ESP8266-12E WIFI WIRELESS IOT BOARD MODULE
₹120.00
You save
Frequently Bought Together
- This item: ESP8266-12E WIFI WIRELESS IOT BOARD MODULE(
₹120.00
You save ) - ESP-12F/ESP-12E SERIAL WIFI WIRELESS ADAPTER(
₹149.00
You save ) - ESP8266 SERIAL WIFI MODULE ADAPTER(
₹25.00
You save ) - L1117-LDO3V3 LINEAR VOLTAGE REGULATOR SOT-223(
₹5.00
You save ) - WIFI ESP8266 DOUBLE SIDE PROTOTYPE PCB BREADBOARD(
₹85.00
You save )
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. This module comes with AT commands firmware which allows you to get functionality like arduino wifi shield, however you can load different firmwares to make your own applicaiton on the modules’ memory and processor. Its a very economic module and has a huge and growing community support.
This module has onboard 80Mhz low power 32 bit processor which can be used for custom firmwares. This also means that you can host small webpages without any external controller. For more details see : NODEMCU . The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF parts.
ESP8266 is transforming the world with its low cost and high features which makes it an ideal module for Internet Of Things (IOT). It can be used in any application where you need to connect a device to your local network or internet.
This module ESP-12 has 7 GPIOs.
Note: The ESP8266 Module is compatible only with 3.3V logic level and will not work directly with 5V devices (for both serial and GPIO access). You need a 3.3V compatible device or you will need to convert the levels before you use it.
Features:
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 1.1 / 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- Access Point and Station Modes
Known as : Esp12E , Esp-12E, Esp8266-12E, Esp826612E
Additional information
| Weight | 10 g |
|---|---|
| Dimensions | 25 × 17 × 3.5 mm |
Reviews
There are no reviews yet.