3000mAh 3.7V 18650 Li-Ion Rechargeable Battery is a cylindrical 18mm × 65mm rechargeable lithium-ion cell delivering a nominal voltage of 3.7V DC (4.2V full charge) and a rated capacity of 3000 mAh (11.1 Wh). Offering high energy density, zero memory effect, and 500+ charge-discharge cycles, it is designed for maximum-runtime single-cell and multi-cell power banks, high-lumen LED torches, e-bike packs, and long-endurance mobile robots.
Key Features:
- 3000 mAh Energy Storage (11.1 Wh): Provides reliable 3.7V DC power with more than 3× the voltage of a standard 1.2V NiMH AA cell.
- Standard 18650 Cylindrical Format (18 × 65mm): Fits all standard 1×, 2×, 3×, and 4× 18650 spring battery holders, DIY power bank cases, and 18650 cell spacers.
- 500+ Recharge Cycle Lifespan: Engineered for repeatable CC/CV charging up to 4.20V with low self-discharge during storage.
- High Discharge Capability: Supports up to 6.0A–15.0A continuous discharge current for driving DC gear motors, Wi-Fi transceivers, and LED arrays.
- Compatible with TP4056 & BMS Boards: Pairs seamlessly with 1A TP4056 charger modules and 1S–6S 18650 BMS protection boards.
Technical Specifications:
- Cell Type: 18650 Cylindrical Lithium-Ion Rechargeable Cell
- Nominal Voltage: 3.7V DC
- Full Charge Voltage: 4.20V ± 0.05V (CC/CV)
- Discharge Cutoff Voltage: 2.75V to 3.0V DC
- Rated Capacity: 3000 mAh (11.1 Wh)
- Recommended Charge Current: 1.5A (0.5C) / 3.0A Max
- Max Continuous Discharge Current: 6.0A–15.0A
- Operating Temperature: Charge: 0°C to +45°C | Discharge: -20°C to +60°C
Mechanical Specifications:
- Case Material: Nickel-Plated Steel Cylindrical Can with PVC Insulation Wrap
- Terminal Style: Standard 18650 Flat-Top Cylindrical Terminals
Dimensions:
- Diameter: 18.2 mm ± 0.2 mm
- Length: 65.0 mm ± 0.3 mm
- Weight: ~47 g
Pinout and Wiring:
- Positive Terminal (+): Top cap end (marked + on sleeve, with circumferential crimp groove).
- Negative Terminal (-): Flat bottom metal base can.
- Safety Note: Always use with a lithium battery charger (4.2V CC/CV) or BMS protection circuit; never short-circuit terminals or discharge below 2.75V.
Datasheet Reference:
- Cell Architecture: Cylindrical 18650 Lithium-Ion Intercalation Cell (3.7V Nominal / 4.2V Max)
Commonly Used in:
- 2WD / 4WD Arduino & L298N Smart Robot Car Kits
- DIY 5V USB Power Banks and 18650 Charger Enclosures
- Solar-Powered IoT Nodes and Garden Lanterns
- Rechargeable LED Torches, Portable Fans, and Bluetooth Speakers
Applications:
- Specifically suited for maximum-runtime single-cell and multi-cell power banks, high-lumen LED torches, e-bike packs, and long-endurance mobile robots.
- Can be wired in series (2S 7.4V, 3S 11.1V, 4S 14.8V) inside 18650 battery holders to power motor drivers, or in parallel (1S2P, 1S4P) for 5V power banks.
- Replaces disposable 9V or AA alkaline batteries with a rechargeable high-current lithium power source.
Equivalent Models:
- DMEGC INR18650-26E 3.7V 2600mAh Li-Ion Rechargeable Battery: Industrial 2600mAh 3C-rated 18650 cell.
- 3.7V 1200mAh Lithium Polymer Li-Po Rechargeable Battery: Flat-pouch LiPo alternative when a thin rectangular profile is required.
Package Includes:
- 1 × 3000mAh 3.7V 18650 Li-Ion Rechargeable Battery

Reviews
No reviews yet. Be the first to share your experience!