Roll over image to zoom in
TP5000 4.2V/3.6V 1A LITHIUM BATTERY CHARGING MODULE
₹70.00
You save
Happy New Year
The TP5000 Battery Charging Module supports both Lithium Ion and Lithium Phosphate batteries, and works with 4.2V as well as 3.6V batteries. The default charging current on this module is 1A but can be adjusted by changing the value of the current shunt sensing resistor. It includes overcurrent, over-discharge, and overcurrent protection. The RED LED indicates that the battery is charging, while the GREEN LED indicates that the battery is fully charged.
Key Features of TP5000 Battery Charging Module:
-
- Wide Input Voltage Range: DC 4.5V – 9V (Recommended Input Voltage should not exceed 7V).
- Adjustable Output Voltage: 4.2V (default) for Lithium Ion Battery and 3.6V for Lithium Phosphate Battery.
- Adjustable Output Current: Default is 1A, but can be adjusted by changing the current shunt resistor.
- LED Indicators: RED indicates charging ON, GREEN indicates charging complete.
- Integrated Protections: Overcurrent, over-discharge, and overcurrent protection.
- Integrated Switching Regulator: Reduces heat production compared to linear regulators.
- Heat Dissipation: Blank pad on the bottom side to fix a heat sink if output current exceeds 1A.
Technical Specifications of TP5000 Battery Charging Module:
-
- Input Voltage Range: DC 4.5V – 9V (Recommended Input Voltage should not exceed 7V).
- Output Voltage: 4.2V/3.6V (changeable).
- Default Output Voltage: 4.2V (for Lithium Ion Battery).
- Output Current: 1A (default, changeable).
- LED Indicator: RED indicates charging ON, GREEN indicates charging complete.
- F Solder Pad: Connect to charge 3.6V Lithium Phosphate Battery; leave unconnected for 4.2V Lithium Ion Battery.
- Adjustable Output Current:
- 1A (default, with 0.1 Ohms R100 resistor soldered below SANYA label).
- 1.5A (solder 0.2 Ohms resistor below R100 resistor).
- 2A (solder 0.1 Ohms resistor below R100 resistor).
- 0.5A (remove R100 resistor and solder 0.2 Ohms resistor).
- Heat Dissipation: Additional heat sink required when output current is more than 1A.
Mechanical Specifications of TP5000 Battery Charging Module:
-
- Package Type: Surface-mount (SMD).
- Material: PCB with integrated components.
- Pins: Input (VCC, GND), Output (BAT+, BAT-), F Solder Pad.
- Weight: Lightweight design suitable for compact applications.
Schematic Diagram, Connection, Wiring, and Pinout of TP5000 Battery Charging Module:
-
- Pin Configuration: VCC (Power), GND (Ground), BAT+ (Battery Positive), BAT- (Battery Negative), F Solder Pad.
- Connection: Connect VCC and GND to power supply, BAT+ and BAT- to the battery terminals.
- Wiring: Ensure correct electrical connections and follow recommended wiring practices for safe operation.
Equivalent of TP5000 Battery Charging Module:
-
- TP4056 Module: Similar functionality for single-cell Lithium Ion batteries with linear charging.
- TP5100 Module: Supports dual-cell charging with higher current capabilities.
Keywords for TP5000 Battery Charging Module:
-
- TP5000 Battery Charger
- Adjustable Current Charger
- Lithium Battery Charging Module
- LiFePO4 Charger
- 1A Battery Charger
Package Includes:
-
- 1 x TP5000 4.2V/3.6V 1A Lithium Battery Charging Module
Additional information
Weight | 2.8 g |
---|---|
Dimensions | 32 × 15 × 5 mm |
Reviews
There are no reviews yet.