Back to Category
Shop By Departments

ULN2003 Stepper Motor Driver Board

₹49.00

In stock ?

In stock

Category: Brand:

ULN2003 Stepper Motor Driver Board is a widely adopted four-phase Darlington transistor driver module engineered for precise position control of unipolar stepper motors such as the ubiquitous 28BYJ-48. Powered by the high-voltage, high-current ULN2003A Darlington array IC, this breakout features four onboard status LEDs that visually display stepping sequences in real time. With integrated flyback suppression diodes, an onboard 5V-12V power header, and a keyed 5-pin JST-XH connector, it allows seamless plug-and-play connection to microcontrollers including Arduino, ESP32, STM32, and Raspberry Pi.

Key Features:
  • High-Current Darlington Array: Features 7 high-voltage, high-current NPN Darlington pairs capable of sinking up to 500mA per channel.
  • Four-Phase Status LEDs: Real-time visual feedback for A, B, C, and D coil excitation states during microstepping sequences.
  • Direct Plug-and-Play Connector: Keyed 5-pin XH-2.54mm connector designed for instantaneous connection with standard 28BYJ-48 stepper motors.
  • Integrated Clamp Diodes: Built-in transient suppression diodes safely absorb inductive spikes from motor coil de-energization.
  • Logic Level Flexibility: Easily triggered by 3.3V and 5.0V microcontroller GPIO pins without level shifting.
Technical Specifications:
  • Driver IC: Texas Instruments / STMicroelectronics ULN2003A
  • Operating Supply Voltage: 5.0V to 12.0V DC
  • Peak Collector Current: 500 mA per channel
  • Maximum Collector-Emitter Voltage: 50 V
  • Input Logic Voltage: 3.3V to 5.0V DC (TTL / CMOS compatible)
  • Drive Topology: Unipolar 4-phase (half-step or full-step sequence)
  • Operating Ambient Temperature: -20°C to +85°C
Mechanical Specifications:
  • PCB Architecture: Compact single-sided FR4 circuit board
  • Motor Interface: Keyed 5-pin JST-XH 2.54mm socket
  • Control Pins: Standard 2.54mm pitch male header pins (IN1-IN4)
  • Mounting Support: 4 × 3.0mm mounting holes
Dimensions:
  • Length: 35.0 mm
  • Width: 32.0 mm
  • Height: 12.0 mm
  • Weight: Approximately 12 g
Pinout and Wiring:
  • IN1: Phase A coil logic control input (connected to MCU digital pin).
  • IN2: Phase B coil logic control input.
  • IN3: Phase C coil logic control input.
  • IN4: Phase D coil logic control input.
  • 5V-12V (+): Positive DC motor supply rail.
  • GND (-): Common system ground.
  • Motor Port (1-5): Keyed connector for 28BYJ-48 unipolar stepper motor leads.
Datasheet Reference:
Commonly Used in:
  • Surveillance Cameras: Motorized pan-tilt camera positioning mechanisms.
  • HVAC Air Deflectors: Precision louvre angle positioning in air conditioners.
  • DIY Automated Blinds: Motorized window blind actuation and smart home curtain pullers.
Applications:
  • 28BYJ-48 Stepper Driving: Accurate position, speed, and rotational angle control in full-step, wave-drive, and half-step modes.
  • Relay and Solenoid Driving: Low-side switching of inductive loads up to 500mA.
  • High-Power LED Array Switching: Multi-channel digital sinking for indicator clusters.
Equivalent Models:
  • ULN2803A Driver Module: 8-channel Darlington array alternative offering an additional driving channel for complex switching.
  • A4988 Microstepping Driver: Dedicated bipolar stepper driver supporting up to 1/16 microstepping with internal current regulation.
  • TMC2208 SilentStepStick: Advanced bipolar driver offering Trinamic StealthChop for whisper-quiet stepper operation.
Package Includes:
  • 1 × ULN2003 Stepper Motor Driver Board
Weight 5.6 g

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “ULN2003 Stepper Motor Driver Board”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

₹49.00
Hi, How can I help you today?
Chat Assistant