Back to Category
Shop By Departments

CN3065 Mini Solar LiPo and Li-Ion Battery Charger Module

₹190.72

In stock ?

In stock

SKU: IFT00164-7 Category: Brand:

CN3065 Mini Solar LiPo and Li-Ion Battery Charger Module is an ultra-compact single-cell (3.7V/4.2V) solar lithium battery charger breakout board engineered around the Consonance CN3065 solar charge management IC. Designed specifically to harvest energy from miniature 4.4V to 6.0V solar panels or 5V USB inputs, the CN3065 incorporates an internal on-chip power MOSFET and adaptive input voltage regulation that prevents solar panel voltage collapse under partial shade. Equipped with dual 2-pin JST-PH 2.0mm receptacles and a Micro/Mini USB port, it allows simultaneous solar charging and system load powering.

Key Features:
  • Adaptive Solar Input Regulation: Automatically throttles charge current when solar irradiance drops, keeping the solar panel near its optimal 4.5V–5.5V operating point.
  • Plug-and-Play JST-PH 2.0mm Sockets: Pre-soldered 2-pin JST connectors for Battery and Load outputs, plus solar/USB input interfaces.
  • 500mA Constant-Current / 4.2V Constant-Voltage: Factory set to 500mA max charging current with precision 4.20V ±1% termination and automatic recharge.
  • No External Blocking Diode Required: Internal PMOS architecture prevents reverse battery discharge back into the solar panel at night.
  • Dual Status LEDs: Onboard Red (Charging) and Green (Charge Complete) SMD indicator LEDs.
Technical Specifications:
  • Charger IC: Consonance CN3065 Single-Cell Solar Lithium Charge Controller
  • Solar / DC Input Voltage: 4.4V to 6.0V DC (Nominal 5V / 5.5V / 6V Mini Solar Panel or 5V USB)
  • Target Battery Chemistry: Single-Cell 3.7V LiPo / Li-Ion (4.20V ± 1% Full Charge)
  • Default Maximum Charge Current: 500 mA (Adjustable via ISET resistor)
  • Pre-Charge Trickle Current: 10% of fast-charge current (for cells <2.9V)
  • Sleep Mode Reverse Leakage Current: < 3 μA
  • Operating Temperature Range: -40°C to +85°C
Mechanical Specifications:
  • Connectors: 2 × 2-Pin JST-PH 2.0mm Sockets (BATT and LOAD/SOLAR) + USB 5V Input Port
  • PCB Material: FR-4 Double-Sided Fiberglass Board
  • Through-Hole Pads: Breakout solder holes for Solar IN, Battery, and Load Out
  • Weight: Approximately 4.5 grams
Dimensions:
  • Length: 40.0 mm
  • Width: 20.0 mm
  • Height: 7.5 mm
Pinout and Wiring:
  • SOLAR IN (+ / -): Connect a 4.5V to 6.0V miniature solar panel (Do not exceed 6.5V open-circuit voltage).
  • USB Port: Alternative 5V DC USB charging input.
  • BATT JST Socket (+ / -): Connect a 3.7V LiPo or 18650 battery pack (Recommended capacity ≥500mAh).
  • LOAD / OUT JST Socket (+ / -): Parallel output terminal for powering 3.3V/3.7V microcontroller loads.
Datasheet Reference:
  • Refer to the Consonance Electronics CN3065 Complete Single-Cell Li-Ion Battery Charger IC for Solar Power Application Datasheet.
Commonly Used in:
  • Autonomous solar-powered Arduino, ESP8266, ESP32, and LoRa weather stations
  • Compact outdoor environmental sensor nodes powered by 5V/5.5V/6V epoxy solar panels
  • Wearable solar chargers and educational renewable energy electronics kits
  • Wireless garden soil-moisture monitors and remote agricultural telemetry
Applications:
  • Small Solar Panel Energy Harvesting: Directly pairing with 5V–6V (50mA to 500mA) mini polycrystalline solar cells.
  • Backup USB/Solar Hybrid Charging: Charging 3.7V LiPo packs outdoors via sun or indoors via 5V USB.
Equivalent Models:
  • SD05CRMA Mini Solar Charger: High-efficiency switch-mode solar charger supporting up to 1A output.
  • CN3791 MPPT Solar Charger Module: Switch-mode 2A solar MPPT charger for larger 6V/9V/12V solar panels.
  • TP4056 1A Charger Module: Standard 5V USB linear charger without adaptive solar input tracking.
Package Includes:
  • 1 × CN3065 Mini Solar LiPo and Li-Ion Battery Charger Module
Weight 5 g
Dimensions 40 × 20 × 8 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “CN3065 Mini Solar LiPo and Li-Ion Battery Charger Module”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

CN3065 Mini Solar LiPo and Li-Ion Battery Charger Module

CN3065 Mini Solar LiPo and Li-Ion Battery Charger Module

₹190.72
Hi, How can I help you today?
Chat Assistant