6V 1.3Ah Rechargeable SMF VRLA Lead-Acid Battery is a Sealed Maintenance-Free (SMF) Valve-Regulated Lead-Acid (VRLA / AGM) rechargeable battery delivering a nominal 6.0V DC output and 1.3 Ah (1300mAh) capacity. Constructed with an Absorbed Glass Mat (AGM) electrolyte system sealed inside a high-impact, leak-proof ABS resin case, it operates in any orientation without acid spills or water refilling and is widely used in 6V emergency exit signs, retail digital weighing scales, children’s ride-on toys, and 6V robotics chassis.
Key Features:
- Sealed Spill-Proof AGM Construction: Immobilized electrolyte in glass-fiber separators ensures 100% maintenance-free, leak-proof operation in vertical or horizontal mounting positions.
- Stable 6.0V 1.3 Ah (1300mAh) Output: Delivers dependable constant-voltage power with high surge current capability for motors, relays, and high-brightness LED arrays.
- Low Self-Discharge (<5% per Month): Holds charge for up to 6 months in room-temperature storage (25°C) when fully charged prior to storage.
- Simple Constant-Voltage Charging: Recharges easily from a standard 7.2V – 7.5V constant-voltage / current-limited DC supply or solar charge controller without complex multi-cell balancing.
- Rugged Impact-Resistant ABS Shell: Thick-walled ABS housing resists vibration and mechanical shock in mobile robotics and portable field equipment.
Technical Specifications:
- Battery Chemistry: Valve-Regulated Lead-Acid (VRLA / SMF / AGM)
- Nominal Voltage: 6.0V DC
- Rated Capacity (20-Hour Rate): 1.3 Ah (1300mAh)
- Cyclic Charging Voltage: 7.2V – 7.5V DC
- Standby / Float Charging Voltage: 6.75V – 6.90V DC
- Recommended Maximum Charging Current: 300mA – 390mA
- Self-Discharge Rate: < 5% per month at 25°C
- Operating Temperature Range: -15°C to +50°C
Mechanical Specifications:
- Case Material: High-Impact Flame-Retardant ABS Resin
- Terminal Type: F1 (4.75mm) Faston Spade / Solder Tab Terminals
- Ventilation: Self-Resealing Low-Pressure Safety Relief Valve
Dimensions:
- Length: 97 mm
- Width: 24 mm
- Height: 52 mm
- Weight: ~290 g
Pinout and Wiring:
- Red Marked Terminal (+): Positive 6.0V DC battery output.
- Black Marked Terminal (-): Negative 0V DC ground terminal.
- Maintenance Tip: Charge the battery for 4–6 hours before first use and always recharge promptly after use; never leave a lead-acid battery stored in a fully discharged state, as sulfation will permanently reduce capacity.
Datasheet Reference:
- Cell Architecture: 2.0V-per-Cell Series Absorbed Glass Mat (AGM) Lead-Acid Monoblock
Commonly Used in:
- Emergency LED Lanterns, Torch Lights, and Solar Lamps
- Electronic Weighing Scales & Retail Cash Registers
- Wired & Wireless Robotics Competition Chassis
- Security Alarm Panels, Access Control, and UPS Backup
Applications:
- Specifically designed for 6V emergency exit signs, retail digital weighing scales, children’s ride-on toys, and 6V robotics chassis.
- Provides a rugged, forgiving rechargeable power source for student robotics and solar energy experiments.
- Drops directly into commercial emergency lights, weighing scales, and backup enclosures as an OEM replacement battery.
Equivalent Models:
- 4V / 6V / 12V SMF Lead-Acid Series: Choose 4V (0.5Ah/1Ah/2Ah), 6V (1.3Ah), or 12V (1.3Ah) to match your system voltage.
- DMEGC INR18650-26E 3.7V 2600mAh Li-Ion Rechargeable Battery: Lightweight lithium-ion alternative when lower weight is required.
Package Includes:
- 1 × 6V 1.3Ah Rechargeable SMF VRLA Lead-Acid Battery

Reviews
No reviews yet. Be the first to share your experience!