Back to Category
Shop By Departments

L298P Motor Driver Shield for Arduino

₹599.00

In stock ?

In stock

SKU: SHIELD-1-18 Category: Brand:

L298P Motor Driver Shield for Arduino is a high-current dual full-bridge motor driver expansion board engineered to mount directly on top of Arduino Uno, Leonardo, and Mega boards. Built around the robust L298P surface-mount driver IC, this shield delivers up to 2.0A continuous current per channel to drive two independent brushed DC motors or one 4-wire bipolar stepper motor. In addition to high-torque motor driving, it integrates an onboard buzzer, an HC-SR04 ultrasonic distance sensor header, a Bluetooth module interface, and dedicated servo motor headers, making it the ultimate plug-and-play platform for robotics.

Key Features:
  • Direct Arduino Shield Form Factor: Seamless stackable pin-header design connects directly to Arduino Uno, Mega 2560, and Leonardo without jumper wires.
  • Dual High-Current H-Bridge: Driven by the STMicroelectronics L298P IC to provide 2A continuous drive per motor channel.
  • Onboard Sensor & Wireless Ports: Dedicated header clusters for HC-SR04 ultrasonic sensor, Bluetooth (HC-05/06), and standard 3-pin RC servos.
  • Integrated Audio Buzzer: Onboard piezo buzzer connected to digital pin D4 for audible telemetry, alerts, and obstacle warning.
  • External Power Terminal Block: High-current screw terminal separates high-voltage motor power from sensitive Arduino logic power.
Technical Specifications:
  • Motor Drive Supply Voltage (VIN): 6.5V to 18.0V DC (via screw terminal)
  • Logic Supply Voltage: 5.0V DC (drawn directly from Arduino 5V rail)
  • Continuous Output Current: 2.0 A per channel (with proper PCB thermal dissipation)
  • Peak Surge Output Current: 3.0 A per channel
  • Motor Control Pins: D10 & D12 (Motor A Speed/Direction), D11 & D13 (Motor B Speed/Direction)
  • Ultrasonic Sensor Pins: Echo (D7), Trigger (D8)
  • Servo Motor Pin: Digital Pin D9
  • Buzzer Pin: Digital Pin D4
Mechanical Specifications:
  • Board Architecture: Standard Arduino R3 expansion shield footprint
  • Motor Outputs: Heavy-duty blue screw terminals for Motor A and Motor B
  • Shield Headers: Standard stackable pass-through female pin headers
  • PCB Finish: High-grade FR4 with gold-plated contact pads
Dimensions:
  • Length: 68.5 mm
  • Width: 53.5 mm
  • Height: 19.0 mm
  • Weight: Approximately 38 g
Pinout and Wiring:
  • VIN & GND (Terminal): External motor battery input (connect 7.4V – 12V DC battery pack).
  • MOTORA (OUT1/OUT2): Left drive motor output screw terminals.
  • MOTORB (OUT3/OUT4): Right drive motor output screw terminals.
  • D10 / D12: Left motor PWM speed and direction control pins.
  • D11 / D13: Right motor PWM speed and direction control pins.
  • Ultrasonic Header: VCC, GND, Trigger (D8), Echo (D7).
  • Bluetooth Header: VCC, GND, TX (D0/D2), RX (D1/D3).
  • Servo Header: Signal (D9), VCC (5V), GND.
Datasheet Reference:
Commonly Used in:
  • Arduino Smart Robot Cars: All-in-one chassis controller combining motor drive, ultrasonic avoidance, and Bluetooth telemetry.
  • Mobile Inspection Rovers: Pan-tilt camera servo actuation combined with differential rover steering.
  • Educational STEM Workshops: Clean, cable-free robotic chassis assembly for students and makers.
Applications:
  • Brushed DC Motor Control: Independent speed, forward, reverse, and rapid electronic braking for dual DC motors.
  • Two-Phase Stepper Driving: Four-pin sequence stepping for NEMA 17 bipolar stepper motors up to 2A.
  • Multi-Sensor Obstacle Avoidance: Autonomous navigation using integrated ultrasonic distance mapping and audio feedback.
Equivalent Models:
  • L293D Motor Driver Shield: Four-channel alternative capable of driving up to 4 DC motors or 2 stepper motors at lower current (600mA/ch).
  • L298N Standalone Motor Module: Breadboard-mountable module sharing the same core H-bridge silicon for universal microcontroller hookup.
  • VNH2SP30 Monster Moto Shield: Ultra-high-power shield delivering up to 14A continuous (30A peak) for heavy electric vehicle projects.
Package Includes:
  • 1 × L298P Motor Driver Shield for Arduino
Weight 30 g
Dimensions 70 × 55 × 15 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “L298P Motor Driver Shield for Arduino”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

L298P Motor Driver Shield for Arduino

L298P Motor Driver Shield for Arduino

₹599.00
Hi, How can I help you today?
Chat Assistant