Roll over image to zoom in
SIM800L GPRS GSM MODULE
₹215.00
You save
SIM800L GSM GPRS Module Board is a compact and powerful GSM/GPRS module that allows your microcontroller or embedded system to communicate over cellular networks. It supports SMS, voice, data, and GPRS services, making it ideal for a wide range of applications, including IoT, remote monitoring, and wireless communication. The module operates on GSM/GPRS networks and can be used to make phone calls, send SMS messages, and connect to the internet via GPRS.
Key Features of SIM800L GSM GPRS Module Board:
-
- Quad-band GSM/GPRS: Supports frequencies of 850MHz, 900MHz, 1800MHz, and 1900MHz for global compatibility.
- SMS, Voice, and Data Communication: Supports sending/receiving SMS, making voice calls, and transferring data via GPRS.
- Low Power Consumption: Efficient power usage makes it suitable for battery-operated applications.
- Small Form Factor: Compact design for easy integration into various projects and devices.
- Easy to Interface: Uses standard serial communication (UART) for easy integration with microcontrollers like Arduino and ESP32.
- Supports AT Commands: Fully programmable with AT commands for configuration and control.
Technical Specifications of SIM800L GSM GPRS Module Board:
-
- Model: SIM800L
- Operating Voltage: 3.4V to 4.4V (typically 3.7V)
- GSM Frequency Band: 850/900/1800/1900 MHz (Quad-band)
- Interface: UART (Serial communication)
- Data Rate: GPRS multi-slot class 12, up to 85.6 kbps
- SMS Support: Send/receive text and PDU mode SMS
- Voice Communication: Supports two-way voice calls and hands-free functionality.
- Power Consumption: Low standby current (approx. 1mA) and transmit power (approx. 2W during transmission)
- Temperature Range: -40°C to +85°C
- Dimensions: Approximately 27mm x 25mm
- Weight: Approximately 3 grams
Mechanical Specifications of SIM800L GSM GPRS Module Board:
-
- Dimensions: 27mm x 25mm
- Mounting Holes: Yes, for easy PCB integration.
- Weight: Approximately 3 grams
- PCB Material: FR4, with clear silkscreen labeling for easy identification.
Schematic Diagram, Connection, Wiring, and Pinout of SIM800L GSM GPRS Module Board:
-
- Schematic Diagram: Features the SIM800L chip, power supply, and UART pins for communication with the microcontroller.
- Connection Steps:
- 1. Connect the VCC pin to a 3.7V to 4.2V power supply (typically from a Li-ion battery).
- 2. Connect the GND pin to ground.
- 3. Connect the TX pin of SIM800L to the RX pin of your microcontroller (e.g., Arduino).
- 4. Connect the RX pin of SIM800L to the TX pin of your microcontroller.
- 5. Optionally, connect the RST pin to reset the module from the microcontroller.
- 6. Connect the antenna for GSM signal reception.
- Pinout:
- VCC: Power supply input (3.7V to 4.4V)
- GND: Ground
- TX: Transmit data (from SIM800L to microcontroller)
- RX: Receive data (from microcontroller to SIM800L)
- RST: Reset pin for module control
- NET: Network status indicator (can be used to check signal strength)
- ANT: Antenna connection
Applications of SIM800L GSM GPRS Module Board:
-
- IoT Projects: Ideal for adding cellular connectivity to IoT devices for remote communication.
- Remote Monitoring: Use for sending sensor data over the cellular network for remote monitoring.
- SMS-based Control Systems: Control devices remotely by sending SMS commands.
- Vehicle Tracking Systems: Use in GPS-based tracking systems that send location data via SMS or GPRS.
- Home Automation: Send commands to home automation systems through SMS or phone calls.
Equivalent Models of SIM800L GSM GPRS Module Board:
-
- SIM900 GSM Module: A similar GSM module with slightly different features, including GPRS and SMS support.
- SIM808 GSM/GPS Module: A combined GSM/GPS module, ideal for GPS-based communication and tracking projects.
Datasheet:
Keywords for SIM800L GSM GPRS Module Board:
-
- SIM800L
- GSM Module
- GPRS Module
- IoT Module
- SMS Module
- GSM Communication
Package Includes:
-
- 1 x Mini Smallest SIM800L GPRS GSM Module MicroSIM Card Core Wireless Board Quad-band TTL Serial Port With Antenna
Additional information
Weight | 10 g |
---|---|
Dimensions | 23 × 35 × 5.5 mm |
Reviews
There are no reviews yet.