MIC803-30D3VC3-TR Voltage Supervisor IC – 3.0V Reset Active High SOT-23

65.00

In stock (can be backordered)

Category: Brand:

MIC803-30D3VC3-TR Voltage Supervisor IC – 3.0V Reset Active High SOT-23 is a critical, highly integrated component that ensures the reliable operation of digital systems by constantly monitoring the power supply voltage. This specific device is programmed for a precise 3.0V trip threshold and outputs an active-high reset signal (RESET) to the host microcontroller or digital circuit. Consequently, when the VCC voltage dips below the nominal 3.0V threshold (VTH), the IC immediately asserts the RESET signal, forcing the system into a known state, which prevents data corruption or erratic execution. Furthermore, its small SOT-23 package and low power consumption make the MIC803-30D3VC3-TR an ideal choice for portable, battery-powered equipment and any embedded application demanding high integrity and compact design.

Key Features:
  • Fixed Precision Threshold: The IC provides a highly accurate, factory-programmed voltage trip point of 3.0V (±1.5% accuracy at 25°C).
  • Active-High Reset Output: Drives the RESET pin high when the supply voltage drops below 3.0V, making it compatible with many standard logic inputs.
  • Built-in Reset Delay: Features an integrated 140 ms (min) power-on reset (TPD) delay time, ensuring stable system initialization after power-up.
  • Low Current Consumption: Typically draws less than 3 μA of quiescent current, significantly extending battery life in portable electronics.
  • SC-70/SOT-323 Compatibility: Packaged in the ultra-small SOT-23-3 format, therefore, minimizing PCB footprint.
Technical Specifications:
  • Monitoring Threshold (VTH): 3.0 V (Nominal)
  • Threshold Accuracy: ±1.5% at +25°C
  • Reset Output Type: Push-Pull, Active High (RESET)
  • Minimum Reset Timeout Period (TPD): 140 ms (Ensures stable power-up)
  • Supply Voltage Range (VCC): 1.0 V to 5.5 V
  • Quiescent Current (IQ): Typically 2.5 μA
  • Operating Temperature Range: −40°C to +125°C (Automotive/Industrial Grade)
Mechanical Specifications:
  • Package Type: SOT-23-3 (Surface Mount Technology)
  • Soldering: Suitable for standard reflow soldering profiles.
  • Moisture Sensitivity Level (MSL): MSL 1 (Unlimited floor life at ≤30°C/85% RH)
Dimensions:
  • Body Length: ≈ 2.9 mm
  • Body Width: ≈ 1.3 mm
  • Body Height: ≈ 1.0 mm
  • Pin Pitch: 0.95 mm
  • Footprint: Ultra-compact SOT-23-3 outline.
Pinout and Wiring:
  • Pin 1 (VCC): Connect to the monitored power supply voltage (e.g., 3.3V, 5V).
  • Pin 2 (GND): Connect to the circuit ground reference (0V).
  • Pin 3 (RESET): Connect directly to the reset input pin of the microcontroller (MCU) or peripheral. This pin goes high when VCC is below 3.0V.
  • Wiring Note: Place a small bypass capacitor (e.g., 0.1 μF) between VCC and GND near the IC to ensure clean voltage monitoring.
Datasheet Reference:
  • Download MIC803 Voltage Supervisor Datasheet
Commonly Used in:
  • Portable Devices: Used widely in mobile phones, tablets, and wearable electronics where reliable battery monitoring is essential.
  • Microcontroller Systems: Providing mandatory power-on reset and brown-out protection for low-power MCUs (e.g., PIC, MSP430).
  • Data Acquisition Equipment: Ensuring the integrity of collected data during power fluctuations.
Applications:
  • Power-Up Reset Generation: Guarantees the MCU starts in a known, stable state after power is applied.
  • Brown-Out Protection (BOP): Prevents erratic operation when the supply voltage drops transiently below the minimum operating level.
  • Battery Monitoring: Signals a low-battery condition in systems where the 3.0V threshold represents a critical low level.
Equivalent Models:
  • MAX803 (Maxim Integrated): A functionally identical voltage monitor series with a similar pinout and 3.0V threshold option.
  • TLV803 (Texas Instruments): An alternative 3-pin SOT-23 supervisor offering equivalent precision and reset functionality.
  • ADM803 (Analog Devices): Another direct competitor with a fixed 3.0V trip point, however, verify the specific reset output polarity before substitution.
Package Includes:
  • 1 x MIC803-30D3VC3-TR Voltage Supervisor IC SOT-23

Additional information

Weight .5 g
Be the first to review “MIC803-30D3VC3-TR Voltage Supervisor IC – 3.0V Reset Active High SOT-23”

Reviews

There are no reviews yet.

error:

Main Menu

MIC803-30D3VC3-TR Voltage Supervisor IC - 3.0V Reset Active High SOT-23

MIC803-30D3VC3-TR Voltage Supervisor IC - 3.0V Reset Active High SOT-23

65.00

Add to cart
Hi, How can I help you today?
Chat Assistant