Back to Category
Shop By Departments

SIM900 GPRS/GSM Wireless Expansion Shield for Arduino UNO

₹899.00

In stock ?

In stock

Category: Brand:

SIM900 GPRS/GSM SHIELD is a quad-band GSM/GPRS wireless communication expansion board designed to seamlessly stack onto Arduino UNO and Mega development platforms. Built around the reliable SIMCom SIM900 cellular module, it enables microcontrollers to transmit and receive SMS text messages, make and answer voice calls, connect to the internet via GPRS data connections, and interface with remote IoT cloud servers.

Key Features:
  • Quad-Band Worldwide Coverage: Operates on 850 / 900 / 1800 / 1900 MHz frequencies, ensuring global compatibility with 2G GSM cellular networks.
  • Comprehensive Cellular Functions: Supports standard SMS messaging, voice calls, audio input/output, and GPRS data transmission (TCP/IP, HTTP, FTP).
  • Standard AT Command Control: Controlled via standard Hayes AT commands (GSM 07.07, 07.05 and SIMCom enhanced AT command sets).
  • Selectable Serial Port: Onboard jumper blocks allow selecting between software serial (pins D7/D8) and hardware serial (D0/D1) communication.
  • Standard Audio Jacks: 3.5mm onboard headphone and microphone audio jacks for full voice call integration.
  • Real-Time Clock (RTC): Onboard RTC support with dedicated coin cell battery backup holder (CR1220).
  • External Antenna Connection: Onboard SMA female connector supplied with an external high-gain rubber duck antenna.
Technical Specifications:
  • Cellular Module: SIMCom SIM900 Quad-Band GSM/GPRS engine
  • Network Frequencies: 850 / 900 / 1800 / 1900 MHz
  • GPRS Multi-Slot Class: Class 10 / Class 8; GPRS mobile station Class B
  • GPRS Data Speed: Max 85.6 kbps downlink / uplink
  • Transmission Power: Class 4 (2W @ 850/900 MHz), Class 1 (1W @ 1800/1900 MHz)
  • Operating Logic Voltage: 5V compatible logic (onboard level shifting for 2.8V SIM900 core)
  • External Supply Voltage: 9V to 12V DC (recommended 9V 2A via external DC barrel jack to supply 2A GSM burst currents)
  • Low Power Consumption: 1.5 mA in sleep mode
  • Operating Temperature: -40°C to +85°C
Mechanical Specifications:
  • Form Factor: Arduino UNO R3 standard shield footprint
  • Board Material: Multi-layer FR4 PCB with high-current power routing
  • Antenna Connector: Standard brass SMA female connector
  • SIM Card Holder: Full-size standard push-flip SIM card slot on underside/top
  • Weight: Approximately 38 g (including antenna)
Dimensions:
  • Overall Length: 85.0 mm (including antenna connector)
  • Overall Width: 57.0 mm
  • Overall Height: 20.0 mm
Pinout and Wiring:
  • TX/RX Jumpers: Configurable jumper block to route module TX/RX to Arduino D0/D1 (hardware UART) or D7/D8 (software serial)
  • Power Key Pin (D9): Software power-on/power-off trigger via Arduino digital pin D9
  • External DC Power Jack: 5.5mm × 2.1mm center-positive jack accepting 9V–12V DC (minimum 2A rated power adapter required)
  • Audio Interface: 3.5mm stereo jacks for microphone and earphone
  • Status Indicators: PWR LED (power status), NetLight LED (cellular network registration status)
Datasheet Reference:
  • Refer to the SIMCom SIM900 Hardware Design manual and AT Command Set documentation for complete AT command syntax, network registration states, and GPRS TCP/IP configuration.
Commonly Used in:
  • Remote weather stations and agricultural environmental telemetry loggers
  • Automotive GPS vehicle tracking and fleet management systems
  • Industrial machine fault alarm systems sending urgent SMS text alerts
  • Remote electrical appliance control via DTMF tones or incoming SMS commands
Applications:
  • Automated SMS notification systems
  • Remote machine-to-machine (M2M) telemetry
  • Cellular IoT gateway for field sensors
  • Vehicle tracking and geo-fencing (paired with GPS)
  • Remote security systems with voice alert dialing
Equivalent Models:
  • SIM800L GPRS/GSM Module
  • Seeed Studio GPRS Shield V2.0
  • IComSat SIM900 GSM/GPRS Shield
  • A6 GPRS/GSM Prototyping Module
Package Includes:
  • 1 × SIM900 GPRS/GSM SHIELD
Weight 50 g
Dimensions 90 × 60 × 15 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “SIM900 GPRS/GSM Wireless Expansion Shield for Arduino UNO”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

You may also like…

SIM900 GPRS/GSM Wireless Expansion Shield for Arduino UNO

SIM900 GPRS/GSM Wireless Expansion Shield for Arduino UNO

₹899.00
Hi, How can I help you today?
Chat Assistant