PIC K150 MCU MICROCORE BURNER USB DOWNLOADER

Support the burning, reading, encryption and other functions of most popular PIC chips. No external power supply is needed. Communication and power supply are accomplished by only one USB print line without any cable. Burning speed is much faster than PICSTARTPLUS. It is easy to read out the contents of the chip program area. Fully automatic writing verification. Comprehensive information prompts, so that users can clearly understand the working status. The ZIF burner with 40pin can burn 8 to 40 feet PIC microcontroller directly, and the chip can be burned or converted by ICSP on-line. Chips other than 8 pin 40 pin can be downloaded directly online through on-board ICSP output. Compatible with Windows 98 and Windows 2000/NT, Windows XP/Windows 7 and other operating systems.

Protocol Number: To help match hardware and firmware there is a protocol number in each. If they are the same (P016) in this case then the software and firmware are matched. This should stop problems with matching firmware with MicroPro versions in the past.

Upgrading. You can upgrade by buying and programming a second 628 (-20/P or 628A) PIC, or if you have access to a second PIC programmer and reprogram the existing 628 with the later hex file.

ICSP: Does not support low voltage programming. The LOW pin is an open collector output, which when active will pull the LOW pin to ground. It can be used in ICSP to hold the LVP pin low while programming, or the OSC1 pin, or any part on the target board which may need control (in this manner) during programming.

K150 Software:

• • Download diypack25 and the USB to Serial driver

Package Includes:

• • 1 x Finished Programmer
  • 1 x High-quality USB cable
  • 1 x ICSP Cable