Range: -30°C to +80°C
Mechanical Specifications:
  • PCB Construction: High-conductivity FR-4 PCB with tinned high-current copper busbars and heatsink plate
  • Terminations: Large solder pads for P+, P-, B-, B1, B2, B3, B4, B5, and B6 sense leads
  • Weight: Approximately 14 grams
Dimensions:
  • Length: 50.0 mm
  • Width: 32.0 mm
  • Height: 4.5 mm
Pinout and Wiring:
  • B-: Connect to the main Negative (-) terminal of Cell 1 (0V pack reference).
  • B1: Connect to the junction between Cell 1 (+) and Cell 2 (-) (3.7V).
  • B2: Connect to the junction between Cell 2 (+) and Cell 3 (-) (7.4V).
  • B3: Connect to the junction between Cell 3 (+) and Cell 4 (-) (11.1V).
  • B4: Connect to the junction between Cell 4 (+) and Cell 5 (-) (14.8V).
  • B5: Connect to the junction between Cell 5 (+) and Cell 6 (-) (18.5V).
  • B6 / B+: Connect to the main Positive (+) terminal of Cell 6 (25.2V full charge).
  • P+ / P-: Common Port Charge and Discharge Positive (P+) and Negative (P-) output terminals.
Datasheet Reference:
  • Refer to the 6S 24V 15A Li-Ion BMS Wiring Diagram and Multi-Cell Protection IC Application Manual.
Commonly Used in:
  • 24V electric bicycles, mobility scooters, and cordless garden power tools
  • 24V solar street light lithium battery banks and off-grid energy storage packs
  • 24V portable robotic rovers, AGVs, and DC motor drive battery packs
  • 24V backup power supplies for industrial PLCs, CCTV systems, and telecom equipment
Applications:
  • 6S 18650 / 21700 Pack Assembly: Building safe, protected 24V lithium-ion battery packs for high-drain equipment.
  • Lead-Acid to Lithium Replacement: Retrofitting 24V SLA battery enclosures with lightweight 6S lithium packs.
  • Over-Discharge Pack Safeguarding: Preventing irreversible cell degradation in high-load 24V DC tools.
Equivalent Models:
  • 6S 12A 24V BMS Protection Board: Slightly lower current (12A continuous) 6S lithium protection module.
  • 7S 25A 24V/29.4V BMS Board: 7-series BMS module for higher-voltage 24V nominal e-bike battery packs.
  • 4S 30A 14.8V BMS Protection Board: 4-series high-current BMS for 12V–16.8V lithium battery packs.
Package Includes:
  • 1 × 6S 15A 24V Li-Ion Lithium Battery BMS Protection Board
Weight 15 g
Dimensions 50 × 32 × 3 mm
INPUT VOLTAGE

24v

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “6S 15A 24V Li-Ion Lithium Battery BMS Protection Board”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

6S 15A 24V Li-Ion Lithium Battery BMS Protection Board

6S 15A 24V Li-Ion Lithium Battery BMS Protection Board

₹299.00
Hi, How can I help you today?
Chat Assistant