Back to Category
Shop By Departments

30A 1-Channel 5V Relay Module with Optocoupler Isolation High and Low Level Trigger

₹199.00

Out of stock ?

Out of stock

Category: Tag: Brand:

30A 1-Channel 5V Relay Module with Optocoupler Isolation High and Low Level Trigger is an extra-heavy-duty industrial switching module engineered with a high-capacity 30A power relay and dual optocoupler isolation. Capable of switching resistive loads up to 30 Amperes at 250V AC (7500 Watts), it equips low-voltage microcontrollers with the power to safely control large industrial heaters, motors, air conditioners, and immersion elements.

Key Features:
  • Extra-High 30A Switching Rating: Heavy-duty silver alloy contacts safely switch electrical loads up to 30A at 250V AC.
  • Galvanic Optocoupler Isolation: Protects microcontrollers against severe electrical ground loops and high-voltage back-EMF.
  • High & Low Level Trigger Selectable: Onboard jumper header easily configures active-high or active-low trigger input logic.
  • Thick High-Current PCB Traces: Reinforced heavy copper traces with solder-window tinning handle continuous 30A currents without overheating.
  • High-Torque Screw Terminals: Large 9.5mm pitch barrier terminal blocks provide secure clamping for thick 10 AWG to 14 AWG wiring.
  • Fault-Tolerant Input Circuit: Relay remains de-energized if control signal lines become disconnected or floating.
Technical Specifications:
  • Coil Voltage: 5.0V DC (supports 4.5V to 5.5V DC)
  • Coil Current: ~185 mA during activation
  • Trigger Current: 5 mA (compatible with 3.3V and 5.0V microcontrollers)
  • Maximum Switching Voltage: 250V AC / 30V DC
  • Maximum Switching Current: 30A (Resistive load)
  • Maximum Switching Power: 7500 VA / 900 W
  • Contact Form: 1 Form C (SPDT – NO, COM, NC)
  • Operating Temperature: -25°C to +70°C
Mechanical Specifications:
  • PCB Structure: Double-sided through-hole FR-4 with high-current copper layer
  • Terminals: 3-pin heavy-duty barrier terminal block and 4-pin 2.54mm logic header
  • Mounting: 4 × M3 corner mounting holes
  • Weight: Approximately 38 grams
Dimensions:
  • Length: 50.0 mm
  • Width: 33.0 mm
  • Height: 24.0 mm
Pinout and Wiring:
  • DC+: 5V DC Main Power Supply Input
  • DC-: System Ground (0V)
  • IN: Trigger Signal Input (connects to MCU GPIO)
  • NO: Normally Open High-Current Terminal
  • COM: Common High-Current Terminal (connects to AC Mains Live)
  • NC: Normally Closed High-Current Terminal
Datasheet Reference:
  • Datasheet Reference: Consult SLA-05VDC-SL-C 30A Power Relay Datasheet and optocoupler isolation schematics.
Commonly Used in:
  • Industrial electric water heater and immersion boiler controllers
  • Heavy agricultural water pump and irrigation motor starters
  • Electric vehicle EV charging station power contactor triggers
  • Commercial HVAC air compressor and refrigeration unit switching
Applications:
  • Controlling high-wattage heating elements up to 7.5 kW from Arduino or ESP32
  • Automating heavy-duty workshop machinery and dust collector systems
  • Smart home whole-house geyser and HVAC energy management
  • Solar inverter high-power diversion load switching
Equivalent Models:
  • 30A 1-Channel 12V Relay Module
  • 30A 2-Channel Relay Module
  • 40A Solid State Relay (SSR)
Package Includes:
  • 1 × 30A 1-Channel 5V Relay Module with Optocoupler Isolation High and Low Level Trigger
Weight 40 g
Dimensions 70 × 40 × 25 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “30A 1-Channel 5V Relay Module with Optocoupler Isolation High and Low Level Trigger”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

30A 1-Channel 5V Relay Module with Optocoupler Isolation High and Low Level Trigger

30A 1-Channel 5V Relay Module with Optocoupler Isolation High and Low Level Trigger

₹199.00
Hi, How can I help you today?
Chat Assistant