6S 22.2V 25.2V 4.2V Li-ion 18650 Battery Passive Equalizer Balancer Board is an auxiliary 6-series (6S 22.2V nominal / 25.2V full charge) cell voltage equalization module designed to add 4.20V per-cell top-balancing to 6-cell 18650, 21700, and LiPo battery packs. Equipped with 6 independent 4.20V voltage-detection and 66mA bleed-resistor channels (`B1` through `B6`), it works in parallel with any non-balanced 6S BMS to ensure all 6 series cell groups reach 100% full charge uniformly.
Key Features:
- 6-Series (22.2V / 25.2V) Cell Equalization: Independently monitors and balances all 6 series cell groups in 22.2V/25.2V lithium-ion and LiPo packs.
- 66mA Shunt Bleed Current at 4.20V/Cell: Activates a $6262 Ω SMD bleed path (66mA) across any cell that reaches 4.20V first, holding it steady while the remaining cells finish charging.
- Ideal Companion for Non-Balanced 6S BMS Boards: Connects directly across the `B-` through `B+` sense leads of a 6S 12A/15A/25A BMS (`PID 23179`).
- Zero Idle Consumption Below 4.18V: Draws virtually zero current during discharging or storage so it never drains your 6S battery pack.
- Compact Lightweight Strip PCB: Easily embeds under heat-shrink wrap on 6S 18650 and LiPo battery packs.
Technical Specifications:
- Supported Pack Configuration: 6S (6 Series 3.7V Li-ion / 18650 / 21700 / LiPo Cells — 22.2V Nominal / 25.2V Full)
- Single-Cell Balance Trigger Voltage: 4.20V DC per cell
- Single-Cell Balance Current: 66 mA per channel
- Recommended BMS Cut-Off Pairing: Pair with a 6S BMS whose overcharge cutoff is ≥ 4.25V/cell
- Recommended Cell Matching: Internal resistance difference ≤ 5 mΩ, voltage within 0.03V, capacity within 50 mAh
Mechanical Specifications:
- PCB Material: FR-4 Fiberglass Strip PCB with 6 × Precision Shunt Channels
- Terminals: 7 × Tinned Solder Pads (`B-`, `B1+`, `B2+`, `B3+`, `B4+`, `B5+`, `B6+`)
Dimensions:
- Length: ~42 mm
- Width: ~26 mm
- Thickness: ~2.5 mm
- Weight: ~5 g
Pinout and Wiring:
- B- (0V): Connect to Cell 1 Negative (Pack Negative).
- B1+ to B5+: Connect sequentially to the positive terminals of Cell 1 (`3.7V`), Cell 2 (`7.4V`), Cell 3 (`11.1V`), Cell 4 (`14.8V`), and Cell 5 (`18.5V`).
- B6+ (22.2V/25.2V): Connect to Cell 6 Positive (Pack Positive).
- Important Note: Always pair with a 6S BMS (`PID 23179` 6S 12A BMS) for over-discharge and short-circuit protection.
Datasheet Reference:
- Circuit Architecture: 6 × Independent 4.20V Voltage Detectors + MOSFET Switches + $6262 Ω SMD Bleed Resistors (66mA)
Commonly Used in:
- 6S (22.2V / 25.2V) 18650 Robotics, Rover, and E-Scooter Packs
- 6S Agricultural Sprayer Drone & Heavy UAV LiPo Packs
- 24V Solar Street Light & Backup UPS Lithium Packs
- Upgrading Non-Balanced 6S BMS Assemblies
Applications:
- Wires in parallel with our `6S 22.2V 25.2V 12A 18650 Lithium Battery BMS Protection Board` (`PID 23179`) to provide complete 6-cell protection plus 66mA cell balancing.
- Prevents cell divergence over repeated charge/discharge cycles in 22.2V battery packs.
- Provides simple, reliable top-balancing when charging 6S packs from a 2-wire 25.2V CC/CV adapter.
Equivalent Models:
- 5S 18.5V 21V 18650 Li-ion Battery Passive Equalizer Balancer Board: 5-series (18.5V/21V) 66mA passive balancer board (`PID 3361`).
- 7S 25.9V 29.4V 4.2V Li-ion 18650 Battery Passive Equalizer Balancer Board: 7-series (25.9V/29.4V) 66mA passive balancer board (`PID 3363`).
Package Includes:
- 1 × 6S 22.2V 25.2V 4.2V Li-ion 18650 Battery Passive Equalizer Balancer Board

Reviews
No reviews yet. Be the first to share your experience!