5V 1-Channel Relay Module Low-Level Trigger is a 1-channel optocoupler-isolated relay control board using Songle SRD-05VDC-SL-C sugar cube relays. Each channel lets a 3.3V or 5V microcontroller GPIO (Arduino, ESP32, Raspberry Pi, PLC) safely switch an independent AC or DC load up to 10A at 250V AC, with a PC817 optocoupler and flyback diode protecting the logic side from inductive spikes.
Key Features:
- 1 Independent Channels: Each relay provides its own NO, COM and NC screw terminals for separate loads.
- Optocoupler Isolation: PC817 optocouplers separate the microcontroller inputs from the relay coil circuit.
- Low-Level Trigger: A channel energises when its IN pin is pulled low (0V), the standard drive for these boards.
- Separate JD-VCC Supply Option: Removing the VCC/JD-VCC jumper allows the relay coils to run from an independent supply for full isolation.
- Status LEDs: Power LED plus one indicator LED per channel shows relay state.
- Flyback Protection: Freewheeling diode across every coil suppresses back-EMF.
Technical Specifications:
- Coil Voltage: 5V DC
- Coil Current: Approx. 72 mA per energised channel
- Input Trigger Current: 2 mA to 5 mA per channel
- Trigger Logic: Active low
- Contact Rating: 10A 250V AC / 10A 30V DC (resistive)
- Contact Form: 1 × SPDT (1 Form C per channel)
- Isolation: PC817 optocoupler per channel
- Operating Temperature: -25°C to +70°C
Mechanical Specifications:
- PCB: FR-4 double-sided board with milled isolation slots under relay contacts
- Load Terminals: 1 × 3-pin 5.08 mm screw terminal blocks
- Control Header: 3-pin 2.54 mm male header (GND, IN1–IN1, VCC) plus 3-pin JD-VCC jumper header
- Mounting: 4 × M3 mounting holes
Dimensions:
- Length: 50 mm
- Width: 26 mm
- Height: 19 mm
Pinout and Wiring:
- GND: Logic ground
- IN1–IN1: Channel control inputs (pull low to energise)
- VCC: Logic supply for optocoupler LEDs (3.3V–5V)
- JD-VCC: Relay coil supply (5V); bridged to VCC by jumper when sharing one supply
- NO / COM / NC: Normally open, common and normally closed contacts for each channel
Datasheet Reference:
- Datasheet Reference: Songle SRD-05VDC-SL-C relay datasheet and Sharp PC817 optocoupler datasheet.
Commonly Used in:
- Home automation lighting and appliance control
- Arduino, ESP8266 and ESP32 IoT switching projects
- Greenhouse pump, fan and valve control
- Small PLC and panel output expansion
Applications:
- Switching up to 1 mains lamps, fans or sockets from one microcontroller
- Driving 12V/24V solenoid valves and door strikes
- Timed or scheduled load control
- Motor direction switching using paired channels
Equivalent Models:
- 1-Channel 12V Relay Module
- 1-Channel Solid State Relay Module
- SainSmart Relay Board
Package Includes:
- 1 × 5V 1-Channel Relay Module Low-Level Trigger

Reviews
No reviews yet. Be the first to share your experience!