ST7735 8P 128X160 SPI 1.8 Inch TFT LCD Screen Display Module

299.00

In stock

SKU: BR2-IFT-025-20 Category: Brand:

ST7735 8P 128X160 SPI 1.8 Inch TFT LCD Screen Display Module is a versatile, high-resolution color display designed for embedded systems and DIY electronics projects. This module utilizes the robust ST7735 driver IC to deliver 16-bit full-color graphics across a 1.8-inch diagonal screen. Consequently, it offers a significant visual upgrade over traditional monochrome character displays. By employing a high-speed Serial Peripheral Interface (SPI), the module requires only a few GPIO pins from your microcontroller. Furthermore, the integrated SD card slot on the rear provides a convenient method for storing and loading large image assets. Therefore, you can easily integrate this display into Arduino, ESP32, or STM32 platforms to create professional-grade user interfaces and data monitors.

Key Features:
  • Vibrant Full-Color Output: Supports up to 65K colors (RGB 5-6-5), ensuring that your icons, charts, and text appear sharp and professionally rendered.
  • High-Speed SPI Interface: Uses a 4-wire serial interface to maintain high frame rates while minimizing the wiring complexity for the host controller.
  • Built-in SD Card Slot: Features a dedicated micro-SD slot for data logging or storing bitmap images, which significantly expands the storage capabilities of your project.
  • Wide Viewing Angle: The Thin Film Transistor (TFT) technology provides better contrast and wider viewing angles compared to standard STN displays.
  • Flexible Power Compatibility: Operates efficiently on 3.3 V logic, however, many versions include an on-board regulator for 5 V compatibility.
Technical Specifications:
  • Display Driver IC: ST7735R / ST7735S
  • Resolution: 128 x 160 Pixels
  • Display Size: 1.8 Inch Diagonal
  • Interface Type: 4-Wire SPI (Serial Peripheral Interface)
  • Color Depth: 16-bit (65,536 colors)
  • Input Voltage: 3.3 V to 5.0 V DC
  • Backlight: High-brightness White LED (Active High)
  • IO Logic Level: 3.3 V (Level shifters recommended for 5 V logic)
Mechanical Specifications:
  • Module Type: 8-Pin Header (SPI Configuration)
  • PCB Material: High-durability FR-4
  • Screen Coating: Anti-glare protective film
  • Connector: Standard 2.54 mm pitch male pin header
Dimensions:
  • PCB Dimensions: ≈ 58.0 mm x 34.5 mm
  • LCD Active Area: ≈ 28.03 mm x 35.04 mm
  • Total Thickness: ≈ 6.5 mm (including SD slot)
  • Weight: ≈ 12.0 g
Pinout and Wiring:
  • VCC: Connect to 3.3 V or 5 V power supply.
  • GND: Connect to common circuit ground.
  • CS (Chip Select): SPI Chip Select pin (Active Low).
  • RESET: Hardware reset pin; drive low to reset the display controller.
  • A0 / DC: Data/Command selection pin.
  • SDA: SPI MOSI (Master Out Slave In) data line.
  • SCK: SPI Clock signal input.
  • LED: Backlight control pin; connect to 3.3 V for constant brightness or PWM for dimming.
Datasheet Reference:
Commonly Used in:
  • Microcontroller Prototyping: Enhancing Arduino, ESP8266, and Teensy projects with a full-color graphical user interface.
  • Handheld Devices: Creating portable gaming consoles, digital levels, or portable diagnostic tools.
  • Smart Home Displays: Developing compact dashboards for thermostats, weather stations, and energy monitors.
Applications:
  • Real-time Sensor Monitoring: Visualizing temperature, humidity, or pressure data using dynamic color graphs.
  • IoT Dashboards: Displaying network status, IP addresses, and cloud data updates.
  • Educational Electronics: Teaching students about SPI communication and pixel-based rendering.
  • Custom Media Players: Displaying album art or basic visualizers in DIY audio setups.
Equivalent Models:
  • ILI9163C 1.8″ TFT: A similar 128×160 SPI display that often uses nearly identical libraries and pinouts.
  • ST7789 1.3″ / 1.54″ TFT: High-resolution alternatives for projects requiring a smaller form factor with IPS clarity.
  • SSD1306 OLED: A common alternative for low-power monochrome needs, however, it lacks the color depth of the ST7735.
Package Includes:
  • 1 x ST7735 8P 128X160 SPI 1.8 Inch TFT LCD Screen Display Module

Additional information

Weight 20 g
Be the first to review “ST7735 8P 128X160 SPI 1.8 Inch TFT LCD Screen Display Module”

Reviews

There are no reviews yet.

error:

Main Menu

ST7735 8P 128X160 SPI 1.8 Inch TFT LCD Screen Display Module

ST7735 8P 128X160 SPI 1.8 Inch TFT LCD Screen Display Module

299.00

Add to cart
Hi, How can I help you today?
Chat Assistant