4S 14.8V 16.8V 18650 Li-ion Battery Passive Equalizer Balancer Board is an auxiliary 4-series (4S 14.8V nominal / 16.8V full charge) cell voltage equalization module designed to add 4.20V per-cell charge balancing to 4S lithium-ion battery packs whose primary BMS lacks built-in balancing. Whenever any individual cell in a 4S pack reaches 4.20V during charging, that channel’s precision voltage detector switches on a 66mA SMD bleed resistor to bypass charging current around the full cell until the remaining cells catch up to 4.20V.
Key Features:
- Adds 4-Channel Balancing to Non-Balanced 4S BMS Packs: Works in parallel with any 4S BMS protection board to ensure all 4 series cells reach 4.20V uniformly during top-charging.
- Precision 4.20V Per-Cell Trigger: Independently monitors all four cell groups (`B1`–`B4`) and activates balancing only when a cell reaches 4.20V.
- 66mA Shunt Bleed Current per Cell: Safely shunts 66mA (`4.2V / 62Ω`) across any cell that reaches full charge early so the main BMS does not trip on single-cell overvoltage before the rest of the pack is full.
- Zero Standby Drain Below 4.18V: Draws virtually 0µA during normal battery discharging or shelf storage.
- Ultra-Compact Strip PCB: Measures just ~26mm × 23mm to fit easily inside 4S 18650 battery packs and power tool housings.
Technical Specifications:
- Supported Pack Configuration: 4S (4 Series 3.7V Li-ion / 18650 / 21700 / LiPo Cells — 14.8V Nominal / 16.8V Full)
- Single-Cell Balance Voltage: 4.20V DC per cell
- Single-Cell Balance Current: 66 mA per channel
- Recommended BMS Cut-Off Pairing: Use with a 4S BMS whose overcharge cutoff is ≥ 4.25V/cell
- Recommended Cell Matching: Internal resistance difference ≤ 5 mΩ, voltage within 0.03V, capacity within 50 mAh
Mechanical Specifications:
- PCB Material: FR-4 Fiberglass PCB with 4 × Shunt Resistor Channels
- Terminals: 5 × Tinned Solder Pads (`B-`, `B1+`, `B2+`, `B3+`, `B4+`)
Dimensions:
- Length: ~26 mm to 30 mm
- Width: ~23 mm
- Thickness: ~2.5 mm
- Weight: ~3.5 g
Pinout and Wiring:
- B- (0V): Connect to Cell 1 Negative (Pack Negative).
- B1+ (3.7V): Connect between Cell 1+ and Cell 2-.
- B2+ (7.4V): Connect between Cell 2+ and Cell 3-.
- B3+ (11.1V): Connect between Cell 3+ and Cell 4-.
- B4+ (14.8V/16.8V): Connect to Cell 4 Positive (Pack Positive).
- Important Note: This is an auxiliary charge equalizer only—always use it together with a 4S BMS protection board for over-discharge and short-circuit protection!
Datasheet Reference:
- Circuit Architecture: 4 × Independent 4.20V Voltage Detectors + MOSFET Switches + $6262 Ω SMD Bleed Resistors (66mA)
Commonly Used in:
- 14.8V / 16.8V 4S 18650 Cordless Drill & Screwdriver Packs
- 4S1P / 4S2P 18650 Solar Lamps, Rovers, and Portable Power Packs
- 4S LiPo Battery Pack Maintenance
- Upgrading Non-Balanced 4S BMS Modules
Applications:
- Wires in parallel with the cell sense leads of a non-balanced 4S BMS to prevent progressive cell voltage drift over time.
- Restores full capacity to 16.8V 4S battery packs that cut off prematurely during charging due to one high cell.
- Provides a low-cost, featherweight passive balancing solution for 4S1P and 4S2P 18650 packs.
Equivalent Models:
- 4S 1.2A Lithium Battery Active Inductive Equalizer Balancer Module: High-current 1.2A inductive active equalizer for large 4S packs (`PID 48295`).
- 5S 18.5V 21V 18650 Li-ion Battery Passive Equalizer Balancer Board: 5-series (18.5V/21V) 66mA passive balancer board (`PID 3361`).
Package Includes:
- 1 × 4S 14.8V 16.8V 18650 Li-ion Battery Passive Equalizer Balancer Board

Reviews
No reviews yet. Be the first to share your experience!