HC-05 Bluetooth Module with TTL Output is a versatile wireless communication module that enables serial data transmission between devices via Bluetooth 2.0+EDR technology. With its built-in 3.3V regulator and TTL-level UART interface, it’s ideal for Arduino projects, wireless data logging, and IoT applications.
Key Features of HC-05 Bluetooth Module:
-
- Bluetooth 2.0+EDR: Supports both master and slave modes
- TTL Serial Interface: Direct connection to microcontrollers
- Built-in Voltage Regulator: 3.3V operation with 5V tolerant inputs
- Configurable Baud Rate: 9600-1382400bps (default 38400bps)
- LED Status Indicator: Visual feedback for connection status
Technical Specifications:
-
- Bluetooth Version: 2.0+EDR (Enhanced Data Rate)
- Operating Voltage: 3.6-6V DC (5V recommended)
- Communication Range: Up to 10 meters (open space)
- Current Consumption: 30mA (operating), <1mA (sleep)
- UART Interface: TTL level (3.3V logic)
- Frequency: 2.4GHz ISM band
- Dimensions: 36mm × 15mm × 11mm
Pin Configuration:
-
- VCC: Power input (3.6-6V DC)
- GND: Ground connection
- TXD: Transmit data (3.3V TTL)
- RXD: Receive data (3.3V TTL)
- STATE: Connection status indicator
- EN/KEY: Mode control (AT command mode when high)
Connection Guide:
-
- Arduino Connection:
- HC-05 VCC → Arduino 5V
- HC-05 GND → Arduino GND
- HC-05 TXD → Arduino RX (pin 0)
- HC-05 RXD → Arduino TX (pin 1) with voltage divider
- Important Notes:
- Use 1kΩ+2kΩ resistor divider for 5V to 3.3V conversion
- Disconnect during programming to avoid interference
- Default pairing code: “1234”
- Arduino Connection:
AT Command Mode Configuration:
-
- 1. Power on while holding EN/KEY pin high
- 2. Send “AT” (should return “OK”)
- 3. Common commands:
- AT+NAME? – Check device name
- AT+PSWD? – Check pairing code
- AT+UART? – Check baud rate
Applications:
-
- Wireless Data Transfer: Serial communication between devices
- Arduino Projects: Remote control and monitoring
- IoT Devices: Wireless sensor networks
- Robotics: Bluetooth-controlled robots
- DIY Electronics: Home automation systems
Equivalent Modules:
Datasheet:
Keywords:
-
- HC-05 Bluetooth Module
- Bluetooth Serial Module
- TTL Bluetooth Transceiver
- Arduino Bluetooth Module
- Wireless Serial Communication
Package Includes:
-
- 1 x HC-05 Bluetooth Module with TTL Output
Additional information
Weight | 5 g |
---|---|
Dimensions | 35 × 15 × 4 mm |
INPUT VOLTAGE | 3.3v |
Reviews
There are no reviews yet.