Back to Category
Shop By Departments

TB6560 3A Stepper Motor Driver Board

₹585.00

In stock ?

In stock

Category: Brand:

TB6560 3A Stepper Motor Driver Board is a high-power single-axis CNC stepper motor driver module engineered around the Toshiba TB6560AHQ PWM chopper-type bipolar stepping motor driver IC. Designed for CNC routers, laser engravers, pick-and-place machines, and heavy automated linear slides, this board delivers up to 3.0A continuous (3.5A peak) output current across a wide 10V to 35V DC supply rail. Equipped with high-speed 6N137 optical isolators, onboard DIP switches for current and microstepping selection, an aluminum heatsink, and automatic half-current idle reduction, it guarantees cool, noise-immune, and stable operation.

Key Features:
  • Toshiba TB6560AHQ Silicon: High-power monolithic BiCD process driver IC delivering up to 3A rated (3.5A peak) phase current.
  • High-Speed Optical Isolation: 6N137 optocouplers isolate step, direction, and enable signals, shielding host controllers from electrical spikes.
  • Configurable Microstepping: Onboard 6-position DIP switch selects 1, 1/2, 1/8, and 1/16 microstepping resolutions.
  • Adjustable Current Decay Modes: Selectable 0%, 25%, 50%, and 100% current decay settings to eliminate motor hum and resonance.
  • Automatic Idle Current Reduction: Reduces motor holding current by 50% when stationary, minimizing motor heating during pauses.
  • Heavy Extruded Aluminum Heatsink: Large thermal heatsink ensures efficient passive cooling under continuous machining loads.
Technical Specifications:
  • Operating Supply Voltage: 10.0V to 35.0V DC (24V DC recommended)
  • Rated Continuous Current: 3.0 A per phase
  • Peak Surge Output Current: 3.5 A per phase
  • Microstepping Modes: 1 (Full), 1/2 (Half), 1/8 (Micro), 1/16 (Micro)
  • Current Settings: 100%, 75%, 50%, 20% of maximum rated current
  • Input Signal Voltage: 3.3V to 5.0V DC standard TTL logic
  • Chopping Frequency: Up to 100 kHz
  • Built-In Protections: Thermal shutdown (TSD), undervoltage lockout (UVLO), and overcurrent detection
Mechanical Specifications:
  • Enclosure / Cooling: Black anodized heavy-duty aluminum extrusion heatsink base
  • Terminal Blocks: Pluggable industrial barrier screw terminal blocks
  • Configuration Interface: 6-pole precision mini DIP switch
  • Mounting Holes: 4 × 3.5mm perimeter chassis mounting holes
Dimensions:
  • Length: 75.0 mm
  • Width: 50.0 mm
  • Height: 35.0 mm
  • Weight: Approximately 85 g
Pinout and Wiring:
  • 24V (+): Positive DC power supply terminal (10V-35V DC).
  • GND (-): Power supply negative / common ground terminal.
  • A+ / A-: Stepper motor Phase A coil connection terminals.
  • B+ / B-: Stepper motor Phase B coil connection terminals.
  • CLK+ / CLK- (PUL): Optoisolated step pulse signal input.
  • CW+ / CW- (DIR): Optoisolated directional control signal input.
  • EN+ / EN- (ENA): Optoisolated driver enable/disable input.
Datasheet Reference:
Commonly Used in:
  • CNC Milling & Routing Machines: Driving NEMA 17 and NEMA 23 stepper motors on X, Y, and Z axes.
  • Laser Cutters & Engravers: High-speed optical carriage actuation without step-loss.
  • Industrial Automation Slides: Precision ball screw and timing belt positioning gantries.
Applications:
  • NEMA 17 / NEMA 23 Stepper Driving: Smooth motion control for 2-phase 4-wire and 8-wire hybrid stepper motors.
  • Mach3 & LinuxCNC Breakout Interfacing: Direct connection to parallel port breakout boards and USB motion cards.
  • Heavy-Duty 3D Printing: Large-format industrial FDM printer axis actuation.
Equivalent Models:
  • TB6600 4A Stepper Driver: Upgraded successor supporting higher voltage (up to 42V DC), 4.0A peak current, and 1/32 microstepping.
  • DM542 / DM556 Digital Stepper Driver: DSP-based digital microstepping driver offering anti-resonance algorithms and ultra-smooth low-speed motion.
  • DRV8825 Stepper Driver Module: Compact plug-in module delivering up to 2.2A with 1/32 microstepping for 3D printer controller boards.
Package Includes:
  • 1 × TB6560 3A Stepper Motor Driver Board
Weight 100 g
Dimensions 75 × 50 × 35 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “TB6560 3A Stepper Motor Driver Board”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

TB6560 3A Stepper Motor Driver Board

TB6560 3A Stepper Motor Driver Board

₹585.00
Hi, How can I help you today?
Chat Assistant