Back to Category
Shop By Departments

12V 4-Channel Relay Control Board with Optocoupler Isolation

₹130.00

In stock ?

In stock

Category: Brand:

12V 4-Channel Relay Control Board with Optocoupler Isolation is a 4-channel optocoupler-isolated relay control board using Songle SRD-12VDC-SL-C sugar cube relays. Each channel lets a 3.3V or 5V microcontroller GPIO (Arduino, ESP32, Raspberry Pi, PLC) safely switch an independent AC or DC load up to 10A at 250V AC, with a PC817 optocoupler and flyback diode protecting the logic side from inductive spikes.

Key Features:
  • 4 Independent Channels: Each relay provides its own NO, COM and NC screw terminals for separate loads.
  • Optocoupler Isolation: PC817 optocouplers separate the microcontroller inputs from the relay coil circuit.
  • Low-Level Trigger: A channel energises when its IN pin is pulled low (0V), the standard drive for these boards.
  • Separate JD-VCC Supply Option: Removing the VCC/JD-VCC jumper allows the relay coils to run from an independent supply for full isolation.
  • Status LEDs: Power LED plus one indicator LED per channel shows relay state.
  • Flyback Protection: Freewheeling diode across every coil suppresses back-EMF.
Technical Specifications:
  • Coil Voltage: 12V DC
  • Coil Current: Approx. 30 mA per energised channel
  • Input Trigger Current: 2 mA to 5 mA per channel
  • Trigger Logic: Active low
  • Contact Rating: 10A 250V AC / 10A 30V DC (resistive)
  • Contact Form: 4 × SPDT (1 Form C per channel)
  • Isolation: PC817 optocoupler per channel
  • Operating Temperature: -25°C to +70°C
Mechanical Specifications:
  • PCB: FR-4 double-sided board with milled isolation slots under relay contacts
  • Load Terminals: 4 × 3-pin 5.08 mm screw terminal blocks
  • Control Header: 6-pin 2.54 mm male header (GND, IN1–IN4, VCC) plus 3-pin JD-VCC jumper header
  • Mounting: 4 × M3 mounting holes
Dimensions:
  • Length: 75 mm
  • Width: 55 mm
  • Height: 19 mm
Pinout and Wiring:
  • GND: Logic ground
  • IN1–IN4: Channel control inputs (pull low to energise)
  • VCC: Logic supply for optocoupler LEDs (3.3V–5V)
  • JD-VCC: Relay coil supply (12V); bridged to VCC by jumper when sharing one supply
  • NO / COM / NC: Normally open, common and normally closed contacts for each channel
Datasheet Reference:
  • Datasheet Reference: Songle SRD-12VDC-SL-C relay datasheet and Sharp PC817 optocoupler datasheet.
Commonly Used in:
  • Home automation lighting and appliance control
  • Arduino, ESP8266 and ESP32 IoT switching projects
  • Greenhouse pump, fan and valve control
  • Small PLC and panel output expansion
Applications:
  • Switching up to 4 mains lamps, fans or sockets from one microcontroller
  • Driving 12V/24V solenoid valves and door strikes
  • Timed or scheduled load control
  • Motor direction switching using paired channels
Equivalent Models:
  • 4-Channel 5V Relay Module
  • 4-Channel Solid State Relay Module
  • SainSmart Relay Board
Package Includes:
  • 1 × 12V 4-Channel Relay Control Board with Optocoupler Isolation
Weight 45 g
Dimensions 67 × 47 × 20 mm
INPUT VOLTAGE

5V TO 35V

CURRENT CONSUMPTION

200 mA

SIGNAL VOLTAGE

3.3 to 5 V

SIGNAL CURRENT

8 mA

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “12V 4-Channel Relay Control Board with Optocoupler Isolation”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

12V 4-Channel Relay Control Board with Optocoupler Isolation

12V 4-Channel Relay Control Board with Optocoupler Isolation

₹130.00
Hi, How can I help you today?
Chat Assistant