0.69 Inch 96×16 White OLED Display

0.69 Inch 96×16 White OLED Display is an ultra-compact, high-contrast visualization solution perfectly suited for wearable technology and space-constrained embedded systems. This miniature module utilizes self-emissive Organic Light-Emitting Diode technology, which means it requires no backlight and offers superior power efficiency. Consequently, it delivers deep black levels and crisp white text that remains legible even in dark environments. Furthermore, the integration of the SSD1306 controller allows for seamless communication with microcontrollers via the I2C interface. Therefore, developers can easily implement complex telemetry or status icons into the smallest of enclosures without compromising on visual clarity.

Key Features:

• High Contrast Ratio: The self-illuminating pixels provide a true black background and sharp white foreground, ensuring excellent readability.
• Ultra-Low Power: Since only active pixels draw current, this display significantly extends the battery life of portable electronic devices.
• Wide Viewing Angle: This OLED technology maintains color consistency and brightness at viewing angles exceeding 160°.
• Simplified Interface: The module uses a 4-pin I2C (I²C) protocol, which minimizes the number of required GPIO pins on the host processor.
• Fast Response Time: It offers nearly instantaneous pixel switching, making it suitable for scrolling text and simple animations.

Technical Specifications:

• Display Resolution: 96 × 16 Pixels
• Display Color: White
• Driver IC: SSD1306 (or compatible)
• Communication Interface: I2C (Address typically 0x3C or 0x3D)
• Operating Voltage (VCC): 3.3 V to 5.0 V DC
• Logic Level: 3.3 V Compatible
• Operating Temperature: −40°C to +70°C

Mechanical Specifications:

• Display Type: OLED (Passive Matrix)
• Panel Material: Glass with integrated FPC
• Mounting: Solderable header pins or surface mount pads (module dependent)
• Duty Cycle: 1/16 Duty

Dimensions:

• Screen Size: 0.69 Inch (Diagonal)
• Active Area: ≈ 17.26 mm × 3.18 mm
• Module Size: ≈ 26.0 mm × 11.0 mm (varies by carrier board)
• Pixel Pitch: ≈ 0.18 mm × 0.20 mm

Pinout and Wiring:

• GND: Connect to the system ground (0 V).
• VCC: Connect to the positive power supply (3.3 V − 5 V).
• SCL (Serial Clock): Connect to the I2C clock pin of the microcontroller.
• SDA (Serial Data): Connect to the I2C data pin of the microcontroller.
• Wiring Note: However, ensure that pull-up resistors are present on the I2C lines if they are not already integrated into your development board.

Datasheet Reference:

• Download SSD1306 Controller Datasheet

Commonly Used in:

• Arduino and ESP32 Projects: Adding a debug screen or user interface to DIY electronics.
• Smart Wearables: Integrating into fitness trackers or smart rings due to its narrow form factor.
• Small Appliances: Serving as a status indicator for digital thermometers or portable chargers.

Applications:

• Real-Time Monitoring: Displaying battery percentages, temperature readings, or sensor data.
• Menu Navigation: Providing a compact UI for selecting modes in handheld devices.
• Electronic Cigarettes: Displaying puff counts and wattage settings in vaping hardware.

Equivalent Models:

• 0.91 Inch OLED: A slightly larger alternative with 128×32 resolution if space permits.
• UG-9616HSAGF01: A common manufacturer part number for this specific 0.69-inch panel size.
• SSD1306 0.49 Inch OLED: In contrast, this model offers an even smaller footprint for extreme miniaturization.

Package Includes:

• 1 x 0.69 Inch 96×16 White OLED Display Module