XC6206P332MR (662K) 3.3V 200mA LDO Positive Voltage Regulator SOT-23
₹10.00
- Input Voltage Min: 1.8V
- Input Voltage Max: 6V
- Output Voltage Nom.: 3.3V
- Output Current: 200mA
- IC, POS VOLT REG, 0.3A, 3.3V, SOT23-3
- Dropout Voltage Vdo: 250mV
Frequently Bought Together
XC6206P332MR (662K) 3.3V 200mA LDO Positive Voltage Regulator SOT-23 provides a precise and highly stable power source for low-power electronic devices and battery-operated systems. This high-accuracy, low dropout (LDO) CMOS voltage regulator delivers a fixed 3.3V output while maintaining an extremely low quiescent current. Consequently, it extends battery life in portable applications where every microampere of power conservation matters. The device utilizes a built-in current limiter and a feedback circuit to ensure reliable performance under varying load conditions. Furthermore, its miniature SOT-23 package makes it an ideal solution for space-constrained PCB designs. Therefore, you should integrate the XC6206P332MR into your next project to achieve efficient voltage regulation with minimal board footprint.
Key Features:
- Ultra-Low Quiescent Current: The device consumes typically only 1.0 μA, which significantly reduces standby power consumption in battery-powered gadgets.
- Low Dropout Voltage: It features a low dropout of approximately 250 mV at a 100 mA load, allowing the regulator to maintain a stable output even as the input battery voltage nears 3.3V.
- High Output Accuracy: CMOS technology ensures a highly precise output voltage with a tolerance of ±2% under standard operating conditions.
- Integrated Protection: The internal current limiting circuit protects the regulator and the connected load from accidental over-current or short-circuit damage.
- Ceramic Capacitor Compatible: This regulator remains stable even when using low-ESR ceramic capacitors, simplifying the selection of external filtering components.
Technical Specifications:
- Output Voltage (Fixed): 3.3 V
- Input Voltage Range: 1.8 V to 6.0 V
- Maximum Output Current: 200 mA (within power dissipation limits)
- Dropout Voltage: 160 mV at IOUT = 100 mA (typical)
- Quiescent Current: 1.0 μA (typical)
- Output Voltage Accuracy: ±2%
- Operating Temperature Range: −40°C to +85°C
Mechanical Specifications:
- Package Type: SOT-23 (3-pin Surface Mount)
- Top Mark: 662K (Standard identification for XC6206P332MR)
- Lead Material: Solder-plated copper alloy
- Encapsulation: Molded plastic (UL94V-0 flammability rated)
Dimensions:
- Body Length: ≈ 2.9 mm
- Body Width (including leads): ≈ 2.8 mm
- Body Height: ≈ 1.1 mm
- Pin Pitch: ≈ 0.95 mm
Pinout and Wiring:
- Pin 1 (VSS/GND): Connect this pin to the common circuit ground.
- Pin 2 (VOUT): This pin provides the regulated 3.3V output; attach a 1μF ceramic capacitor between here and ground for stability.
- Pin 3 (VIN): This is the unregulated DC input pin; connect a 1μF bypass capacitor to ground to filter incoming noise.
- Wiring Note: However, always ensure the input voltage stays below the 6.0V maximum rating to prevent thermal damage to the CMOS structure.
Datasheet Reference:
Commonly Used in:
- IoT Node Devices: Providing the primary power rail for ESP8266, ESP32, and LoRa modules in battery-powered remote sensors.
- Wearable Electronics: Powering small fitness trackers and smartwatches where space and energy efficiency are critical.
- Reference Voltage Sources: Serving as a stable 3.3V reference for analog-to-digital converters (ADCs) in precision instruments.
Applications:
- Battery Powered Equipment: Regulating power from Li-Po or Li-Ion batteries down to logic-level voltages.
- Mobile Phones and Tablets: Maintaining secondary voltage rails for specific internal peripherals.
- Smart Cards: Integrating into high-security electronic cards requiring tiny, efficient power management.
Equivalent Models:
- MCP1700-3302E/TT: A widely used 3.3V LDO from Microchip with similar low quiescent current characteristics.
- RT9193-33: A common alternative, however, check the pinout as some variants include an extra enable pin.
- AP2127N-3.3: A functionally similar positive voltage regulator available in the same SOT-23 package.
Package Includes:
-
- 1 X XC6206P332MR SOT XC6206P332 SOT23 XC6206 SMD(662K) 3.3V/0.5A Positive Fixed LDO Voltage regulator
Additional information
| Weight | .1 g |
|---|---|
| INPUT VOLTAGE | 6V |
| OUTPUT CURRENT | 200 mA |







Reviews
There are no reviews yet.