Mini USB Host Shield 2.0 MAX3421E ADK SPI Module for Arduino Pro Mini / Nano is an ultra-compact USB 2.0 Full-Speed/Low-Speed Host controller board built around the Analog Devices / Maxim MAX3421EEHJ peripheral/host controller IC. Furthermore, designed to match the exact 24-pin footprint of the 3.3V Arduino Pro Mini (and wireable to any Arduino Nano, UNO, ESP32, or RP2040 over SPI), it carries a full-size USB Type-A female host receptacle. Consequently, using the renowned `USB_Host_Shield_2.0` library, your microcontroller can host USB mice, keyboards, barcode scanners, PS4/PS5/Xbox controllers, Bluetooth dongles, MIDI keyboards, and USB-to-serial converters.
Key Features:
- Genuine MAX3421E USB 2.0 Host/Peripheral IC: Handles all low-level USB differential signaling, SOF frame generation, CRC checking, and endpoint retries in dedicated silicon over SPI.
- Direct 3.3V Arduino Pro Mini Stackable Footprint: Aligns pin-for-pin with the 3.3V/8MHz Arduino Pro Mini while remaining compact enough (38mm × 18mm) to wire to any 3.3V MCU over 5 SPI lines.
- Standard Full-Size USB Type-A Host Port: Accepts USB keyboards, gaming mice, USB hubs, Bluetooth 4.0 CSR dongles, and USB barcode readers directly without OTG adapter cables.
- 100% Compatible with `USB_Host_Shield_2.0` Library: Supported by Circuits@Home / Oleg Mazurov’s open-source library covering HID, Mass Storage, CDC-ACM, MIDI, and PS3/PS4/Xbox/Switch controllers.
- High-Speed 26 MHz SPI Host Interface: Communicates with the host microcontroller via standard 4-wire SPI (`SCK, MOSI, MISO, SS`) plus `INT` and `RST`.
Technical Specifications:
- USB Controller IC: Maxim / Analog Devices MAX3421EEHJ+ (TQFP-32 Package)
- USB Compliance: USB 2.0 Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) Host or Peripheral
- Host MCU Interface: 4-Wire SPI (Up to 26 MHz Clock) + Active-Low `INT` + Active-Low `RST`
- Onboard Crystal: 12.000 MHz Quartz Crystal Oscillator
- Logic & IC Supply Voltage (`VCC`): Strictly 3.3V DC (For MAX3421E Core and SPI Logic)
- USB VBUS Supply: 5.0V DC Required on USB `VBUS` Pad to Power Connected 5V USB Devices (Cuttable Trace Jumper Separating 3.3V `VCC` and 5V `VBUS`)
- USB Port: Standard USB Type-A Female Receptacle
Mechanical Specifications:
- PCB Substrate: Ultra-Compact Blue Double-Sided FR-4 Fiberglass PCB
- Pinout Format: 2 × 12-Pin 2.54mm Pitch Through-Hole Rows Matching Arduino Pro Mini
Dimensions:
- Length: 38.0 mm
- Width: 18.0 mm
- Height: 11.5 mm (At USB-A Receptacle)
- Weight: ≈ 5.5 g
Pinout and Wiring:
- SPI & Control Pin Mapping (Pro Mini Layout): `SS = D10, MOSI = D11, MISO = D12, SCK = D13, INT = D9, RST = RST`.
- Power Supply (`VCC` = 3.3V, `VBUS` = 5V): The MAX3421E chip on the Mini USB Host Shield has no onboard 5V-to-3.3V regulator or level shifter; supply **3.3V DC** to the board’s `VCC` pin.
- 5V USB VBUS Modification (Important Pro Tip): By default from the factory, the USB-A port’s `VBUS` pin is tied to the 3.3V `VCC` rail; for USB devices that strictly require 5.0V on VBUS, cut the tiny solder jumper trace next to the `VBUS` pin above the `RAW` position and solder a wire from `5V / RAW` directly to the `VBUS` pad!
- Engineering Precaution: Never connect 5V logic signals from a 5V Arduino UNO or Nano directly to the Mini USB Host Shield’s `VCC` or SPI pins without a 3.3V regulator and logic-level shifter, as the MAX3421E `VCC / VL` absolute maximum rating is 4.0V.
Datasheet Reference:
Commonly Used in:
- USB Mouse & Keyboard HID Passthrough / Filtering Bridges (with Leonardo / Pro Micro / ESP32-S3)
- USB MIDI Synthesizer Hosts (Converting USB-Only MIDI Keyboards to 5-Pin DIN MIDI)
- Wireless PS4/PS5/Xbox Gamepad Receivers for Robotics (with CSR Bluetooth 4.0 Dongle)
Applications:
- Standalone USB-MIDI to 5-Pin MIDI Converter: Plugs a modern USB-only MIDI controller keyboard into the USB-A port and outputs hardware 31250-baud MIDI via UART.
- USB Barcode Scanner & Keypad Reader: Reads industrial USB HID barcode scanners directly into an Arduino Pro Mini, ESP32, or STM32 without a PC.
- Robot Gamepad Teleoperation: Pairs with a Bluetooth dongle or wired Xbox/PlayStation controller to drive mobile robot motors.
Equivalent Models:
- Full-Size Arduino UNO USB Host Shield 2.0: Includes onboard 5V-to-3.3V LDO regulators and 74AHC125 level shifters for direct plug-and-play stacking on a 5V Arduino UNO R3.
- CH559 USB Host to UART Module: Dedicated dual-port USB HID host chip with serial UART output.
- RP2040-USB / Raspberry Pi Pico (PIO-USB): Emulates a USB 1.1 Host in software using RP2040 PIO state machines.
Package Includes:
- 1 × Mini USB Host Shield 2.0 MAX3421E ADK SPI Module for Arduino Pro Mini / Nano

Reviews
No reviews yet. Be the first to share your experience!