Back to Category
Shop By Departments

1A 5V 4.2V TP4056 Single Cell Lithium Battery Charging Module

₹30.00

In stock ?

In stock

1A 5V 4.2V TP4056 Single Cell Lithium Battery Charging Module is a compact standalone constant-current/constant-voltage (CC/CV) linear charger board for single-cell 3.7V (4.2V full charge) lithium-ion and lithium-polymer batteries. Built around the original TP4056 1A linear charge management IC with a Micro-USB 5V power receptacle, this 4-pad non-protected version is specifically designed for charging cells that already have their own internal protection circuit or for dedicated single-cell charging cradles. It automatically performs 100mA trickle pre-charging for deeply depleted cells (<2.9V), 1A fast charging, and 4.20V ±1.5% float termination.

Key Features:
  • Precision TP4056 CC/CV Algorithm: Delivers 1000mA constant-current charging followed by 4.20V constant-voltage saturation and automatic 100mA C/10 termination.
  • Automatic Recharge Cycle: Automatically restarts a new charge cycle if the connected battery voltage drops below 4.05V (~80%–90% capacity).
  • Deep-Discharge Trickle Recovery: Safely pre-conditions deeply discharged cells (<2.9V) at 100mA before engaging full 1A current.
  • Compact 4-Pad Layout: Simplified IN+, IN-, BAT+, and BAT- footprint ideal for tight enclosure spaces.
  • Dual LED Charge Indicators: Onboard Red LED indicates active charging; Green/Blue LED indicates full 4.2V charge completion.
Technical Specifications:
  • Charger Controller IC: NanJing TopPower TP4056 (SOP-8 with bottom heatsink pad)
  • Input Supply Voltage: 4.5V to 5.5V DC (5.0V USB Standard)
  • Charge Cut-off Voltage: 4.20V ± 1.5%
  • Default Charging Current: 1.0 A (Programmable from 50mA to 1000mA via 1.2kΩ RPROG resistor)
  • Pre-Charge Conditioning Threshold: < 2.9V @ 100mA
  • Auto-Recharge Threshold: 4.05V
  • Operating Temperature Range: -10°C to +85°C
Mechanical Specifications:
  • Input Connector: SMD Micro-USB Female Receptacle
  • PCB Material: FR-4 Double-Sided Fiberglass Board
  • Terminations: 4 through-hole solder pads (IN+, IN-, BAT+, BAT-)
  • Weight: Approximately 1.5 grams
Dimensions:
  • Length: 22.0 mm
  • Width: 17.0 mm
  • Height: 3.8 mm
Pinout and Wiring:
  • IN+ / +: 5V DC Positive Power Input pad (Parallel to Micro-USB port).
  • IN- / -: 5V DC Negative Ground Input pad.
  • BAT+ / B+: Connect to 3.7V Lithium Battery Positive (+) terminal.
  • BAT- / B-: Connect to 3.7V Lithium Battery Negative (-) terminal.
  • Important Note: Observe strict battery polarity (No reverse polarity protection). When charging batteries smaller than 1000mAh, replace the RPROG resistor to keep charge current ≤0.5C.
Datasheet Reference:
  • Refer to the NanJing TopPower TP4056 1A Standalone Linear Li-Ion Battery Charger IC Datasheet for RPROG current programming tables.
Commonly Used in:
  • Single-slot and multi-slot parallel 18650 battery charging cradles
  • Charging protected LiPo pouch batteries that already include an onboard PCM strip
  • DIY rechargeable LED torches, emergency lamps, and handheld cooling fans
  • Educational electronics labs and battery charging experiments
Applications:
  • 18650 & 21700 Cell Charging: Dedicated 5V USB charging for cylindrical lithium-ion cells.
  • Embedded Charger Retrofits: Adding Micro-USB charging to battery-operated consumer devices.
Equivalent Models:
  • TP4056 1A Protected Module (with DW01A): 6-pad version adding onboard over-discharge and short-circuit load protection.
  • TP5000 1A Switch-Mode Charger: High-efficiency buck charger supporting both 4.2V Li-ion and 3.6V LiFePO4 cells.
Package Includes:
  • 1 × 1A 5V 4.2V TP4056 Single Cell Lithium Battery Charging Module
Weight 1 g
Dimensions 15 × 12 × 5 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “1A 5V 4.2V TP4056 Single Cell Lithium Battery Charging Module”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

1A 5V 4.2V TP4056 Single Cell Lithium Battery Charging Module

1A 5V 4.2V TP4056 Single Cell Lithium Battery Charging Module

₹30.00
Hi, How can I help you today?
Chat Assistant