220V AC Sound Activated Light Sensor Switch Auto On Off Smart Delay Module automates lighting control by combining acoustic sound detection with ambient light sensing on standard alternating current circuits. This compact smart switch module remains dormant during bright daylight and activates connected lamps only in dark environments when sound triggers the sensor. Consequently, it eliminates unnecessary daytime power consumption while providing hands-free illumination in passageways and utility spaces. Furthermore, the built-in automatic shutoff delay turns the connected light off after a set duration when sound stops. Therefore, homeowners and facility managers can boost energy efficiency and convenience with minimal wiring complexity.
Key Features:
- Dual Acoustic and Light Control: Combines sound sensing with an ambient light threshold so the switch triggers only in darkness.
- Automatic Delay Shutoff: Keeps the connected load active for approximately 40 seconds ± 10 seconds before switching off automatically.
- Direct AC Mains Operation: Connects directly to standard household AC power lines without requiring a separate low-voltage adapter.
- Energy-Saving Standby Behavior: Stays in a dormant state during bright conditions, thereby conserving electricity throughout daylight hours.
- Compact Module Footprint: Fits easily inside tight switch boxes, luminaire housings, and compact enclosures.
Technical Specifications:
- Model Reference: MR-SK50A Acoustic-Light Sensor Switch Module
- Rated Input Voltage: AC 220V (Operating range AC 180V to 265V, 50/60Hz)
- Maximum Load Power: ≤ 40W (Verify fixture rating before connecting LED, incandescent, or compact lamps)
- Sound Sensitivity Trigger: ≈ 50 dB to 70 dB within up to 6 meters
- Photosensitive Light Threshold: ≤ 10 Lux for dark-environment activation
- Delay Duration: ≈ 40 seconds ± 10 seconds auto-off timer
- Ingress Protection Rating: IP22
- Operating Temperature: -20°C to 45°C
Mechanical Specifications:
- Enclosure Material: Flame-resistant polycarbonate (PC) housing
- Housing Color: White
- Sensor Elements: Integrated acoustic pickup and onboard photoresistor (LDR)
- Mounting Style: Compact modular body suited for recessed or fixture-integrated installation
Dimensions:
- Module Length: ≈ 38.0 mm
- Module Width: ≈ 28.0 mm
- Module Height: ≈ 16.0 mm
- Weight: ≈ 15.0 g to 20.0 g
Pinout and Wiring:
- AC Input (Live / Neutral): Connects to the incoming 220V AC supply line after switching off mains power.
- Switched Load Output: Wires in series with the controlled lamp fixture within the rated wattage limit.
- LDR / Acoustic Sensor Window: Faces the room or passageway so ambient light and sound reach the sensors unobstructed.
- Note: However, always disconnect main AC power before wiring and ensure the load never exceeds rated capacity or shorts out.
Datasheet Reference:
- Download Sound Sensor Switch Manual PDF
Commonly Used in:
- Staircases and Corridors: Illuminating shared hallways and steps automatically when footsteps or voices occur at night.
- Bathrooms and Utility Rooms: Providing hands-free lighting in spaces where users enter with full hands.
- Warehouses and Storage Areas: Switching aisle or entry lights on temporarily during intermittent access.
Applications:
- Automated Entryway Lighting: Triggering indoor porch or foyer lamps in low-light conditions.
- LED Downlight and Ceiling Lamp Control: Adding smart auto-off timing to compatible residential lighting fixtures.
- Energy Conservation Retrofits: Reducing wasted lamp runtime in low-traffic commercial or domestic zones, whereas manual wall switches stay off by default.
Equivalent Models:
- PIR Motion Sensor AC Switch Module: Detects infrared body heat movement instead of acoustic sound, although line-of-sight placement works differently than sound pickup.
- Standalone LDR Dusk-to-Dawn Switch: Turns lights on continuously throughout the night based solely on darkness, whereas this module adds sound activation and timed shutoff.
- 5V DC Sound Sensor Module (LM393 / KY-038): Outputs a low-voltage digital or analog signal for microcontrollers, unlike this module which switches AC lighting directly.
Package Includes:
- 1 x 220V AC Sound Activated Light Sensor Switch Auto On Off Smart Delay Module
