CC2540 / CC2531 Zigbee & BLE Packet Sniffer USB Dongle provides a hardware RF protocol analyzer engineered for capturing, decoding, and debugging 2.4GHz Zigbee, IEEE 802.15.4, and Bluetooth Low Energy packets. Consequently, the dongle pairs Texas Instruments CC2531/CC2540 radio hardware directly with PC protocol inspection software like Wireshark and SmartRF Packet Sniffer. Furthermore, the compact USB stick integrates an onboard PCB antenna, debugging header, and user-programmable LEDs and buttons. Therefore, this versatile hardware dongle serves as an essential development tool for IoT firmware engineers, Zigbee2MQTT smart home gateways, and wireless security researchers.
Key Features:
- Real-Time 2.4GHz RF Packet Capture: Intercepts wireless packets on-the-fly across IEEE 802.15.4, Zigbee, and BLE channels.
- Native Wireshark & TI SmartRF Support: Seamlessly streams live RF capture frames directly into Wireshark for deep protocol inspection.
- Zigbee2MQTT Coordinator Compatible: Can be flashed with coordinator firmware to act as a universal Zigbee smart home bridge.
- Integrated Standard USB Type-A Plug: Plugs directly into PC, laptop, or Raspberry Pi USB ports without requiring cable adapters.
- Hardware Debugging Header: Includes a dedicated 10-pin miniature header for firmware flashing via CC Debugger.
Technical Specifications:
- Core SoC: Texas Instruments CC2531 / CC2540 8-Bit 8051 MCU with 2.4GHz RF Transceiver
- Operating Frequency: 2.405 GHz to 2.485 GHz
- Wireless Protocol Support: Zigbee, IEEE 802.15.4, Bluetooth Low Energy (BLE)
- Transmission Rate: Up to 250 kbps (Zigbee) / 1 Mbps (BLE)
- USB Standard: USB 2.0 Full Speed (12 Mbps)
- Supply Voltage: 5.0V DC (Powered directly via USB port)
- Operating Current: <30 mA (Receiving/Sniffing)
Mechanical Specifications:
- Form Factor: USB Dongle Stick with Protective Transparent Heat Shrink Sleeve
- Antenna Type: Onboard High-Efficiency Meandered Inverted-F PCB Antenna
- Debug Interface: 10-Pin 1.27mm Pitch Tag-Connect / Header Pads
- Operating Temperature: -20°C to +70°C
Dimensions:
- Total Length: 41.0 mm
- Width: 16.0 mm
- Thickness: 7.0 mm
- Weight: Approximately 6.0 g
Pinout and Wiring:
- USB Pin 1 (VBUS): +5V DC power from host USB port.
- USB Pin 2 (D-): USB differential data negative line.
- USB Pin 3 (D+): USB differential data positive line.
- USB Pin 4 (GND): Ground reference power return.
- Debug Header: Provides DC, DD, RESET, VDD, and GND for flashing with TI CC Debugger.
Datasheet Reference:
Commonly Used in:
- Home Assistant and Zigbee2MQTT universal smart home bridges.
- Wireless IoT security auditing, penetration testing, and vulnerability research.
- Firmware debugging laboratories validating custom IEEE 802.15.4 networks.
Applications:
- Sniffing encrypted and unencrypted Zigbee smart plug and light bulb traffic.
- Debugging custom BLE advertising beacons and telemetry nodes.
- Coordinating multi-vendor Zigbee mesh networks from a Raspberry Pi.
Equivalent Models:
- Sonoff Zigbee 3.0 USB Dongle Plus: Modern CC2652P coordinator offering higher RF power and external antenna.
- nRF52840 Dongle: Nordic Semiconductor USB dongle supporting BLE 5.0, Zigbee, and Thread.
- Ubertooth One: Dedicated open-source 2.4GHz wireless development platform for Bluetooth experimentation.
Package Includes:
- 1 × CC2540 / CC2531 Zigbee & BLE Packet Sniffer USB Dongle

Reviews
No reviews yet. Be the first to share your experience!