Back to Category
Shop By Departments

RDA5807M Stereo FM Radio Receiver Module

₹76.80

In stock ?

In stock

SKU: SR-10007 Category: Brand:

RDA5807M Stereo FM Radio Receiver Module is a broadcast FM stereo radio tuner solution based on the single-chip RDA Microelectronics RDA5807M integrated circuit. Designed to provide high-sensitivity radio reception in ultra-compact form factors, consequently, this module enables makers and engineers to integrate worldwide FM broadcast reception into embedded designs. The onboard chip integrates a digital low-IF tuner, autonomous channel search engine, digital audio decoder, and stereo 32-Ω headphone output driver. Operating from an energy-efficient 2.7V to 3.6V supply rail, it communicates with microcontrollers using standard two-wire I2C communication. Furthermore, the RDA5807M includes onboard digital noise suppression, programmable bass boost, and digital volume control. Therefore, incorporating this RDA5807M Stereo FM Radio Receiver Module provides portable radios, smart alarms, and hobby electronics with reliable wireless audio reception.

Key Features:
  • Worldwide FM Band Coverage: Tunable across 50 MHz to 108 MHz including European, US, and Japanese broadcast bands.
  • Integrated Low-IF Architecture: Fully integrated RF front-end eliminates bulky external intermediate frequency filters.
  • Two-Wire I2C Serial Interface: Direct digital control via standard I2C commands compatible with Arduino and ESP boards.
  • Built-In Audio Stereo DAC: Features an integrated digital-to-analog converter that directly drives 32-Ω headphones or preamps.
  • Autonomous Search & Tuning: Hardware-accelerated station scanning locates active broadcast frequencies automatically.
  • Advanced Audio Enhancement: Features programmable bass boost, digital audio mute, and multi-level volume control.
Technical Specifications:
  • Operating Power Supply: 2.7 V to 3.6 V DC (3.3 V nominal)
  • Current Consumption: ≈ 20 mA during active broadcast reception
  • Power-Down Standby Current: ≤ 5 µA in sleep mode
  • FM Tuning Frequency Range: 50 MHz to 108 MHz
  • Channel Spacing: 100 kHz, 200 kHz, 50 kHz, or 25 kHz
  • Audio Output Power: Direct drive for 32 Ω stereo headphone loads
  • Communication Protocol: Standard I2C Serial Bus (up to 400 kHz)
  • Audio Signal-to-Noise Ratio: ≈ 58 dB
  • Dimensions: ≈ 11.2 mm × 11 mm × 2 mm
Mechanical Specifications:
  • Substrate / Package: High-grade FR4 double-sided PCB or molded protective casing
  • Terminal Connection: Standard 2.54 mm pitch through-hole solder pins or screw terminal block
  • Mounting Support: Integrated chassis mounting holes compatible with M2.5 / M3 hardware
  • Form Factor: Low-profile footprint engineered for tight embedded enclosures
Dimensions:
  • Body Length: Standard miniature hardware dimensions
  • Body Width: Optimized narrow profile for modular stacking
  • Pin Pitch: 2.54 mm (0.1 inch) breadboard-compatible spacing
  • Net Weight: Ultra-lightweight construction for portable and mobile robotics
Pinout and Wiring:
  • VCC: Regulated 3.3V DC power supply input pin.
  • GND: System common ground reference pin.
  • SDA: I2C serial data line for microcontroller register programming.
  • SCL: I2C serial clock input line.
  • ROUT: Right channel analog audio output pin for headphones or line input.
  • LOUT: Left channel analog audio output pin for headphones or line input.
  • ANT: FM RF antenna input connection; attach 75 cm wire for quarter-wave reception.
Datasheet Reference:
Commonly Used in:
  • DIY Portable FM Radios: Creating pocket-sized broadcast radio receivers controlled by Arduino Nano or ATmega328P.
  • Smart Bedside Clocks: Adding FM radio wake-up alarms to connected IoT alarm clock consoles.
  • Car Radio Converters: Retrofitting vintage automobile sound heads with digital FM broadcast functionality.
Applications:
  • Broadcast Audio Projects: Integrating broadcast listening with external audio amplifier modules to drive loud bookshelf speakers.
  • Emergency Notification Receivers: Building low-power emergency weather and alert radio monitoring stations.
  • Educational STEM Labs: Demonstrating RF reception principles, digital signal decimation, and I2C registers in classrooms.
Equivalent Models:
  • Pin-Compatible Industry Equivalent: Standard commercial equivalent module with matched pinouts and voltage ratings.
  • Integrated Breakout Alternative: Surface-mount IC alternative offering equivalent functional performance.
  • High-Precision Variant: Alternative sensor series offering calibrated digital bus communication, whereas this module provides straightforward plug-and-play operation.
Package Includes:
  • 1 × RDA5807M Stereo FM Radio Receiver Module
Weight 1 g
Dimensions 11 × 11 × 2 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
0.00
0 Reviews
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Be the first to review “RDA5807M Stereo FM Radio Receiver Module”

You must be logged in to post a review.

Reviews

No reviews yet. Be the first to share your experience!

RDA5807M Stereo FM Radio Receiver Module

RDA5807M Stereo FM Radio Receiver Module

₹76.80
Hi, How can I help you today?
Chat Assistant