Back to Category
Shop By Departments

TA6586 Based 5A Dual DC Motor Driver Module

₹185.00

In stock ?

In stock

Category: Brand:

TA6586 Based 5A Dual DC Motor Driver Module is a high-performance, compact dual H-bridge motor driver board engineered to control two brushed DC motors or one 4-wire two-phase stepper motor. Built around two dedicated TA6586 monolithic motor driver ICs, this module can deliver up to 5A peak current per channel while offering superior energy efficiency and significantly lower heat dissipation compared to legacy bipolar drivers like the L298N. Compatible with 3.3V and 5V microcontroller logic (Arduino, Raspberry Pi, ESP32, STM32), it is the ideal choice for competition robotics, smart vehicles, and automated mechatronics.

Key Features:
  • Dual Independent H-Bridge Drivers: Controls two DC motors independently in forward, reverse, brake, and coast modes.
  • High Current Output: Delivers 1.6A continuous current and up to 5A peak current per channel.
  • Low Internal Voltage Drop: Modern low-RDSon internal MOSFET power stage provides maximum voltage to motors with minimal heat loss.
  • Microcontroller Compatible: Standard 3.3V / 5V TTL logic inputs allow direct connection without logic level shifters.
  • Comprehensive Thermal Protection: Built-in thermal shutdown and under-voltage lockout circuits protect the module from stall overcurrents.
  • Convenient Screw Terminals: Heavy-duty terminal blocks ensure secure connections for high-current motor and power leads.
Technical Specifications:
  • Driver ICs: 2 x TA6586 Monolithic H-Bridge Drivers
  • Motor Supply Voltage: 6V to 15V DC
  • Logic Signal Voltage: 3.0V to 5.5V DC (3.3V and 5V compatible)
  • Continuous Current per Channel: 1.6 A
  • Peak Surge Current per Channel: 5 A
  • Control Interface: 6-pin header (IN1, IN2, IN3, IN4, ENA, ENB)
  • Standby Quiescent Current: Less than 2 μA
  • Operating Temperature: -20°C to +85°C
Mechanical Specifications:
  • PCB Material: FR-4 Industrial Double-Sided Glass Fiber Board
  • Mounting Holes: 4 corner mounting holes for M3 standoffs
  • Terminal Blocks: 3 x 2-pin screw clamp terminals (Power In, Motor A Out, Motor B Out)
  • Status Indicator: Onboard power LED indicator
  • Weight: Approximately 14 grams
Dimensions:
  • Length: 42 mm
  • Width: 42 mm
  • Height: 15 mm
Pinout and Wiring:
  • VCC / +V: Motor Power Supply Input (6V to 15V DC)
  • GND: Ground (Connect to common ground with microcontroller)
  • IN1 / IN2: Logic directional inputs for Motor Channel A
  • IN3 / IN4: Logic directional inputs for Motor Channel B
  • ENA / ENB: Speed enable pins (Connect to PWM signal for speed control, or jumper HIGH for full speed)
  • MOTOR A Terminals: Connects to Brushed DC Motor A
  • MOTOR B Terminals: Connects to Brushed DC Motor B
Datasheet Reference:
  • Refer to the TA6586 monolithic bi-directional motor driver IC datasheet for internal logic truth tables and thermal protection thresholds.
Commonly Used in:
  • RoboCup and national competition autonomous mobile robot platforms
  • High-traction 2WD and 4WD smart car chassis with high stall currents
  • Miniature motorized conveyor systems, robotic grippers, and pan-tilt mechanisms
  • STEM robotics labs and microcontroller mechatronic development projects
Applications:
  • Differential Drive Robots: Precision bidirectional speed and steering control for autonomous mobile robots.
  • Bipolar Stepper Motor Driving: Driving 4-wire miniature stepper motors in full-step or half-step modes.
  • Electric Door Locks & Latches: Driving momentary high-surge DC solenoids and motorized deadbolts.
  • High-Torque Toy Retrofitting: Replacing weak stock motor driver boards in RC crawlers and trucks.
Equivalent Models:
  • TB6612FNG Dual Driver: Toshiba dual MOSFET driver supporting up to 1.2A continuous / 3.2A peak with dedicated standby pin.
  • L298N Dual Motor Driver: Traditional BJT-based driver with onboard 5V regulator but higher internal voltage drop.
  • DRV8833 Dual H-Bridge Driver: TI low-voltage motor driver supporting 1.5A continuous per channel.
  • MX1508 Dual Motor Driver: Lower power alternative for ultra-compact battery-powered miniature toys.
Package Includes:
  • 1 × TA6586 Based 5A Dual DC Motor Driver Module
Weight 10 g
Dimensions 40 × 25 × 15 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “TA6586 Based 5A Dual DC Motor Driver Module”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

TA6586 Based 5A Dual DC Motor Driver Module

TA6586 Based 5A Dual DC Motor Driver Module

₹185.00
Hi, How can I help you today?
Chat Assistant