DMEGC INR18650-26E 3.7V 2600mAh Li-Ion Rechargeable Battery is a genuine industrial-grade cylindrical 18650 lithium-ion cell manufactured by Hengdian Group DMEGC Magnetics. Featuring a nominal capacity of 2600mAh (3.6V/3.7V nominal, 4.2V full charge), low internal resistance (≤35mΩ), and a continuous 3C (7.8A) discharge capability, it is engineered for multi-cell EV/e-bike battery packs, solar storage banks, robotics power packs, and high-drain portable instruments.
Key Features:
- True 2600mAh Industrial Capacity: Delivers 2600mAh nominal capacity (2550mAh minimum) at a 0.2C discharge rate with high cell-to-cell consistency for series/parallel pack building.
- 3C Continuous / 5C Peak Discharge Rating: Supports up to 7.8A continuous discharge and 13A pulse discharge without excessive voltage sag or thermal rise.
- Long Cycle Life (≥800 Cycles): Retains ≥70%–80% capacity after 500–800 full charge/discharge cycles under standard 0.5C/1C operating conditions.
- Low Internal Impedance (≤35mΩ): Minimizes $I^2R$ heat generation during high-current motor starts and fast charging.
- Flat-Top Cylindrical 18650 Format: Standard 18.3mm × 65.0mm unprotected flat-top cell ready for nickel-strip spot welding or spring-loaded 18650 battery holders.
Technical Specifications:
- Manufacturer / Model: DMEGC / INR18650-26E
- Cell Chemistry: Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 / INR)
- Nominal Voltage: 3.6V / 3.7V DC
- Full Charge Cutoff Voltage: 4.20V ± 0.05V (CC/CV)
- Discharge Cutoff Voltage: 2.75V
- Nominal Capacity: 2600 mAh
- Standard Charge Current: 0.5C (1300mA) | Max Rapid Charge: 1C (2600mA)
- Max Continuous Discharge Current: 3C (7.8A)
- Internal Resistance (AC 1kHz): ≤ 35 mΩ
- Operating Temperature: Charge: 0°C to +45°C | Discharge: -20°C to +60°C
Mechanical Specifications:
- Form Factor: Standard 18650 Cylindrical Cell
- Terminal Style: Flat-Top Unprotected (Use with an external BMS or TP4056 protected charger)
- Outer Wrap: Heat-Shrink PVC Insulation Sleeve
Dimensions:
- Diameter: 18.3 mm ± 0.2 mm
- Length: 65.0 mm ± 0.2 mm
- Weight: ~46 g
Pinout and Wiring:
- Positive Terminal (+): Top flat button cap with vent ring groove.
- Negative Terminal (-): Flat bottom nickel-plated steel base can.
- Assembly Precaution: Never solder directly to 18650 cell terminals for more than 2 seconds, or use a spot welder with 0.15mm nickel strips and barley-paper insulator rings on the positive end.
Datasheet Reference:
- Manufacturer Specification: DMEGC INR18650-26E 3.6V 2600mAh Lithium-Ion Cell Technical Specification
Commonly Used in:
- Custom 3S/4S/7S/10S E-Bike, Scooter, and Robotics Battery Packs
- DIY High-Capacity USB Power Banks and UPS Backup Units
- Solar Street Light & Off-Grid IoT Energy Storage
- High-Lumen LED Flashlights and Portable Test Equipment
Applications:
- Spot-welds into 3S (11.1V), 4S (14.8V), or 6S (22.2V) battery packs paired with a matching BMS board for mobile robots and AGVs.
- Drops directly into 1×, 2×, 3×, or 4× 18650 battery holders and DIY power bank enclosures.
- Provides dependable energy storage for solar-charged weather stations, GSM/LoRa nodes, and emergency lanterns.
Equivalent Models:
- 3000mAh 3.7V 18650 Li-Ion Rechargeable Battery: Higher-capacity 3000mAh 18650 cell for maximum runtime.
- 2200mAh 3.7V 18650 Li-Ion Rechargeable Battery: Standard-capacity 2200mAh 18650 cell for general-purpose projects.
Package Includes:
- 1 × DMEGC INR18650-26E 3.7V 2600mAh Li-Ion Rechargeable Battery



Reviews
No reviews yet. Be the first to share your experience!