12V 30A Dual-Channel H-Bridge Motor Driver Module is a heavy-duty dual-channel power MOSFET motor driver board engineered for coreless motors, high-speed DC brushed motors, and high-current robotics actuators. Utilizing high-efficiency N-channel power MOSFETs with ultra-low internal resistance (RDS(on)) and dedicated hardware dead-time control, this module minimizes switching losses and completely prevents destructive shoot-through currents. Supporting up to 30A continuous current per channel across an operating range of 5V to 15V DC, it accommodates high-frequency PWM speed control up to 200 kHz for responsive, whisper-quiet motor operation.
Key Features:
- Dual High-Current MOSFET H-Bridges: Independent bidirectional forward, reverse, and braking control for two DC motors up to 30A continuous per channel.
- Hardware Dead-Time Generator: Built-in hardware dead-time protection prevents upper and lower MOSFET bridge shoot-through during direction reversals.
- Ultra-High PWM Frequency: Operates at PWM switching frequencies up to 200 kHz, ideal for low-inductance coreless motors and sensitive robotics.
- Low Internal Resistance: High-performance MOSFET array ensures minimal voltage drop and superior thermal efficiency under continuous stall loads.
- Optoisolated Logic Inputs: High-speed optical isolation shields host microcontrollers from high-current inductive voltage spikes.
Technical Specifications:
- Motor Operating Voltage: 5.0V to 15.0V DC (12V DC nominal)
- Continuous Drive Current: 30.0 A per channel (with proper heat dissipation)
- Peak Surge Output Current: Up to 50.0 A per channel
- Logic Control Input Voltage: 3.3V to 5.0V DC TTL compatible
- Maximum PWM Frequency: Up to 200 kHz
- MOSFET Type: Ultra-low RDS(on) N-Channel Power MOSFETs
- Operating Ambient Temperature: -20°C to +85°C
Mechanical Specifications:
- Substrate: 4-layer heavy copper FR4 PCB with top and bottom thermal ground planes
- Power & Motor Terminals: High-current bolt-down copper terminal blocks
- Control Interface: 2.54mm pitch male header strip
- Mounting Holes: 4 × M3 mounting holes located at perimeter corners
Dimensions:
- Length: 68.0 mm
- Width: 48.0 mm
- Height: 18.0 mm
- Weight: Approximately 55 g
Pinout and Wiring:
- VCC / +12V: Main motor power supply input terminal (5V-15V DC).
- GND: High-current DC ground terminal.
- M1A / M1B: High-current output terminals for Motor 1.
- M2A / M2B: High-current output terminals for Motor 2.
- IN1 / IN2: Directional logic inputs for Motor 1.
- IN3 / IN4: Directional logic inputs for Motor 2.
- PWM1 / PWM2: High-speed PWM speed modulation inputs for Motors 1 & 2.
- 5V / GND: Logic supply input from host controller.
Datasheet Reference:
Commonly Used in:
- Coreless Motor Actuation: Drones, high-speed winches, and low-inductance miniature coreless motors.
- Heavy Robotic Combat Platforms: High-amperage drivetrain control for battlebots and rovers.
- Electric Water Pumps & Blowers: High-efficiency variable speed control for automotive and fluid pumping systems.
Applications:
- High-Torque DC Brushed Motor Drive: Smooth, continuous speed regulation and instant active dynamic braking.
- High-Speed Robotics Drivetrains: Direct connection to high-torque 550, 775, and 895 series brushed DC motors.
- Precision Electric Actuators: Linear ram positioning with dead-time protected rapid directional reversal.
Equivalent Models:
- BTS7960 43A High-Power Motor Driver: Infineon-based alternative handling higher operating voltages up to 27V DC and 43A continuous current.
- VNH2SP30 30A Monster Motor Shield: STMicroelectronics integrated bridge module handling up to 14A continuous (30A peak) at 16V DC.
- XY-MC10 10A PWM DC Motor Driver: Compact 10A alternative with integrated optocouplers for mid-power DC motors.
Package Includes:
- 1 × 12V 30A Dual-Channel H-Bridge Motor Driver Module

Reviews
No reviews yet. Be the first to share your experience!