KY-022 VS1838B Infrared IR Receiver Sensor Module is a universal 38 kHz infrared remote control receiver breakout board equipped with a high-sensitivity VS1838B / HX1838 optical photodetector. Featuring integrated internal bandpass filtering, automatic gain control (AGC), and an onboard signal demodulation IC, it allows microcontrollers such as Arduino, ESP32, and Raspberry Pi to reliably decode IR signals from standard handheld TV and audio remotes.
Key Features:
- Miniature Receiver with Demodulator: High-sensitivity VS1838B IR photodiode and preamplifier encapsulated within an epoxy shield package.
- Internal 38 kHz Bandpass Filter: Effectively filters out optical interference from sunlight, ambient fluorescent lights, and CFL fixtures.
- Built-in Automatic Gain Control: Integrated AGC circuit dynamically adjusts receiver gain for stable reception across long distances.
- Demodulated Active-LOW Output: Directly outputs demodulated TTL digital pulses ready for software decoding using IRremote libraries.
- Status Indicator LED: Onboard activity LED flashes synchronously with received incoming infrared pulse trains.
- Low Power Consumption: Consumes less than 1.5 mA during active receiving, suitable for energy-efficient battery designs.
Technical Specifications:
- Operating Logic Voltage: 2.7V to 5.5V DC (recommended 3.3V or 5.0V DC)
- Operating Current: 0.4 mA to 1.5 mA
- Carrier Frequency: 38 kHz resonant reception frequency
- Peak Sensitivity Wavelength: 940 nm infrared spectrum
- Reception Distance: Up to 18 meters (line-of-sight indoors)
- Reception Angle: ±45 degrees conical field of view
- Output Logic Level: TTL Active LOW when carrier pulse burst is detected; HIGH at rest
- Operating Temperature: -20°C to +85°C
Mechanical Specifications:
- Form Factor: Standard rectangular sensor breakout module
- PCB Construction: Double-sided FR4 fiberglass board with green solder mask
- Mounting: Standard breadboard plug-in or standoff mounting
- Header Type: 3-pin male header with 2.54mm pitch
- Weight: Approximately 3.0 g
Dimensions:
- Overall Length: 25.0 mm
- Overall Width: 15.0 mm
- Overall Height: 12.0 mm
Pinout and Wiring:
- – (GND): Connects to system power ground reference (0V)
- + (VCC): Connects to positive DC power supply (+3.3V to +5V DC)
- S (Signal / OUT): Demodulated active-LOW digital output connected to microcontroller GPIO interrupt pin
Datasheet Reference:
- Refer to the Vishay VS1838B Infrared Receiver Modules for Remote Control Systems datasheet for optical frequency selectivity curves, burst length timings, and AGC noise immunity thresholds.
Commonly Used in:
- Infrared remote-controlled consumer appliances, air conditioners, fans, and home audio players
- Smart home automation hubs decoding handheld TV remote commands to switch mains relays
- Robotics wireless remote steering and obstacle boundary beacons
- STEM classroom electronics tutorials teaching pulse-code modulation (PCM) and NEC protocol decoding
Applications:
- Handheld IR remote control decoder
- Home entertainment automation interface
- Robotics wireless control link
- IR optical tripwire and beam interruption receiver
- Microcontroller user input interface
Equivalent Models:
- VS1838B Standalone IR Receiver Diode
- TSOP38238 / TSOP4838 IR Receiver Modules
- HX1838 Infrared Sensor Breakout
- Keyestudio IR Receiver Module
Package Includes:
- 1 × KY-022 VS1838B Infrared IR Receiver Sensor Module




Reviews
No reviews yet. Be the first to share your experience!