Back to Category
Shop By Departments

12V 10A Battery Undervoltage Management Load Cut-Off Protection Switch Module

₹211.20

In stock ?

In stock

12V 10A Battery Undervoltage Management Load Cut-Off Protection Switch Module is an automatic low-voltage disconnect (LVD) relay switch board designed to protect 12V storage batteries from deep-discharge damage. Factory preset to cut off resistive loads when battery voltage drops below ~10.5V (with an onboard multi-turn potentiometer for custom threshold tuning), it automatically restores power once battery voltage rises back above the recovery level while drawing less than 10mA in standby.

Key Features:
  • Automatic Low-Voltage Cut-Off & Recovery: Disconnects the 12V load automatically when battery voltage drops below the threshold (~10.5V default) and reconnects the load automatically once the battery is recharged.
  • Adjustable Undervoltage Potentiometer: Multi-turn trimpot lets you fine-tune the cut-off threshold (turn clockwise to raise the cut-off voltage, counterclockwise to lower it).
  • 10A Onboard Relay Switching: Heavy-duty 12V 10A SPDT mechanical relay switches 12V DC lamps, routers, fans, and resistive loads cleanly.
  • Low <10mA Standby Consumption: Efficient voltage-comparator driver draws less than 10mA when monitoring the battery in cut-off mode.
  • Dual Status Indicator LEDs: Separate Power and Undervoltage/Load LEDs provide instant visual feedback on battery protection status.
Technical Specifications:
  • Nominal Supply / Battery Voltage: 12V DC
  • Default Undervoltage Cut-Off Threshold: ~10.5V DC (Adjustable via Onboard Potentiometer)
  • Maximum Output Load Current: 10A DC (Resistive)
  • Quiescent / Standby Current: < 10 mA Max
  • Operating Temperature Range: -25°C to +85°C
  • Operating Humidity: 5% to 95% RH (Non-Condensing)
Mechanical Specifications:
  • PCB Material: FR-4 Double-Sided Fiberglass Board
  • Terminals: 3-Pin Screw Terminal Block (Battery IN, Common GND, Load OUT)
Dimensions:
  • Length: ~50 mm
  • Width: ~30 mm
  • Height: ~18 mm
  • Weight: ~20 g
Pinout and Wiring:
  • Battery Input (+ / -): Connect to the 12V battery positive and negative terminals.
  • Load Output (+ / -): Connect to the 12V resistive load.
  • Anti-Bounce Capacitor Tip: Because unloaded battery voltage rebounds slightly as soon as a heavy load disconnects, if the relay cycles ON/OFF near the threshold, connect an electrolytic capacitor (>25V, e.g., 470µF–1000µF) across the sense pins to smooth recovery hysteresis.
Datasheet Reference:
  • Circuit Architecture: Precision TL431 / Comparator Voltage Monitor + 12V 10A Power Relay
Commonly Used in:
  • 12V Solar Off-Grid Lighting & Battery Load Shedding
  • 12V SLA / AGM / Gel Battery Deep-Discharge Prevention
  • Automotive Auxiliary Fridge, Dashcam, and Lamp Cut-Offs
  • 12V Wi-Fi Router & CCTV Backup Battery Packs
Applications:
  • Automatically shuts off 12V LED strips or DC fans before a 12V 7Ah/12Ah battery discharges below 10.5V, then turns them back on once solar panels recharge the battery the next morning.
  • Protects unattended 12V field telemetry stations from ruining expensive AGM batteries during cloudy weeks.
  • Provides simple screw-terminal installation without microcontroller programming.
Equivalent Models:
  • 12V 10A Battery Undervoltage Cut-Off and Automatic Charging Protection Module: Dual-potentiometer 12V undervoltage/charger control board with independent turn-on and turn-off potentiometers.
  • 12V 10A Lead-Acid Battery Over-Discharge Protection Cut-Off Module: Manual push-button latch 12V 10A low-voltage cut-off module with zero standby drain.
Package Includes:
  • 1 × 12V 10A Battery Undervoltage Management Load Cut-Off Protection Switch Module
Weight 20 g
Dimensions 39 × 29 × 20 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “12V 10A Battery Undervoltage Management Load Cut-Off Protection Switch Module”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

12V 10A Battery Undervoltage Management Load Cut-Off Protection Switch Module

12V 10A Battery Undervoltage Management Load Cut-Off Protection Switch Module

₹211.20
Hi, How can I help you today?
Chat Assistant