Back to Category
Shop By Departments

FM Mini Wireless Microphone Transmitter Module

₹153.60

In stock ?

In stock

SKU: BR1-IFT-030-01 Category: Brand:

Miniature FM Wireless Microphone Transmitter Module (High-Sensitivity Audio Pick-up) is an ultra-compact radio frequency audio broadcaster designed to capture acoustic voice signals and transmit them across standard FM radio receiver bands. Built using a high-gain S9018 RF silicon transistor oscillator circuit and an onboard high-sensitivity electret microphone, consequently, this miniature transmitter converts spoken words and ambient environmental sounds into frequency-modulated RF waves. Furthermore, it operates reliably across a wide input voltage range from 1.5V up to 9V DC, making it exceptionally adaptable for powering from a single AA cell, button batteries, or rechargeable lithium cells. The carrier frequency is centered within the commercial 88 MHz to 108 MHz FM broadcast band and can be manually adjusted by tuning the onboard inductors. The module features an ultra-small PCB profile that easily conceals within compact project boxes, educational models, or handheld enclosures. Delivering strong RF transmission with clear audio fidelity up to 50 meters in open terrain, therefore, this wireless microphone board provides an accessible and educational RF broadcasting platform.

Key Features:
  • Standard FM Band Broadcasting: Transmits within 88.0 MHz to 108.0 MHz, easily received on any standard FM radio receiver.
  • Onboard Electret Capsule: Highly sensitive electret microphone picks up subtle room conversations and vocal speech clearly.
  • Ultra-Low Power Consumption: Consumes only 3 mA to 10 mA, allowing prolonged battery operation from miniature coin cells.
Technical Specifications:
  • Operating Voltage Range: 1.5 V to 9.0 V DC (3.0 V to 3.7 V DC optimal nominal)
  • Operating Current Draw: ≈ 3 mA at 3V DC; ≈ 8 mA at 9V DC
  • Operating Frequency: 88.0 MHz to 108.0 MHz adjustable
  • Modulation Type: Frequency Modulation (FM)
  • Transmission Range: 10 m to 50 m (dependent on supply voltage and antenna configuration)
  • RF Output Transistor: S9018 NPN RF transistor (fT = 800 MHz transition frequency)
  • Audio Input: High-sensitivity omnidirectional electret condenser microphone
  • Antenna Length: 30 cm to 70 cm flexible insulated copper wire recommended
Mechanical Specifications:
  • Substrate / Package: High-grade FR4 double-sided PCB or molded protective casing
  • Terminal Connection: Standard 2.54 mm pitch through-hole solder pins or screw terminal block
  • Mounting Support: Integrated chassis mounting holes compatible with M2.5 / M3 hardware
  • Form Factor: Low-profile footprint engineered for tight embedded enclosures
Dimensions:
  • Body Length: Standard miniature hardware dimensions
  • Body Width: Optimized narrow profile for modular stacking
  • Pin Pitch: 2.54 mm (0.1 inch) breadboard-compatible spacing
  • Net Weight: Ultra-lightweight construction for portable and mobile robotics
Pinout and Wiring:
  • VCC (+): Connect to positive DC power supply rail (1.5V to 9V DC).
  • GND (-): Connect to negative DC power supply ground return rail.
  • ANT: RF antenna solder pad; attach a 50 cm insulated wire lead for optimal radio transmission.
  • MIC: Electret microphone connection terminals soldered on the board face.
  • L (Coil): Copper air-core inductor; adjust spacing slightly to tune carrier frequency.
Datasheet Reference:
Commonly Used in:
  • Wireless Audio Surveillance: Concealed acoustic monitoring for security prototyping and baby listening monitors.
  • Classroom Teaching Microphones: Broadcasting teacher vocal instructions wirelessly to portable radio receivers.
  • Amateur Radio Experiments: Providing hands-on VHF FM modulation and RF transmission experiments for science fairs.
Applications:
  • Theatrical Wireless Mics: Concealing voice transmitters within theatre stage sets and drama costumes. Discover our audio amplifier modules for PA speaker driving.
  • Acoustic Telemetry: Transmitting acoustic noise feedback from rotating machinery to remote observation points.
  • Portable Walkie-Talkie Prototypes: Developing compact one-way voice communication systems for remote workshops.
Equivalent Models:
  • Pin-Compatible Industry Equivalent: Standard commercial equivalent module with matched pinouts and voltage ratings.
  • Integrated Breakout Alternative: Surface-mount IC alternative offering equivalent functional performance.
  • High-Precision Variant: Alternative sensor series offering calibrated digital bus communication, whereas this module provides straightforward plug-and-play operation.
Package Includes:
  • 1 × FM Mini Wireless Microphone Transmitter Module
Weight 10 g
Dimensions 40 × 20 × 5 mm

Questions and Answers

No questions have been asked about this product yet. Be the first!


Ask a Question

Average Rating
5.00
1 Review
5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Add a review

You must be logged in to post a review.

1 Review For This Product

  1. by Dhirendra Kumar | October 19, 2022

    Good

FM Mini Wireless Microphone Transmitter Module

FM Mini Wireless Microphone Transmitter Module

₹153.60
Hi, How can I help you today?
Chat Assistant