MAX3232 RS232 TO TTL SERIAL PORT CONVERTER

This RS232 to TTL Serial Interface Module is a board with the MAX3232 transceiver integrated circuit (IC). It facilitates serial communication between TTL and RS232 ports by providing the necessary electrical signal conversion.

These boards usually have a DB9 connector soldered at one end, and four header pins with jumper cables at the other end. The jumper cables enable the user to connect the wires to a breadboard or a microcontroller project board, whilst the DB9 connects directly to a COM port of a computer.

The MAX3232CSE IC, which comes in a 16 pin narrow SO package. It requires between 3.0 V to 5.5 V to operate and has two receivers and two transmitters. It has a maximum guaranteed data rate of 120 kbps, and the circuitry requires four 0.1µF charge-pump support capacitors. It is also compatible with the famous MAX3232 IC pins. These boards connect to systems with a UART  hence, they work with ATMEL and PIC microcontrollers.

MAX3232 RS232 Serial Port To TTL Converter Module DB9 Connector 5V RS232 to TTL Female Serial TTL serial modules / Brush board. This module can be used to the serial port of microcontroller module expand DVD, router, hard drive and other equipment to upgrade.

• • Working voltage:3.3V-5.5V
  • Communication chip: domestic MAX3232.
  • It is widely used in radio modification, phone flash, XBOX360 flash, GPS, vehicle detection,
  • DVD flash, hard disk repair set-top box upgrade.
  • It can be use to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU

Package Includes:

• • 1 X RS232 to TTL Serial Port Converter DB9 MAX3232 Connector Module