5V 1-Channel Relay Module with Optocoupler Isolation High and Low Level Trigger is a versatile microcontroller-compatible switching board designed to safely control high-voltage and high-current AC or DC loads. Equipped with an onboard Songle 5V sugar cube relay, optocoupler isolation barrier, flyback freewheeling diode protection, and a selectable High/Low level trigger jumper, it provides clean galvanic isolation between sensitive microcontrollers (Arduino, ESP32, Raspberry Pi) and heavy electrical appliances up to 250V AC / 10A.
Key Features:
- Galvanic Optocoupler Isolation: Onboard PC817 optocoupler isolates microcontroller GPIO lines from inductive switching transients.
- High & Low Level Trigger Selectable: Onboard 3-pin jumper allows effortless selection between Active-High and Active-Low trigger modes.
- Heavy-Duty Switching Capacity: High-grade Songle relay contacts switch loads up to 10A at 250V AC or 10A at 30V DC.
- Dual Visual Status LEDs: Independent LEDs indicate Power (Green) and Relay Actuation Status (Red).
- Form C SPDT Relay Contacts: Provides Normally Open (NO), Common (COM), and Normally Closed (NC) screw terminal connections.
- Fault-Tolerant Design: Relay remains in un-energized safe state if microcontroller control lines become disconnected or float.
Technical Specifications:
- Coil Operating Voltage: 5.0V DC (supports 4.5V to 5.5V DC)
- Trigger Current: 5 mA typical per channel (compatible with direct MCU GPIO)
- Maximum Switching Voltage: 250V AC / 30V DC
- Maximum Switching Current: 10A (Resistive load)
- Isolation Type: PC817 Phototransistor Optocoupler Isolation
- Contact Resistance: Less than 100 mΩ
- Mechanical Life: Over 10,000,000 operations
- Electrical Life: Over 100,000 operations under rated load
- Operating Temperature: -30°C to +85°C
Mechanical Specifications:
- PCB Structure: Double-sided through-hole FR-4 circuit board
- Terminal Block: 3-Pin 5.08mm pitch high-current screw terminal block
- Header Type: 4-Pin 2.54mm pitch male header row (DC+, DC-, IN, Jumper)
- Mounting: 4 × M3 corner mounting holes
- Weight: Approximately 16 grams
Dimensions:
- Length: 50.0 mm
- Width: 26.0 mm
- Height: 18.5 mm
Pinout and Wiring:
- DC+: 5V DC Main Power Supply Input
- DC-: System Ground Reference (0V)
- IN: Relay Control Signal Input (Active High or Low selectable via jumper)
- NO: Normally Open Load Contact
- COM: Common Switch Terminal (connects to Live AC or DC Positive Supply)
- NC: Normally Closed Load Contact
Datasheet Reference:
- Datasheet Reference: Consult Songle SRD-05VDC-SL-C Relay Datasheet and Sharp PC817 Optocoupler specifications.
Commonly Used in:
- Home automation smart lighting and ceiling fan controllers
- Arduino and ESP8266 IoT web-controlled power sockets
- Industrial PLC output expansion and solenoid valve actuators
- Automatic greenhouse irrigation water pump switches
Applications:
- Controlling 230V mains lighting fixtures from low-voltage microcontrollers
- Switching high-current DC linear actuators and cooling fans
- Automated power cycling for telecommunications equipment
- Security alarm strobe and siren activation
Equivalent Models:
- 1-Channel 12V Relay Module
- 5V Solid State Relay (SSR) Module
- Songle SRD-05VDC Relay Breakout
Package Includes:
- 1 × 5V 1-Channel Relay Module with Optocoupler Isolation High and Low Level Trigger

Reviews
No reviews yet. Be the first to share your experience!