PH SENSOR MODULE

Analog pH sensor, specially designed for Arduino controllers is easy to use and can be used as a plug and play solution to measure pH value of a solution without any additional circuit required. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ?). For most hobbyist this great accuracy range and it’s low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. With a simple program to ready analog voltage, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage.

Build your own PH meter gadget, or a water monitoring station for your water tanks. This and our other water sensor devices could make for the ultimate water control device. Use it for your aquaponics or fish tanks or other materials that need measurements.

Applications:

• Water quality testing
• Aquaculture

Specification:

• Measuring Temperature: 0 – 60 ?
• Accuracy : ± 0.1pH (25 ?)
• pH Sensor with BNC Connector
• pH2.0 Interface ( 3 foot patch )
• Gain Adjustment Potentiometer
• Power Indicator LED
• Heating voltage : 5±0.2V (AC -• DC)
• Working current : 5-10mA
• The detection concentration range : PH 0-14
• The detection range of temperature : 0-80 centigrade
• The working temperature : -10~50 centigrade (the nominal temperature 20 centigrade)
• Working humidity : 95%RH (nominal humidity 65%RH)
• Service life : 3 years
• The output : analog voltage signal output

Need to measure water quality and other parameters but haven’t got any low cost pH meter? Find it difficult to use with Arduino? Our analog pH meter, specially designed for Arduino controllers and has convenient and practical connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ?). For most hobbyist this great accuracy range and it’s low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage.

Build your own PH meter gadjet, or a water monitoring station for your water tanks. This and our other water sensor devices could make for the ultimate water control device. Use it for your aquaponics or fish tanks or other materials that need measurements.

Note: buffer solutions are not included.

Product Includes:

• pH probe (BNC connector) x 1
• pH sensor circuit board x 1
• Analog cable x 1