6-in-1 USB 3.7V LiPo Battery Multi-Charger Adapter is a compact USB-powered multi-channel parallel / independent linear charger splitter designed to charge up to 6 single-cell (1S 3.7V nominal / 4.2V full charge) micro drone and RC helicopter Lithium Polymer (LiPo) batteries simultaneously from any standard 5V USB port. Equipped with 6 standard micro LiPo battery output ports (such as Molex Picoblade 1.25mm / JST-DS 2.0mm) and individual per-port LED charge status indicators, it eliminates waiting between flights by topping off an entire fleet of micro quadcopter batteries at once.
Key Features:
- Simultaneous 6-Port Charging: Charges from 1 up to 6 single-cell 3.7V LiPo batteries at the same time from a single 5V USB source.
- Independent Channel Regulation: Each output port regulates its own charging cycle and automatically terminates at 4.20V when its battery is full.
- Individual LED Status Indicators: Dedicated status LEDs for each port indicate active charging and turn off (or switch color) upon full charge completion.
- Plug-and-Play 5V USB Input: Connects to any 5V 2A smartphone USB wall adapter, power bank, or laptop USB port.
- Lightweight Pocket Design: Compact housing fits easily inside drone field cases and RC transmitter bags.
Technical Specifications:
- Configuration: 6-Channel 1S LiPo USB Multi-Charger
- Input Voltage: 5.0V DC (1A to 2.4A USB Adapter Recommended)
- Output Voltage: 4.20V DC ± 1% per port
- Output Current: ~350mA to 500mA per channel
- Target Battery Chemistry: 1S 3.7V Lithium Polymer (LiPo) / Li-Ion Pouch Cells (150mAh to 800mAh)
- Operating Temperature Range: 0°C to +45°C
Mechanical Specifications:
- Housing Material: Durable ABS plastic enclosure / insulated PCB module
- Output Connectors: 6 × 2-Pin Micro LiPo Battery Sockets
- Input Interface: 5V USB Interface Cable
- Weight: Approximately 18 grams
Dimensions:
- Length: 50.0 mm
- Width: 35.0 mm
- Height: 13.0 mm
Pinout and Wiring:
- 5V USB Input: Plug into a 5V ≥2A USB wall charger or portable power bank.
- Battery Output Ports (1 to 6): Insert 1S 3.7V LiPo battery plugs observing correct keyed orientation (Red = Positive +, Black = Negative -).
Datasheet Reference:
- Refer to the 1S Multi-Channel USB LiPo Charger Splitter specification sheet for connector pitch and current derating details.
Commonly Used in:
- Micro indoor FPV quadcopters (Tiny Whoop, Syma, Hubsan, Eachine, Inductrix)
- 1S 3.7V RC micro helicopters, gliders, and miniature RC cars
- Small wearable electronics and multi-node IoT LiPo battery fleets
Applications:
- Fleet Battery Turnaround: Charging 6 flight packs simultaneously in 45–60 minutes between RC sessions.
- Portable Field Charging: Running off a 5V USB power bank at outdoor flying fields.
Equivalent Models:
- 4-in-1 USB 3.7V LiPo Multi-Charger: Alternative 4-port version of this multi-battery USB charger.
- Micro USB Single LiPo Charger with JST: Single-channel 100mA/500mA MCP73831 LiPo charger board.
Package Includes:
- 1 × 6-in-1 USB 3.7V LiPo Battery Multi-Charger Adapter

Reviews
No reviews yet. Be the first to share your experience!