Back to Category
Shop By Departments

3D Printer CNC Shield V4 Expansion Board For Arduino

₹203.52

In stock ?

In stock

SKU: SHIELD-1-17 Category: Brand:

3D Printer CNC Shield V4 Expansion Board For Arduino is a versatile multi-axis motion control shield specifically engineered to seat an Arduino Nano and drive 3 independent stepper motors. Designed for mini CNC engraving machines, desktop laser cutters, and custom 3D printer builds running GRBL firmware, it features 3 standard stepper driver sockets supporting A4988, DRV8825, and TMC2208 carrier boards with onboard microstepping jumpers.

Key Features:
  • Arduino Nano Compatibility: Female header sockets allow direct plug-in mounting of an Arduino Nano V3.0 board.
  • 3-Axis Stepper Control: 3 independent stepper motor sockets controlling X, Y, and Z axes simultaneously.
  • Modular Driver Sockets: Compatible with A4988, DRV8825, TMC2208, and TMC2209 Pololu-format stepper driver modules.
  • Adjustable Microstepping: Onboard jumper blocks beneath each driver socket for configuring microstepping from full-step to 1/32 microstep.
  • Endstop Limit Headers: Dedicated 2-pin headers for connecting minimum and maximum limit switches on all axes.
  • Spindle and Emergency Control: Breakout pins for spindle enable, spindle direction, coolant control, and emergency abort/hold buttons.
Technical Specifications:
  • Host Controller: Arduino Nano V3.0 (ATmega328P)
  • Motor Supply Voltage (VMOT): 7.5V to 12V DC via screw terminal block (ensure driver rating matches power supply)
  • Logic Supply Voltage: 5V DC supplied from host Arduino Nano
  • Axis Channels: 3 axes (X, Y, Z) with 4-pin male header connectors per motor
  • Driver Sockets: 3x 16-pin Pololu-format driver sockets with heatsink clearance
  • Firmware Support: GRBL 0.8, GRBL 0.9, and GRBL 1.1 compatible
  • Protection: Onboard bulk electrolytic filter capacitors for suppressing voltage spikes
Mechanical Specifications:
  • Form Factor: Compact multi-axis CNC controller board for Arduino Nano
  • Board Material: Double-sided FR4 PCB with red protective solder mask
  • Mounting Holes: 4 corner M3 mounting holes for secure enclosure installation
  • Motor Header Pitch: 2.54mm (0.1 in) standard 4-pin header spacing
  • Weight: Approximately 30 g
Dimensions:
  • Overall Length: 72.0 mm
  • Overall Width: 59.0 mm
  • Overall Height: 15.0 mm
Pinout and Wiring:
  • DC Power Terminal: 2-pin screw terminal block for motor power input (7.5V–12V DC)
  • X-Axis Control: Step pin D5, Direction pin D2
  • Y-Axis Control: Step pin D6, Direction pin D3
  • Z-Axis Control: Step pin D7, Direction pin D4
  • Stepper Enable: Pin D8 (shared enable control line for all 3 driver sockets)
  • Limit Switch Headers: X-Limit (D9), Y-Limit (D10), Z-Limit (D11) with GND
  • Spindle Control: Spindle Enable on D12, Spindle Direction on D13
  • Microstepping Jumpers: MS1, MS2, and MS3 header pairs under each stepper driver socket
Datasheet Reference:
  • Refer to the CNC Shield V4 schematic diagram and GRBL Nano pin assignment table for driver voltage adjustment, potentiometer tuning, and wiring instructions.
Commonly Used in:
  • Miniature desktop CNC routers and PCB isolation milling machines
  • Diode laser engravers and cutting systems powered by Arduino Nano
  • EggBot, SphereBot, and polar drawing machines
  • Compact 3-axis motion stages and linear actuator positioning rigs
Applications:
  • Mini CNC engraving machine control
  • Laser engraver motion controller
  • DIY 2D and 3D plotting robots
  • Automated syringe pump and liquid dispensing mechanism
  • Linear positioning stage automation
Equivalent Models:
  • Arduino CNC Shield V3.0 (UNO form factor 4-axis version)
  • Makerbase MKS DLC Motion Control Board
  • Keyestudio CNC Shield V4 for Nano
  • RAMPS 1.4 Controller Shield
Package Includes:
  • 1 × 3D Printer CNC Shield V4 Expansion Board For Arduino
Weight 50 g
Dimensions 75 × 60 × 15 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “3D Printer CNC Shield V4 Expansion Board For Arduino”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

3D Printer CNC Shield V4 Expansion Board For Arduino

3D Printer CNC Shield V4 Expansion Board For Arduino

₹203.52
Hi, How can I help you today?
Chat Assistant