-
1 × ₹249.00
-
1 × ₹560.00
-
1 × ₹80.00
-
1 × ₹1.50
-
1 × ₹10.00
-
1 × ₹110.00
-
1 × ₹125.00
-
1 × ₹1.00
-
1 × ₹110.00
-
1 × ₹59.00
-
1 × ₹100.00
-
1 × ₹1,199.00
-
1 × ₹280.00
-
1 × ₹60.00
-
1 × ₹59.00
-
1 × ₹40.00
-
2 × ₹5.00
-
1 × ₹1.20
-
1 × ₹30.00
-
1 × ₹10.00
-
1 × ₹250.00
-
1 × ₹150.00
-
1 × ₹1.50
-
1 × ₹50.00
-
1 × ₹200.00
-
1 × ₹399.00
-
1 × ₹5.00
-
1 × ₹1.00
-
1 × ₹749.00
COMING SOON
Roll over image to zoom in
MKS GEN V 1.4 CONTROLLER
₹2,999.00
-
MEGA 2560 and RAMPS 1.4 set on a board, to solve complicated RAMPS 1.4 combination of interfaces, the problem of failure prone.
-
Support up to 5 motor driver (A4988 or DRV8825) .
-
The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.
-
Using high-quality MOSFET, and better heat dissipation.
-
Using a dedicated power chip, support 12V-24V power input, the voltage converter chip to solve the heat problem Ramps.
-
Can accept 24V input power under the same system can be hot-bed current is reduced to 1/4, an effective solution to the hot bed MOS pipe heat problems.
-
The firmware can use open source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
-
Can be directly connected to the control panel and 12864LCD Ramps1.4,2004LCD control panel.
-
Reserved for motor pulse and direction output ports for easy plug-in high-current To add a large current (eg 2A, 5A) motor drive circuit.
-
Reserved Ramps1.4 on Servos, AUX-1, AUX-2 interface that provides three 5V output, three 12V outputs.
Additional information
Weight | 150 g |
---|---|
Dimensions | 150 × 90 × 20 mm |
Reviews
There are no reviews yet.